Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w grudniu 2016 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w grudniu 2016 roku | ISO.org – normy opublikowane w grudniu 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w grudniu 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w grudniu 2016 roku

Nowe normy i standardy opublikowane w grudniu 2016 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grup cenowa
PC 252 Natural gas fuelling stations for vehicles
ISO 16923:2016 * Natural gas fuelling stations — CNG stations for fuelling vehicles F
ISO 16924:2016 * Natural gas fuelling stations — LNG stations for fuelling vehicles G
TC 6 Paper, board and pulps
ISO 12625-4:2016 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption B
ISO 12625-5:2016 Tissue paper and tissue products — Part 5: Determination of wet tensile strength C
ISO 12625-6:2016 Tissue paper and tissue products — Part 6: Determination of grammage B
TC 8 Ships and marine technology
ISO 19355:2016 * Ships and marine technology — Marine cranes — Structural requirements B
TC 17 Steel
ISO 18203:2016 Steel — Determination of the thickness of surface-hardened layers B
TC 20 Aircraft and space vehicles
ISO 7718-1:2016 * Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors A
ISO 7718-2:2016 * Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors A
TC 22 Road vehicles
ISO 11898-2:2016 * Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit E
ISO 17987-7:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification H
ISO 13296:2016 * Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions B
ISO 13948-2:2016 * Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections B
IEC 62752:2016 * In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) H
TC 24 Particle characterization including sieving
ISO 19430:2016 * Particle size analysis — Particle tracking analysis (PTA) method D
TC 27 Solid mineral fuels
ISO 1213-2:2016 * Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis A
TC 29 Small tools
ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing A
ISO 3318:2016 Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads A
TC 31 Tyres, rims and valves
ISO 5775-2:2015 Bicycle tyres and rims — Part 2: Rims C
TC 34 Food products
ISO 16649-3:2015 Microbiology of the food chain — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide B
ISO 5492:2008/Amd 1:2016 * Sensory analysis — Vocabulary — Amendment 1 A
ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences B
ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence B
ISO/TS 21569-6:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences B
TC 37 Terminology and other language and content resources
ISO 24617-8:2016 * Language resource management — Semantic annotation framework (SemAF) — Part 8: Semantic relations in discourse, core annotation schema (DR-core) F
ISO 2603:2016 Simultaneous interpreting — Permanent booths — Requirements B
ISO 4043:2016 Simultaneous interpreting — Mobile booths — Requirements B
ISO 20109:2016 Simultaneous interpreting — Equipment — Requirements C
TC 38 Textiles
ISO 16847:2016 Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing A
TC 39 Machine tools
ISO 3070-2:2016 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type) G
TC 44 Welding and allied processes
ISO 10675-1:2016 Non-destructive testing of welds —  Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys B
TC 45 Rubber and rubber products
ISO 8033:2016 Rubber and plastics hoses — Determination of adhesion between components C
ISO 13775-2:2016 * Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications D
TC 58 Gas cylinders
ISO 12209:2013/Amd 1:2016 Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar XZ
TC 59 Buildings and civil engineering works
ISO 29481-2:2012 Building information models — Information delivery manual — Part 2: Interaction framework G
TC 61 Plastics
ISO 16620-4:2016 Plastics — Biobased content — Part 4: Determination of biobased mass content C
ISO 177:2016 Plastics — Determination of migration of plasticizers A
TC 69 Applications of statistical methods
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL H
ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics H
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 22765:2016 * Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for ceramographic preparation for microstructure examination B
TC 89 Wood-based panels
ISO 27769:2016 * Wood-based panels — Wet process fibreboard C
TC 92 Fire safety
ISO/TS 5660-4:2016 * Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release E
TC 94 Personal safety — Protective clothing and equipment
ISO 17493:2016 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven B
TC 106 Dentistry
ISO/TS 20746:2016 * Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 20283-5:2016 Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships B
ISO 15261:2004/Amd 1:2016 * Vibration and shock generating systems — Vocabulary — Amendment 1 A
TC 113 Hydrometry
ISO/TR 19234:2016 * Hydrometry — Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360 C
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 15493:2003/Amd 1:2016 Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series — Amendment 1 XZ
ISO 10928:2016 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use F
TC 145 Graphical symbols
ISO 3864-2:2016 * Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels D
TC 147 Water quality
ISO 9308-1:2014/Amd 1:2016 * Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora — Amendment 1 XZ
TC 153 Valves
ISO 6553:2016 Automatic steam traps — Marking A
TC 176 Quality management and quality assurance
ISO/TS 9002:2016 Quality management systems — Guidelines for the application of ISO 9001:2015 F
TC 178 Lifts, escalators and moving walks
ISO/TR 8100-24:2016 * Safety requirements for lifts (elevators) — Part 24: Convergence of lift requirements H
TC 184 Automation systems and integration
IEC 62264-3:2016 * Enterprise-control system integration — Part 3: Activity models of manufacturing operations management B
TC 194 Biological and clinical evaluation of medical devices
ISO/TR 15499:2016 Biological evaluation of medical devices — Guidance on the conduct of biological evaluation within a risk management process C
TC 204 Intelligent transport systems
ISO/TS 21219-23:2016 * Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 23: Roads and multimodal routes (TPEG2-RMR) F
TC 206 Fine ceramics
ISO 14705:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature D
TC 210 Quality management and corresponding general aspects for medical devices
ISO 15223-1:2016 Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements D
ISO 80369-7:2016 Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications F
TC 213 Dimensional and geometrical product specifications and verification
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes D
ISO 16610-28:2016 Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects D
TC 215 Health informatics
ISO/TS 18062:2016 * Health informatics — Categorial structure for representation of herbal medicaments in terminological systems D
ISO/TS 19844:2016 * Health informatics — Identification of medicinal products — Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances H
TC 217 Cosmetics
ISO 18416:2015 Cosmetics — Microbiology — Detection of Candida albicans C
TC 219 Floor coverings
ISO 20251:2016 * Textile floor coverings — Water impermeability test A
ISO 20326:2016 * Resilient floor coverings — Specification for floor panels/assembly for loose laying C
TC 238 Solid biofuels
ISO/TS 17225-8:2016 Solid biofuels — Fuel specifications and classes — Part 8: Graded thermally treated and densified biomass fuels C
TC 260 Human resource management
ISO 30400:2016 Human resource management — Vocabulary A
TC 282 Water reuse
ISO 16075-4:2016 * Guidelines for treated wastewater use for irrigation projects — Part 4: Monitoring D
CASCO Committee on conformity assessment
ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements F
JTC 1 Information technology
ISO/IEC 19637:2016 * Information technology — Sensor network testing framework F
ISO/IEC 20802-1:2016 * Information technology — Open data protocol (OData) v4.0 — Part 1: Core H
ISO/IEC 20802-2:2016 * Information technology — Open data protocol (OData) v4.0 — Part 2: OData JSON Format F
ISO/IEC 26557:2016 * Software and systems engineering — Methods and tools for variability mechanisms in software and systems product line F
ISO/IEC 14443-3:2016/Amd 1:2016 * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 1: RFU handling rules XZ
ISO/IEC 14443-4:2016/Amd 1:2016 * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 1: RFU handling rules XZ
ISO/IEC 18367:2016 * Information technology — Security techniques — Cryptographic algorithms and security mechanisms conformance testing G
ISO/IEC 27004:2016 * Information technology — Security techniques — Information security management — Monitoring, measurement, analysis and evaluation G
ISO/IEC 14496-10:2014/Amd 3:2016 * Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional supplemental enhancement information XZ
ISO/IEC 14496-16:2011/Amd 3:2016 * Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 3: Printing material and 3D graphics coding for browsers XZ
ISO/IEC 21000-20:2016 * Information technology — Multimedia framework (MPEG-21) — Part 20: Contract Expression Language H
ISO/IEC 23003-1:2007/Amd 3:2016 * Information technology — MPEG audio technologies — Part 1: MPEG Surround — Amendment 3: MPEG Surround extension for 3D Audio XZ
ISO/IEC 23006-2:2016 * Information technology — Multimedia service platform technologies — Part 2: MPEG extensible middleware (MXM) API F
ISO/IEC 23006-3:2016 * Information technology — Multimedia service platform technologies — Part 3: Conformance and reference software E
ISO/IEC 15416:2016 * Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols F
ISO/IEC 15459-3:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 3: Common rules B
ISO/IEC 9075-1:2016 * Information technology — Database languages — SQL — Part 1: Framework (SQL/Framework) G
ISO/IEC 9075-2:2016 * Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) H
ISO/IEC 9075-3:2016 * Information technology — Database languages — SQL — Part 3: Call-Level Interface (SQL/CLI) H
ISO/IEC 9075-4:2016 * Information technology — Database languages — SQL — Part 4: Persistent stored modules (SQL/PSM) H
ISO/IEC 9075-9:2016 * Information technology — Database languages — SQL — Part 9: Management of External Data (SQL/MED) H
ISO/IEC 9075-10:2016 * Information technology — Database languages — SQL — Part 10: Object language bindings (SQL/OLB) H
ISO/IEC 9075-11:2016 * Information technology — Database languages — SQL — Part 11: Information and definition schemas (SQL/Schemata) H
ISO/IEC 9075-13:2016 * Information technology — Database languages — SQL — Part 13: SQL Routines and types using the Java TM programming language (SQL/JRT) H
ISO/IEC 9075-14:2016 * Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) H
ISO/IEC TR 19075-5:2016 * Information technology — Database languages — SQL Technical Reports — Part 5: Row Pattern Recognition in SQL G
ISO/IEC TS 19763-13:2016 * Information technology — Metamodel framework for interoperability (MFI)       — Part 13: Metamodel for form design registration F
ISO/IEC TR 30114-1:2016 * Information technology — Extensions of Office Open XML file formats — Part 1: Guidelines A
ISO/IEC 30122-1:2016 Information technology — User interfaces — Voice commands — Part 1: Framework and general guidance B
ISO/IEC 19788-2:2011/Amd 1:2016 * Information technology — Learning, education and training — Metadata for learning resources — Part 2: Dublin Core elements — Amendment 1: Non-literal content value data elements XZ
ISO/IEC TR 20748-1:2016 * Information technology for learning, education and training — Learning analytics interoperability — Part 1: Reference model E
ISO/IEC 19794-5:2011/Amd 2:2015/Cor 1:2016 * Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 2: XML encoding and clarification of defects — Technical Corrigendum 1 free

 

 

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków