Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w czerwcu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w czerwcu 2015 | ISO.org – normy opublikowane w czerwcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w czerwcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w czerwcu 2015

Nowe normy i standardy opublikowane w czerwcu 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grupa cenowa
TC 6 Paper, board and pulps
ISO 1762:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C A
TC 10 Technical product documentation
ISO 128-43:2015 * Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings A
ISO 14084-1:2015 * Process diagrams for power plants — Part 1: Specification for diagrams E
ISO 15519-2:2015 * Specifications for diagrams for process industry — Part 2: Measurement and control F
TC 17 Steel
ISO 4969:2015 * Steel — Etching method for macroscopic examination B
ISO 16573:2015 Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels B
ISO 377:2013 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing D
TC 20 Aircraft and space vehicles
ISO 8177:2015 * Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions A
ISO 10537:2010/Amd 1:2015 * Space data and information transfer systems — Encapsulation service — Amendment 1 XZ
ISO 12175:1994/Amd 1:2015 * Space data and information transfer systems — Standard formatted data units — Structure and construction rules — Amendment 1 G
ISO 13526:2010/Amd 1:2015 * Space data and information transfer systems — Tracking data message — Amendment 1 XZ
ISO 22666:2007/Amd 1:2015 * Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol — Amendment 1 XZ
TC 22 Road vehicles
ISO 11451-1:2015 * Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology D
ISO 11451-2:2015 * Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources D
ISO 11451-3:2015 * Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation G
ISO 11452-1:2015 * Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology E
ISO 11452-8:2015 * Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields C
ISO 3006:2015 * Road vehicles — Passenger car wheels for road use — Test methods B
ISO/TR 12349-2:2015 * Road vehicles — Dummies for restraint system testing — Part 2: Child dummies A
TC 27 Solid mineral fuels
ISO 502:2015 * Coal — Determination of caking power — Gray-King coke test C
ISO 12900:2015 * Hard coal — Determination of abrasiveness B
TC 29 Small tools
ISO 3317:2015 Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches A
TC 33 Refractories
ISO 22016:2015 Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods C
TC 34 Food products
ISO 27971:2015 Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology G
ISO/TS 17728:2015 Microbiology of the food chain — Sampling techniques for microbiological analysis of food and feed samples C
ISO 6495-1:2015 Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method B
ISO 12966-4:2015 Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determination by capillary gas chromatography D
TC 36 Cinematography
ISO 2939:2015 * Cinematography — Picture image area on 35 mm motion-picture release prints — Position and dimensions and analogue and digital photographic sound to picture record displacement A
ISO 2969:2015 * Cinematography — B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres — Specifications and measurements C
TC 38 Textiles
ISO 2061:2015 Textiles — Determination of twist in yarns — Direct counting method C
TC 39 Machine tools
ISO 230-7:2015 Test code for machine tools — Part 7: Geometric accuracy of axes of rotation G
ISO 10791-7:2014 Test conditions for machining centres — Part 7: Accuracy of finished test pieces D
ISO 11090-1:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 1: Single-column machines (cross-slide table type and fixed-table type) D
ISO 11090-2:2014 Test conditions for die sinking electro-discharge machines (die sinking EDM) — Testing of the accuracy — Part 2: Double-column machines (slide-head type) D
ISO 13041-5:2015 Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations E
TC 42 Photography
ISO 17850:2015 * Photography — Digital cameras — Geometric distortion (GD) measurements F
TC 43 Acoustics
ISO 10140-3:2010/Amd 1:2015 Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation — Amendment 1 XZ
TC 44 Welding and allied processes
ISO 3834-5:2015 Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 B
TC 45 Rubber and rubber products
ISO 34-1:2015 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces C
ISO 34-2:2015 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces B
ISO 6505:2015 Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals B
ISO 18517:2015 Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide A
ISO 19242:2015 * Rubber — Determination of total sulfur content by ion chromatography C
ISO 23794:2015 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance C
ISO 2028:2015 * Synthetic rubber latex — Preparation of dry polymer A
ISO 15825:2015 * Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry B
ISO 18852:2015 Rubber compounding ingredients — Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) B
ISO 4633:2015 * Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials B
TC 58 Gas cylinders
ISO 10286:2015 * Gas cylinders — Terminology A
TC 61 Plastics
ISO 13802:2015 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing E
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 16903:2015 Petroleum and natural gas industries — Characteristics of LNG, influencing the design, and material selection C
ISO/TS 17969:2015 * Petroleum, petrochemical and natural gas industries — Guidelines on competency for personnel E
ISO 15589-1:2015 Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines H
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds G
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8536-8:2015 Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion apparatus C
ISO 8536-9:2015 Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment B
ISO 8536-10:2015 Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment B
ISO 8536-11:2015 Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment B
TC 83 Sports and other recreational facilities and equipment
ISO/TR 20183:2015 * Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards A
ISO 10958-2:2015 * Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts A
ISO 11087:2015 Alpine ski-bindings — Retention devices — Requirements and test methods B
TC 94 Personal safety — Protective clothing and equipment
ISO 12312-2:2015 Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun B
ISO 11999-1:2015 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General F
ISO/TS 11999-2:2015 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 2: Compatibility B
ISO 11999-3:2015 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing D
ISO 11999-4:2015 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves C
TC 96 Cranes
ISO 9928-1:2015 Cranes — Crane operating manual — Part 1: General A
ISO 11660-2:2015 * Cranes — Access, guards and restraints — Part 2: Mobile cranes A
TC 102 Iron ore and direct reduced iron
ISO 10203:2015 * Iron ores — Determination of calcium  — Flame atomic absorption spectrometric method C
ISO 15633:2015 * Iron ores — Determination of nickel  — Flame atomic absorption spectrometric method C
TC 106 Dentistry
ISO 6872:2015 Dentistry — Ceramic materials E
ISO 16954:2015 Dentistry — Test methods for dental unit waterline biofilm treatment C
ISO 12836:2015 Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test methods for assessing accuracy D
TC 107 Metallic and other inorganic coatings
ISO 12670:2011 Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions A
ISO 12679:2011 Thermal spraying — Recommendations for thermal spraying C
ISO 27307:2015 Thermal spraying — Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing D
TC 112 Vacuum technology
ISO 27892:2010 Vacuum technology — Turbomolecular pumps — Measurement of rapid shutdown torque C
TC 113 Hydrometry
ISO/TR 9212:2015 * Hydrometry — Methods of measurement of bedload discharge D
TC 115 Pumps
ISO/ASME 14414:2015 Pump system energy assessment G
ISO 20361:2015 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy D
TC 117 Fans
ISO 5802:2001/Amd 1:2015 Industrial fans — Performance testing in situ — Amendment 1 XZ
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-71:2015 * Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment E
TC 130 Graphic technology
ISO 2834-2:2015 * Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks B
ISO 12646:2015 * Graphic technology — Displays for colour proofing — Characteristics B
ISO 17972-4:2015 * Graphic technology — Colour data exchange format (CxF/X) — Part 4: Spot colour characterisation data (CxF/X-4) B
ISO 18619:2015 * Image technology colour management — Black point compensation C
TC 134 Fertilizers and soil conditioners
ISO 17318:2015 * Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and mercury contents E
ISO 17322:2015 * Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU) F
ISO 17323:2015 * Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements A
TC 135 Non-destructive testing
ISO 18563-1:2015 Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments F
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 6259-3:2015 Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes B
TC 147 Water quality
ISO 13164-4:2015 Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting B
ISO 13168:2015 Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting C
ISO 16778:2015 Water quality — Calanoid copepod early-life stage test with Acartia tonsa F
TC 150 Implants for surgery
ISO 12891-1:2015 * Retrieval and analysis of surgical implants — Part 1: Retrieval and handling D
TC 153 Valves
ISO 5208:2015 * Industrial valves — Pressure testing of metallic valves C
ISO 15848-1:2015 Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 1: Classification system and qualification procedures for type testing of valves F
ISO 15848-2:2015 Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 2: Production acceptance test of valves A
TC 155 Nickel and nickel alloys
ISO 7530-1:2015 * Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese D
TC 156 Corrosion of metals and alloys
ISO 17093:2015 Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements C
ISO 18069:2015 Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids B
ISO 18086:2015 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria F
TC 164 Mechanical testing of metals
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing F
TC 172 Optics and photonics
ISO 10109:2015 * Optics and photonics — Guidance for the selection of environmental tests C
ISO 8036:2015 * Microscopes — Immersion liquids for light microscopy A
ISO 17123-8:2015 * Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 8: GNSS field measurement systems in real-time kinematic (RTK) D
ISO 11151-1:2015 Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and near-infrared spectral ranges B
ISO 11151-2:2015 Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral range B
ISO 13142:2015 * Electro-optical systems — Cavity ring-down technique for high-reflectance measurement C
ISO 17901-1:2015 * Optics and photonics — Holography — Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms C
ISO 17901-2:2015 * Optics and photonics — Holography — Part 2: Methods for measurement of hologram recording characteristics D
TC 173 Assistive products for persons with disability
ISO 7176-8:2014 Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths G
ISO/TS 16840-12:2015 Wheelchair seating — Part 12: Apparatus and method for cushion envelopment testing C
TC 174 Jewellery
ISO 18323:2015 Jewellery — Consumer confidence in the diamond industry B
TC 181 Safety of toys
ISO 8124-5:2015 * Safety of toys — Part 5: Determination of total concentration of certain elements in toys C
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 10258:2015 * Copper sulfide concentrates — Determination of copper content — Titrimetric methods D
ISO 15247:2015 * Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame atomic absorption spectrometric method C
TC 184 Automation systems and integration
ISO 11354-2:2015 * Advanced automation technologies and their applications — Requirements for establishing manufacturing enterprise process interoperability — Part 2: Maturity model for assessing enterprise interoperability C
TC 201 Surface chemical analysis
ISO 18337:2015 * Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope B
TC 210 Quality management and corresponding general aspects for medical devices
IEC 62304:2006/Amd 1:2015 * Medical device software — Software life cycle processes — Amendment 1 F
TC 211 Geographic information/Geomatics
ISO 19147:2015 * Geographic information — Transfer Nodes G
ISO 19150-2:2015 * Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language (OWL) H
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-22:2015 Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters C
ISO 16610-41:2015 Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters C
ISO 16610-61:2015 Geometrical product specification (GPS) — Filtration
— Part 61: Linear areal filters — Gaussian filters
C
ISO 25178-606:2015 Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments E
TC 216 Footwear
ISO 10750:2015 Footwear — Test method for slide fasteners — Attachment strength of end stops B
TC 226 Materials for the production of primary aluminium
ISO 18843:2015 * Aluminium oxide primarily used for the production of aluminium — Method for the determination of flow time A
TC 229 Nanotechnologies
ISO/TS 80004-2:2015 * Nanotechnologies — Vocabulary — Part 2: Nano-objects B
TC 251 Asset management
ISO 55001:2014 * Asset management — Management systems — Requirements
C
TC 254 Safety of amusement rides and amusement devices
ISO 17842-1:2015 * Safety of amusement rides and amusement devices — Part 1: Design and manufacture H
ISO 17842-3:2015 * Safety of amusement rides and amusement devices — Part 3: Requirements for inspection during design, manufacture, operation and use B
TC 256 Pigments, dyestuffs and extenders
ISO 18314-1:2015 * Analytical colorimetry — Part 1: Practical colour measurement A
ISO 18314-2:2015 * Analytical colorimetry — Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, hiding power C
ISO 18314-3:2015 * Analytical colorimetry — Part 3: Special indices A
TC 292 Security and resilience
ISO 22324:2015 * Societal security — Emergency management — Guidelines for colour-coded alerts
B
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 18218-1:2015 Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method B
ISO 18218-2:2015 Leather — Determination of ethoxylated alkylphenols — Part 2: Indirect method C
CASCO Committee on conformity assessment
ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements
F
ISO/IEC 17050-1:2004 * Conformity assessment — Supplier’s declaration of conformity — Part 1: General requirements
A
JTC 1 Information technology
ISO/IEC 29341-12-1:2015 * Information technology — UPnP Device Architecture — Part 12-1: Remote User Interface Device Control Protocol – Remote User Interface Client Device B
ISO/IEC 29341-12-2:2015 * Information technology — UPnP Device Architecture — Part 12-2: Remote User Interface Device Control Protocol — Remote User Interface Server Device B
ISO/IEC 29341-3-10:2015 * Information technology — UPnP Device Architecture — Part 3-10: Audio Video Device Control Protocol — Audio Video Transport Service G
ISO/IEC 29341-7-11:2015 * Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Switch Power Service B
ISO/IEC 29341-12-10:2015 * Information technology — UPnP Device Architecture — Part 12-10: Remote User Interface Device Control Protocol — Remote User Interface Client Service D
ISO/IEC 29341-12-11:2015 * Information technology — UPnP Device Architecture — Part 12-11: Remote User Interface Device Control Protocol – Remote User Interface Server Service C
ISO/IEC 29180:2012/Cor 1:2015 * Information technology — Telecommunications and information exchange between systems — Security framework for ubiquitous sensor networks — Technical Corrigendum 1 free
ISO/IEC 11693-3:2015 * Identification cards — Optical memory cards — Part 3: Authentication techniques B
ISO/IEC 11694-3:2015 * Identification cards — Optical memory cards — Linear recording method — Part 3: Optical properties and characteristics A
ISO/IEC 15693-3:2009/Amd 3:2015 * Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 3: Extended VICC memory organisation XZ
ISO/IEC TS 18822:2015 * Programming languages — C++ — File System Technical Specification G
ISO/IEC TS 19570:2015 * Programming Languages — Technical Specification for C++ Extensions for Parallelism D
ISO/IEC 30190:2013/Cor 1:2015 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk — Technical Corrigendum 1 free
ISO/IEC 30192:2013/Cor 1:2015 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk — Technical Corrigendum 1 free
ISO/IEC 30193:2013/Cor 1:2015 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk — Technical Corrigendum 1 free
ISO/IEC 14776-153:2015 * Information technology — Small Computer System Interface (SCSI) — Part 153: Serial Attached SCSI – 2.1 (SAS-2.1) H
ISO/IEC 17760-101:2015 * Information technology — AT Attachment 8 — Part 101: ATA/ATAPI Command Set (ATA8-ACS) H
ISO/IEC 24760-2:2015 * Information technology — Security techniques — A framework for identity management — Part 2: Reference architecture and requirements F
ISO/IEC 27041:2015 * Information technology — Security techniques — Guidance on assuring suitability and adequacy of incident investigative method C
ISO/IEC 27042:2015 * Information technology — Security techniques — Guidelines for the analysis and interpretation of digital evidence C
ISO/IEC 13818-1:2015 * Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems H
ISO/IEC 14496-12:2012/Cor 4:2015 * Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 4 free
ISO/IEC 15444-12:2012/Cor 4:2015 * Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 4 free
ISO/IEC 18477-1:2015 * Information technology — Scalable compression and coding of continuous-tone still images — Part 1: Scalable compression and coding of continuous-tone still images C
ISO/IEC 23002-5:2013/Amd 1:2015 * Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference software — Amendment 1: Graphics tool library (GTL) reference software and conformance XZ
ISO/IEC 23003-3:2012/Amd 1:2014/Cor 1:2015 * Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1: Conformance — Technical Corrigendum 1 free
ISO/IEC 23009-1:2014/Amd 1:2015 * Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 1: High Profile and Availability Time Synchronization XZ
ISO/IEC 29167-17:2015 * Information technology — Automatic identification and data capture techniques — Part 17: Crypto suite cryptoGPS security services for air interface communications F
ISO/IEC TR 15944-6:2015 * Information technology — Business Operational View — Part 6: Technical introduction to e-Business modelling F
ISO/IEC TR 19075-2:2015 * Information technology — Database languages — SQL Technical Reports — Part 2: SQL Support for Time-Related Information F
ISO/IEC TR 19075-3:2015 * Information technology — Database languages — SQL Technical Reports — Part 3: SQL Embedded in Programs using the JavaTM programming language D
ISO/IEC TR 19075-4:2015 * Information technology — Database languages — SQL Technical Reports — Part 4: SQL with Routines and types using the JavaTM programming language G
ISO/IEC 19763-1:2015 * Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework D
ISO/IEC 26300-1:2015 * Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 1: OpenDocument Schema H
ISO/IEC 26300-2:2015 * Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 2: Recalculated Formula (OpenFormula) Format H
ISO/IEC 26300-3:2015 * Information technology — Open Document Format for Office Applications (OpenDocument) v1.2 — Part 3: Packages E
ISO/IEC 29500-3:2015 * Information technology — Document description and processing languages — Office Open XML File Formats — Part 3: Markup Compatibility and Extensibility E
ISO/IEC 9995-11:2015 Information technology — Keyboard layouts for office systems — Part 11: Functionality of dead keys and repertoires of characters entered by dead keys B
Zobacz podobne  ISO.org – normy opublikowane w lipcu 2017 roku

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków