Zobacz nowe normy (czerwiec 2014)! | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – norm opublikowane w czerwcu 2014 | ISO.org – norm opublikowane w czerwcu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – norm opublikowane w czerwcu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – norm opublikowane w czerwcu 2014

Nowe normy międzynarodowe opublikowane od 01 do 30 czerwca 2014

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

TC 2

Fasteners

ISO 10683:2014 Fasteners — Non-electrolytically applied zinc flake coatings

TC 6

Paper, board and pulps

ISO 2759:2014 Board — Determination of bursting strength

TC 8

Ships and marine technology

ISO 17325-1:2014 Ships and marine technology — Marine environment protection — Oil booms — Part 1: Design requirements

TC 17

Steel

ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality

TC 20

Aircraft and space vehicles

ISO 17808:2014 Space data and information transfer systems — Telemetry (TM) channel coding profiles
ISO 17809:2014 Space data and information transfer systems – Delta-differential one-way ranging (Delta-DOR) operations
ISO 17810:2014 Space data and information transfer systems — Data transmission and pseudo-random noise (PN) ranging for 2 GHz code division multiple access (CDMA) link via data relay satellite
ISO 19389:2014 Space data and information transfer systems — Conjunction data message

TC 21

Equipment for fire protection and fire fighting

ISO 7240-15:2014 Fire detection and alarm systems — Part 15: Point-type fire detectors using smoke and heat sensors

TC 22

Road vehicles

ISO 19072-1:2014 Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition
ISO 2575:2010/Amd 3:2014 Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 3
ISO 12619-1:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 1: General requirements and definitions
ISO 12619-2:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 2: Performance and general test methods
ISO 12619-3:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 3: Pressure regulator
ISO 16380:2014 Road vehicles — Blended fuels refuelling connector

TC 24

Particle characterization including sieving

ISO 13099-3:2014 Colloidal systems — Methods for zeta potential determination — Part 3: Acoustic methods

TC 29

Small tools

ISO/TS 13399-201:2014 Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts

TC 34

Food products

ISO/TS 17758:2014 Instant dried milk — Determination of the dispersibility and wettability
ISO 3493:2014 Vanilla — Vocabulary
ISO 8586:2012 Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
ISO 8589:2007/Amd 1:2014 Sensory analysis — General guidance for the design of test rooms — Amendment 1

TC 35

Paints and varnishes

ISO 3233-2:2014 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle

TC 38

Textiles

ISO 13629-2:2014 Textiles — Determination of antifungal activity of textile products — Part 2: Plate count method
ISO 16373-2:2014 Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water)
ISO 16373-3:2014 Textiles — Dyestuffs — Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)
ISO 12945-3:2014 Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting — Part 3: Random tumble pilling method

TC 43

Acoustics

ISO 10140-5:2010/Amd 1:2014 Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment — Amendment 1: Rainfall sound

TC 44

Welding and allied processes

ISO 15614-12:2014 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
ISO 14555:2014 Welding — Arc stud welding of metallic materials
ISO 9455-5:2014 Soft soldering fluxes — Test methods — Part 5: Copper mirror test

TC 45

Rubber and rubber products

ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification
ISO/TR 16098:2012 Reclaimed rubbers and reclaimed crumb rubbers — Evaluation of dispersion in rubber mixes

TC 51

Pallets for unit load method of materials handling

ISO 18333:2014 Pallets for materials handling — Quality of new wooden components for flat pallets

TC 58

Gas cylinders

ISO 14246:2014 Gas cylinders — Cylinder valves — Manufacturing tests and examinations

TC 59

Buildings and civil engineering works

ISO 11617:2014 Buildings and civil engineering works — Sealants — Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling

TC 61

Plastics

ISO 10350-1:2007/Amd 1:2014 Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1
ISO 11403-1:2014 Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
ISO 11403-3:2014 Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
ISO 11357-4:2014 Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
ISO 11358-2:2014 Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
ISO/TR 17801:2014 Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1
ISO 9988-2:2006 Plastics — Polyoxymethylene (POM) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

TC 69

Applications of statistical methods

ISO 22514-1:2014 Statistical methods in process management — Capability and performance — Part 1: General principles and concepts
ISO 22514-8:2014 Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process

TC 72

Textile machinery and accessories

ISO 9902-1:2001/Amd 2:2014 Textile machinery — Noise test code — Part 1: Common requirements — Amendment 2
ISO 9902-2:2001/Amd 2:2014 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery — Amendment 2
ISO 9902-3:2001/Amd 2:2014 Textile machinery — Noise test code — Part 3: Nonwoven machinery — Amendment 2
ISO 9902-4:2001/Amd 2:2014 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
ISO 9902-5:2001/Amd 2:2014 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 2
ISO 9902-6:2001/Amd 2:2014 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery — Amendment 2
ISO 9902-7:2001/Amd 2:2014 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery — Amendment 2

TC 85

Nuclear energy, nuclear technologies, and radiological protection

ISO 15366-1:2014 Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range
ISO 15366-2:2014 Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 2: Samples containing plutonium and uranium in the nanogram range and below
ISO 15646:2014 Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets

TC 87

Cork

ISO 20752:2014 Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)

TC 96

Cranes

ISO 9374-3:2014 Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes

TC 110

Industrial trucks

ISO 22915-3:2014 Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks
ISO 22915-5:2014 Industrial trucks — Verification of stability — Part 5: Single-side-loading trucks

TC 113

Hydrometry

ISO 11657:2014 Hydrometry — Suspended sediment in streams and canals — Determination of concentration by surrogate techniques

TC 121

Anaesthetic and respiratory equipment

ISO 18082:2014 Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases

TC 123

Plain bearings

ISO 3548-1:2014 Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test
ISO/TR 17606:2014 Plain bearings — Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines

TC 135

Non-destructive testing

ISO 12715:2014 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams

TC 138

Plastics pipes, fittings and valves for the transport of fluids

ISO 8779:2010/Amd 1:2014 Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications — Amendment 1

TC 147

Water quality

ISO 17289:2014 Water quality — Determination of dissolved oxygen — Optical sensor method

TC 149

Cycles

ISO 4210-1:2014 Cycles — Safety requirements for bicycles — Part 1: Terms and definitions
ISO 4210-2:2014 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
ISO 4210-3:2014 Cycles — Safety requirements for bicycles — Part 3: Common test methods
ISO 4210-4:2014 Cycles — Safety requirements for bicycles — Part 4: Braking test methods
ISO 4210-5:2014 Cycles — Safety requirements for bicycles — Part 5: Steering test methods
ISO 4210-6:2014 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
ISO 4210-7:2014 Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods
ISO 4210-8:2014 Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
ISO 4210-9:2014 Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods
ISO 8098:2014 Cycles — Safety requirements for bicycles for young children

TC 150

Implants for surgery

ISO 23317:2014 Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials

TC 156

Corrosion of metals and alloys

ISO 7539-10:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
ISO 7539-11:2013 Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique

TC 160

Glass in building

ISO 11485-1:2011 Glass in building — Curved glass — Part 1: Terminology and definitions
ISO 11485-2:2011 Glass in building — Curved glass — Part 2: Quality requirements

TC 163

Thermal performance and energy use in the built environment

ISO 10916:2014 Calculation of the impact of daylight utilization on the net and final energy demand for lighting

TC 172

Optics and photonics

ISO 10343:2014 Ophthalmic instruments — Ophthalmometers

TC 173

Assistive products for persons with disability

ISO 7176-19:2008 Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles
ISO/TR 13570-2:2014 Wheelchairs — Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5

TC 180

Solar energy

ISO 22975-3:2014 Solar energy — Collector components and materials — Part 3: Absorber surface durability

TC 185

Safety devices for protection against excessive pressure

ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices

TC 193

Natural gas

ISO 14532:2014 Natural gas — Vocabulary
ISO/TR 22302:2014 Natural gas — Calculation of methane number

TC 198

Sterilization of health care products

ISO 15883-1:2006/Amd 1:2014 Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1

TC 204

Intelligent transport systems

ISO 21217:2014 Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture

TC 206

Fine ceramics

ISO 17139:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of thermal expansion
ISO 17142:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at constant amplitude

TC 207

Environmental management

ISO 14045:2012 Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines

TC 210

Quality management and corresponding general aspects for medical devices

IEC/TR 80002-3:2014 Medical device software — Part 3: Process reference model of medical device software life cycle processes (IEC 62304)

TC 215

Health informatics

ISO/TS 17938:2014 Health informatics — Semantic network framework of traditional Chinese medicine language system

TC 219

Floor coverings

ISO 11856:2014 Textile floor coverings — Test methods for the determination of fibre bind using a Modified Martindale Machine
ISO 17984:2014 Machine-made textile floor coverings — Determination of dimensional changes after exposure to heat and/or water

TC 223

Societal security

ISO 22313:2012 Societal security — Business continuity management systems — Guidance

TC 242

Energy Management

ISO 50002:2014 Energy audits — Requirements with guidance for use

CASCO

Committee on conformity assessment

ISO/IEC TS 17022:2012 Conformity assessment — Requirements and recommendations for content of a third-party audit report on management systems
ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services

JTC 1

Information technology

ISO/IEC 17811-1:2014 Information technology — Device control and management — Part 1: Architecture
ISO/IEC 11694-6:2014 Identification cards — Optical memory cards — Linear recording method — Part 6: Use of biometrics on an optical memory card
ISO/IEC 24727-1:2014 Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture
ISO/IEC 17629:2014 Information technology — Office equipment — Method for measuring first print out time for digital printing devices
ISO/IEC 24734:2014 Information technology — Office equipment — Method for measuring digital printing productivity
ISO/IEC 14496-15:2014 Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in ISO base media file format
ISO/IEC TR 30112:2014 Information technology — Specification methods for cultural conventions

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków