Zobacz nowe normy (grudzień 2014)! | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w grudniu 2014 | ISO.org – normy opublikowane w grudniu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w grudniu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w grudniu 2014

Nowe normy międzynarodowe opublikowane od 1 do 31 grudnia 2014

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

 

Standards published
New International Standards published between 01 December and 31 December 2014
* Available in English only
** French version of standard previously published in English only
Price group

COPOLCO

Committee on consumer policy

ISO/IEC Guide 50:2014 * Safety aspects — Guidelines for child safety in standards and other specifications F

PC 271

Compliance management systems

ISO 19600:2014 * Compliance management systems — Guidelines E

TC 8

Ships and marine technology

ISO/PAS 19697:2014 * Ships and marine technology — Navigation and ship operations — Electronic inclinometers D

TC 17

Steel

ISO 4996:2014 * Hot-rolled steel sheet of high yield stress structural quality B

TC 20

Aircraft and space vehicles

ISO 15845:2014 * Aircraft ground equipment – Boarding vehicle for persons with reduced mobility – Functional and safety requirements D

TC 21

Equipment for fire protection and fire fighting

ISO 7240-8:2014 * Fire detection and alarm systems — Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor G
ISO 6182-12:2014 * Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems C

TC 23

Tractors and machinery for agriculture and forestry

ISO 16119-4:2014 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers D
ISO 9635-5:2014 * Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves C
ISO 24631-5:2014 Radio frequency identification of animals — Part 5: Procedure for testing the capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders B

TC 27

Solid mineral fuels

ISO/TS 18806:2014 * Solid mineral fuels — Determination of Chlorine content B

TC 28

Petroleum products and related products of synthetic or biological origin

ISO 26422:2014 * Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing B

TC 29

Small tools

ISO 12164-3:2014 Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools B
ISO 12164-4:2014 Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools A
ISO 3919:2005/Amd 1:2014 Coated abrasives — Flap wheels with shaft — Amendment 1 XZ

TC 34

Food products

ISO 18301:2014 Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscillating U-tube method B
ISO 11136:2014 * Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in a controlled area F

TC 37

Terminology and other language and content resources

ISO 24617-7:2014 * Language resource management — Semantic annotation framework — Part 7: Spatial information (ISOspace) G

TC 39

Machine tools

ISO 10791-6:2014 Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations F

TC 45

Rubber and rubber products

ISO 1656:2014 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content D
ISO 2005:2014 * Rubber latex, natural, concentrate — Determination of sludge content A
ISO 2302:2014 Isobutene-isoprene rubber (IIR) — Evaluation procedure B
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure C
ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) — Evaluation procedure B
ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures B

TC 67

Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 12736:2014 Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures G
ISO 19901-3:2014 * Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure H

TC 70

Internal combustion engines

ISO 7967-11:2014 * Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11: Fuel systems D

TC 84

Devices for administration of medicinal products and catheters

ISO 11608-1:2014 Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems F

TC 92

Fire safety

ISO/TR 17755:2014 Fire safety — Overview of national fire statistics practices H
ISO 17554:2014 Reaction to fire tests — Mass loss measurement D
ISO 10294-1:1996/Amd 1:2014 * Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1 XZ
ISO 10294-4:2001/Amd 1:2014 * Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen XZ

TC 110

Industrial trucks

ISO 22915-22:2014 Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position B

TC 130

Graphic technology

ISO 15341:2014 * Graphic technology — Method for radius determination of printing cylinders C
ISO 16684-2:2014 * Graphic technology — Extensible metadata platform (XMP) — Part 2: Description of XMP schemas using RELAX NG F
ISO 16760:2014 * Graphic technology — Prepress data exchange — Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows F

TC 131

Fluid power systems

ISO 11500:2008 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle E

TC 145

Graphical symbols

ISO 7010:2011/Amd 6:2014 * Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6 XZ

TC 147

Water quality

ISO 5667-14:2014 * Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling E

TC 154

Processes, data elements and documents in commerce, industry and administration

ISO 9735-10:2014 * Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 2) — Part 10: Syntax service directories H

TC 171

Document management applications

ISO 12651-2:2014 * Electronic document management — Vocabulary — Part 2: Workflow management B
ISO 14289-1:2014 * Document management applications — Electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000-1 (PDF/UA-1) C
ISO 14739-1:2014 * Document management — 3D use of Product Representation Compact (PRC) format — Part 1: PRC 10001 H

TC 172

Optics and photonics

ISO 8039:2014 * Microscopes — Values, tolerances and symbols for magnification A

TC 173

Assistive products for persons with disability

ISO 16840-10:2014 Wheelchairs — Resistance to ignition of non-integrated seat and back support cushions — Part 10: Requirements and test methods C

TC 174

Jewellery

ISO 11426:2014 * Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay) B
ISO 15096:2014 * Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using ICP-OES A

TC 181

Safety of toys

ISO 8124-1:2014 * Safety of toys — Part 1: Safety aspects related to mechanical and physical properties H

TC 184

Automation systems and integration

ISO 10303-41:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 41: Integrated generic resource: Fundamentals of product description and support B
ISO 10303-42:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 42: Integrated generic resource: Geometric and topological representation B
ISO 10303-44:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 44: Integrated generic resource: Product structure configuration B
ISO 10303-45:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 45: Integrated generic resource: Material and other engineering properties B
ISO 10303-47:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 47: Integrated generic resource: Shape variation tolerances B
ISO 10303-50:2002/Cor 2:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 50: Integrated generic resource: Mathematical constructs — Technical Corrigendum 2 free
ISO 10303-52:2011/Cor 1:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 52: Integrated generic resource: Mesh-based topology — Technical Corrigendum 1 free
ISO 10303-59:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 59: Integrated generic resource — Quality of product shape data B
ISO 10303-101:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting B
ISO 10303-104:2000/Cor 2:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 104: Integrated application resource: Finite element analysis — Technical Corrigendum 2 free
ISO 10303-105:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics B
ISO 10303-108:2005/Cor 2:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models — Technical Corrigendum 2 free
ISO 10303-109:2004/Cor 2:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models — Technical Corrigendum 2 free
ISO 10303-111:2007/Cor 2:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes — Technical Corrigendum 2 free
ISO 10303-209:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 209: Application protocol: Multidisciplinary analysis and design H
ISO 10303-210:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 210: Application protocol: Electronic assembly, interconnect and packaging design H
ISO 10303-242:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering H
ISO/TS 10303-409:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 409: Application module: AP209 multidisciplinary analysis and design B
ISO/TS 10303-410:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly interconnect and packaging design B
ISO/TS 10303-442:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3D engineering B
ISO 10303-518:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 518: Application interpreted construct: Mechanical design shaded presentation B
ISO 10303-522:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 522: Application interpreted construct: Machining features B
ISO/TS 10303-1051:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance B
ISO/TS 10303-1127:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1127: Application module: File identification B
ISO/TS 10303-1142:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1142: Application module: Requirement view definition relationship B
ISO/TS 10303-1603:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1603: Application module: Analytical model B
ISO/TS 10303-1636:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1636: Application module: Assembly module design B
ISO/TS 10303-1642:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1642: Application module: Assembly module usage view B
ISO/TS 10303-1650:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1650: Application module: Bare die B
ISO/TS 10303-1686:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1686: Application module: Interconnect module usage view B
ISO/TS 10303-1698:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1698: Application module: Layered interconnect module design B
ISO/TS 10303-1706:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1706: Application module: Non feature shape element B
ISO/TS 10303-1707:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1707: Application module: Package B
ISO/TS 10303-1718:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1718: Application module: Layered interconnect simple template B
ISO/TS 10303-1803:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1803: Application module: Process plan B
ISO/TS 10303-3001:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 3001: Business object model: Managed model based 3d engineering B
ISO 13584-20:1998/Cor 1:2014 * Industrial automation systems and integration — Parts library — Part 20: Logical resource: Logical model of expressions — Technical Corrigendum 1 free

TC 188

Small craft

ISO 13297:2014 Small craft — Electrical systems — Alternating current installations E

TC 207

Environmental management

ISO/TS 14072:2014 Environmental management — Life cycle assessment — Requirements and guidelines for organizational life cycle assessment E

TC 212

Clinical laboratory testing and in vitro diagnostic test systems

ISO/TS 17822-1:2014 * In vitro diagnostic test systems — Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens — Part 1: General requirements, terms and definitions D

TC 213

Dimensional and geometrical product specifications and verification

ISO 2692:2014 Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) F

TC 215

Health informatics

ISO/TS 13131:2014 * Health informatics — Telehealth services — Quality planning guidelines E
ISO/TR 28380-3:2014 * Health informatics — IHE global standards adoption — Part 3: Deployment C
IEC/TR 80001-2-5:2014 * Application of risk management for IT-networks incorporating medical devices — Part 2-5: Application guidance — Guidance for distributed alarm systems E

TC 218

Timber

ISO 13061-1:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests A
ISO 13061-2:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests A
ISO 13061-3:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending A
ISO 13061-4:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending A
ISO 13061-6:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain A
ISO 13061-7:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain A
ISO 17959:2014 * General requirements for solid wood flooring C

TC 219

Floor coverings

ISO 24338:2014 * Laminate floor coverings — Determination of abrasion resistance D

TC 221

Geosynthetics

ISO 13427:2014 Geosynthetics — Abrasion damage simulation (sliding block test) B

TC 223

Societal security

ISO 22315:2014 * Societal security — Mass evacuation — Guidelines for planning D

TC 242

Energy Management

ISO 50003:2014 Energy management systems — Requirements for bodies providing audit and certification of energy management systems C
ISO 50004:2014 * Energy management systems — Guidance for the implementation, maintenance and improvement of an energy management system F
ISO 50006:2014 * Energy management systems — Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) — General principles and guidance E
ISO 50015:2014 Energy management systems — Measurement and verification of energy performance of organizations — General principles and guidance D

TMBG

Technical Management Board – groups

IWA 17:2014 * Information and operations security and integrity requirements for lottery and gaming organizations C

JTC 1

Information technology

ISO/IEC TR 29181-2:2014 * Information technology — Future Network — Problem statement and requirements — Part 2: Naming and addressing F
ISO/IEC TR 29181-5:2014 * Information technology — Future Network — Problem statement and requirements — Part 5: Security A
ISO/IEC 90003:2014 * Software engineering — Guidelines for the application of ISO 9001:2008 to computer software G
ISO/IEC 24775-5:2014 * Information technology — Storage management — Part 5: File systems H
ISO/IEC 24775-6:2014 * Information technology — Storage management — Part 6: Fabric H
ISO/IEC 24775-7:2014 * Information technology — Storage management — Part 7: Host Elements H
ISO/IEC 24775-8:2014 * Information technology — Storage management — Part 8: Media Libraries H
ISO/IEC 19763-10:2014 * Information technology — Metamodel framework for interoperability (MFI)       — Part 10: Core model and basic mapping E
ISO/IEC 24752-1:2014 * Information technology — User interfaces — Universal remote console — Part 1: General framework F
ISO/IEC 24752-2:2014 * Information technology — User interfaces — Universal remote console — Part 2: User interface socket description F
ISO/IEC 24752-4:2014 * Information technology — User interfaces — Universal remote console — Part 4: Target description D
ISO/IEC 24752-5:2014 * Information technology — User interfaces — Universal remote console — Part 5: Resource description E
ISO/IEC 24752-6:2014 * Information technology — User interfaces — Universal remote console — Part 6: Web service integration G

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków