IKMJ |ISO.org – normy opublikowane w grudniu 2018 roku | | IKMJ | IKMJ |ISO.org – normy opublikowane w grudniu 2018 roku | ISO.org – normy opublikowane w grudniu 2018 roku – IKMJ | ISO.org – normy opublikowane w grudniu 2018 roku – IKMJ |
Nowa norma ISO

ISO.org – normy opublikowane w grudniu 2018 roku

Nowe normy i standardy opublikowane w grudniu 2018 roku:
1 opóźniona publikacja wersji językowej
2 poprawiona wersja
3 wielojęzyczny dokument

 

 

            Grupa cenowa

 

TC 2 Fasteners
ISO 16228:2017 fr2 Fasteners — Types of inspection documents

D

TC 4 Rolling bearings
ISO 13012-1:2018 en

fr

Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3

D

ISO 13012-2:2018 en

fr

Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5

C

TC 6 Paper, board and pulps
ISO 21400:2018 en Pulp — Determination of cellulose nanocrystal sulfur and sulfate half-ester content

D

ISO 7263-1:2018 en

fr

Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 1: A-flute

B

ISO 7263-2:2018 en

fr

Corrugating medium — Determination of the flat crush resistance after laboratory fluting — Part 2: B-flute

B

TC 8 Ships and marine technology
ISO 5894:2018 en Ships and marine technology — Manholes with bolted covers

C

TC 17 Steel
ISO/TR 9769:2018 en Steel and iron — Review of available methods of analysis

H

ISO 5948:2018 en

fr

Railway rolling stock material — Ultrasonic acceptance testing

C

TC 20 Aircraft and space vehicles
ISO 9206:2018 en Aerospace — Fixed displacement hydraulic motors — General specifications

F

TC 21 Equipment for fire protection and fire fighting
ISO/TS 21805:2018 en Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems

E

TC 22 Road vehicles
ISO 26262-1:2018 en Road vehicles — Functional safety — Part 1: Vocabulary

A

ISO 26262-2:2018 en Road vehicles — Functional safety — Part 2: Management of functional safety

F

ISO 26262-3:2018 en Road vehicles — Functional safety — Part 3: Concept phase

E

ISO 26262-4:2018 en Road vehicles — Functional safety — Part 4: Product development at the system level

E

ISO 26262-5:2018 en Road vehicles — Functional safety — Part 5: Product development at the hardware level

H

ISO 26262-6:2018 en Road vehicles — Functional safety — Part 6: Product development at the software level

G

ISO 26262-7:2018 en Road vehicles — Functional safety — Part 7: Production, operation, service and decommissioning

C

ISO 26262-8:2018 en Road vehicles — Functional safety — Part 8: Supporting processes

G

ISO 26262-9:2018 en Road vehicles — Functional safety — Part 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses

E

ISO 26262-10:2018 en Road vehicles — Functional safety — Part 10: Guidelines on ISO 26262

G

ISO 26262-11:2018 en Road vehicles — Functional safety — Part 11: Guidelines on application of ISO 26262 to semiconductors

H

ISO 26262-12:2018 en Road vehicles — Functional safety — Part 12: Adaptation of ISO 26262 for motorcycles

F

ISO 3888-1:2018 en Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change

A

ISO 16232:2018 en Road vehicles — Cleanliness of components and systems

H

ISO/TS 21476:2018 en Road vehicles — Displacement calibration method of IR-TRACC devices

D

TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 4259-2:2017 fr1 Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to methods of test

D

ISO 17786:2015 fr1 Dimethyl ether (DME) for fuels — Determination of high temperature (105°C) evaporation residues — Mass analysis method

B

TC 34 Food products
ISO 15151:2018 fr1 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma atomic emission spectrometry (ICP-AES) method

D

ISO 21424:2018 fr1 Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma mass spectrometry (ICP-MS) method

E

TC 35 Paints and varnishes
ISO 11124-2:2018 en2

fr2

Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chilled-iron grit

A

TC 38 Textiles
ISO 18254-2:2018 en

fr

Textiles — Method for the detection and determination of alkylphenol ethoxylates (APEO) — Part 2: Method using NPLC

C

TC 44 Welding and allied processes
ISO 20601:2018 en

fr

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components

C

ISO 7289:2018 en Gas welding equipment — Quick-action couplings with shut-off valves for welding, cutting and allied processes

B

ISO 24394:2018 en Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components

F

TC 46 Information and documentation
ISO/TR 21946:2018 fr1 Information and documentation — Appraisal for managing records

C

TC 59 Buildings and civil engineering works
ISO 19650-1:2018 en Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 1: Concepts and principles

E

ISO 19650-2:2018 en Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 2: Delivery phase of the assets

D

TC 61 Plastics
ISO 9994:2018 en

fr

Lighters — Safety specifications

E

ISO 22702:2018 en

fr

Utility lighters — Safety specifications

D

ISO 294-2:2018 en

fr

Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars

A

ISO 294-4:2018 en

fr

Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage

B

ISO 2818:2018 en

fr

Plastics — Preparation of test specimens by machining

C

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 18796-1:2018 fr1 Petroleum, petrochemicals and natural gas industries — Internal coating and lining of carbon steel process vessels — Part 1: Technical requirements

D

TC 69 Applications of statistical methods
ISO/TS 28038:2018 en Determination and use of polynomial calibration functions

G

TC 81 Common names for pesticides and other agrochemicals
ISO 257:2018 en Pesticides and other agrochemicals — Principles for the selection of common names

C

TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 19581:2017 fr1 Measurement of radioactivity — Gamma emitting radionuclides — Rapid screening method using scintillation detector gamma-ray spectrometry

C

TC 91 Surface active agents
ISO 4323:2018 en Soaps — Determination of chloride content — Potentiometric method

A

TC 94 Personal safety — Personal protective equipment
ISO 23388:2018 en

fr

Protective gloves against mechanical risks

E

ISO 18639-5:2018 en PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

D

TC 110 Industrial trucks
ISO 22915-4:2018 fr1 Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height

B

TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-56:2017/Amd 1:2018 en

fr

Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement — Amendment 1

XZ

IEC 80601-2-71:2015 en

fr3

Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment

BD

TC 127 Earth-moving machinery
ISO 7132:2003/Amd 1:2018 en

fr

Earth-moving machinery — Dumpers — Terminology and commercial specifications — Amendment 1

XZ

TC 130 Graphic technology
ISO 19302:2018 en Graphic technology — Colour conformity of printing workflows

C

ISO 21632:2018 en Graphic technology — Determination of the energy consumption of digital printing devices including transitional and related modes

F

TC 131 Fluid power systems
ISO 6150:2018 en

fr

Pneumatic fluid power — Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa, and 2,5 MPa (10 bar, 16 bar and 25 bar) — Plug connecting dimensions, specifications, application guidelines and testing

C

ISO 6301-2:2018 en Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier’s literature

A

ISO 3601-3:2005/Amd 1:2018 en

fr

Fluid power systems — O-rings — Part 3: Quality acceptance criteria — Amendment 1

XZ

TC 134 Fertilizers, soil conditioners and beneficial substances
ISO 20977:2018 en

fr

Liming materials — Determination of size distribution by dry and wet sieving

C

ISO 22146:2018 en

fr

Carbonate liming materials — Determination of reactivity — Automatic titration method with citric acid

C

TC 145 Graphical symbols
ISO 7010:2011/Amd 9:2018 en Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 9

XZ

TC 147 Water quality
ISO 11348-1:2007/Amd 1:2018 en

fr

Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 1: Method using freshly prepared bacteria — Amendment 1

XZ

ISO 11348-2:2007/Amd 1:2018 en

fr

Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 2: Method using liquid-dried bacteria — Amendment 1

XZ

ISO 11348-3:2007/Amd 1:2018 en

fr

Water quality — Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) — Part 3: Method using freeze-dried bacteria — Amendment 1

XZ

TC 150 Implants for surgery
ISO 13779-2:2018 en

fr

Implants for surgery — Hydroxyapatite — Part 2: Thermally sprayed coatings of hydroxyapatite

B

ISO 13779-3:2018 en

fr

Implants for surgery — Hydroxyapatite — Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity

E

ISO 13779-4:2018 en

fr

Implants for surgery — Hydroxyapatite — Part 4: Determination of coating adhesion strength

A

ISO 18192-1:2011/Amd 1:2018 en Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test — Amendment 1

XZ

TC 155 Nickel and nickel alloys
ISO 23166:2018 en

fr

Nickel alloys — Determination of tantalum — Inductively coupled plasma optical emission spectrometric method

B

TC 159 Ergonomics
ISO 9241-306:2018 fr2 Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays

G

TC 171 Document management applications
ISO/TR 22957:2018 en Document management — Analysis, selection and implementation of enterprise content management (ECM) systems

G

TC 172 Optics and photonics
ISO 10110-18:2018 en

fr

Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae

D

ISO 9211-8:2018 en

fr

Optics and photonics — Optical coatings — Part 8: Minimum requirements for coatings used for laser optics

B

TC 173 Assistive products
ISO 7176-30:2018 en Wheelchairs — Part 30: Wheelchairs for changing occupant posture — Test methods and requirements

D

TC 184 Automation systems and integration
ISO 10303-41:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 41: Integrated generic resource: Fundamentals of product description and support

B

ISO 10303-42:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 42: Integrated generic resource: Geometric and topological representation

B

ISO 10303-43:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 43: Integrated generic resource: Representation structures

B

ISO 10303-44:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 44: Integrated generic resource: Product structure configuration

B

ISO 10303-45:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 45: Integrated generic resource: Material and other engineering properties

B

ISO 10303-46:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 46: Integrated generic resource: Visual presentation

B

ISO 10303-47:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 47: Integrated generic resource: Shape variation tolerances

B

ISO 10303-101:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 101: Integrated application resource: Draughting

B

ISO/TS 10303-409:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 409: Application module: AP209 multidisciplinary analysis and design

B

ISO/TS 10303-410:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly interconnect and packaging design

B

ISO/TS 10303-442:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3D engineering

B

ISO 10303-506:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 506: Application interpreted construct: Draughting elements

B

ISO 10303-520:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 520: Application interpreted construct: Associative draughting elements

B

ISO/TS 10303-1001:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment

B

ISO/TS 10303-1004:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape

B

ISO/TS 10303-1005:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology

B

ISO/TS 10303-1012:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval

B

ISO/TS 10303-1019:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition

B

ISO/TS 10303-1023:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1023: Application module: Part view definition

B

ISO/TS 10303-1026:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure

B

ISO/TS 10303-1027:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape positioning

B

ISO/TS 10303-1032:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment

B

ISO/TS 10303-1041:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1041: Application module: Product view definition relationship

B

ISO/TS 10303-1042:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1042: Application module: Work request

B

ISO/TS 10303-1050:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance

B

ISO/TS 10303-1051:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance

B

ISO/TS 10303-1054:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1054: Application module: Value with unit

B

ISO/TS 10303-1055:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1055: Application module: Part definition relationship

B

ISO/TS 10303-1063:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1063: Application module: Product occurrence

B

ISO/TS 10303-1064:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1064: Application module: Event

B

ISO/TS 10303-1103:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1103: Application module: Product class

B

ISO/TS 10303-1108:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1108: Application module: Specification based configuration

B

ISO/TS 10303-1110:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1110: Application module: Surface conditions

B

ISO/TS 10303-1111:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1111: Application module: Classification with attributes

B

ISO/TS 10303-1118:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1118: Application module: Measure representation

B

ISO/TS 10303-1122:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1122: Application module: Document assignment

B

ISO/TS 10303-1129:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1129: Application module: External properties

B

ISO/TS 10303-1130:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1130: Application module: Derived shape element

B

ISO/TS 10303-1131:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1131: Application module: Construction geometry

B

ISO/TS 10303-1147:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1147: Application module: Manufacturing configuration effectivity

B

ISO/TS 10303-1231:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1231: Application module: Product data management

B

ISO/TS 10303-1232:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1232: Application module: Design materials aspects

B

ISO/TS 10303-1248:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1248: Application module: Product breakdown

B

ISO/TS 10303-1250:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1250: Application module: Attachment slot

B

ISO/TS 10303-1253:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1253: Application module: Condition

B

ISO/TS 10303-1309:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1309: Application module: Drawing definition

B

ISO/TS 10303-1310:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1310: Application module: Draughting element

B

ISO/TS 10303-1311:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1311: Application module: Associative draughting elements

B

ISO/TS 10303-1312:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1312: Application module: Draughting element specialisations

B

ISO/TS 10303-1315:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1315: Application module: Mechanical design presentation representation with draughting

B

ISO/TS 10303-1316:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1316: Application module: Camera view 3D

B

ISO/TS 10303-1318:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1318: Application module: Procedural solid model

B

ISO/TS 10303-1319:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1319: Application module: Solid with local modification

B

ISO/TS 10303-1323:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1323: Application module: Basic geometric topology

B

ISO/TS 10303-1343:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1343: Application module: Product placement

B

ISO/TS 10303-1346:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1346: Application module: Numeric function

B

ISO/TS 10303-1349:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1349: Application module: Incomplete data reference mechanism

B

ISO/TS 10303-1350:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1350: Application module: Inertia characteristics

B

ISO/TS 10303-1362:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1362: Application module: Dimension and tolerance callouts

B

ISO/TS 10303-1380:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1380: Application module: FEA definition relationships

B

ISO/TS 10303-1399:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1399: Application module: Property as definition

B

ISO/TS 10303-1404:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1404: Application module: Geometric model 2D 3D relationship

B

ISO/TS 10303-1473:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1473: Application module: Description assignment

B

ISO/TS 10303-1475:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1475: Application module: Analysis characterized

B

ISO/TS 10303-1488:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1488: Application module: Verification and validation

B

ISO/TS 10303-1507:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1507: Application module: Geometrically bounded surface

B

ISO/TS 10303-1509:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1509: Application module: Manifold surface

B

ISO/TS 10303-1514:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1514: Application module: Advanced boundary representation

B

ISO/TS 10303-1520:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1520: Application module: Product data quality definition

B

ISO/TS 10303-1521:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1521: Application module: Poduct data quality criteria

B

ISO/TS 10303-1522:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1522: Application module: Product data quality inspection result

B

ISO/TS 10303-1523:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1523: Application module: Shape data quality criteria

B

ISO/TS 10303-1524:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1524: Shape data quality inspection result

B

ISO/TS 10303-1525:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1525: Application module: Composite surface

B

ISO/TS 10303-1526:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1526: Application module: Numeric expression

B

ISO/TS 10303-1527:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1527: Application module: Elementary function

B

ISO/TS 10303-1601:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1601: Application module: Altered package

B

ISO/TS 10303-1628:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1628: Application module: Design product data management

B

ISO/TS 10303-1634:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1634: Application module: Assembly component placement requirements

B

ISO/TS 10303-1635:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1635: Application module: Assembly functional interface requirement

B

ISO/TS 10303-1636:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1636: Application module: Assembly module design

B

ISO/TS 10303-1640:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1640: Application module: Assembly module with macro component

B

ISO/TS 10303-1641:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1641: Application module: Assembly module with subassembly

B

ISO/TS 10303-1642:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1642: Application module: Assembly module usage view

B

ISO/TS 10303-1643:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1643: Application module: Assembly module with interconnect component

B

ISO/TS 10303-1644:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1644: Application module: Assembly module with cable component

B

ISO/TS 10303-1645:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1645: Application module: Assembly module with macro component

B

ISO/TS 10303-1646:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1646: Application module: Footprint definition

B

ISO/TS 10303-1648:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1648: Application module: Assembly physical requirement allocation

B

ISO/TS 10303-1649:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1649: Application module: Assembly technology

B

ISO/TS 10303-1650:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1650: Application module: Bare die

B

ISO/TS 10303-1652:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1652: Application module: Basic geometry

B

ISO/TS 10303-1653:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1653: Application module: Cable

B

ISO/TS 10303-1654:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1654: Application module: Characteristic

B

ISO/TS 10303-1656:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1656: Application module: Component grouping

B

ISO/TS 10303-1657:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1657: Application module: Component feature

B

ISO/TS 10303-1660:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1660: Application module: Datum difference based model

B

ISO/TS 10303-1662:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1662: Application module: Design specific assignment to assembly usage view

B

ISO/TS 10303-1668:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1668: Application module: Fabrication joint

B

ISO/TS 10303-1670:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1670: Application module: Fabrication technology

B

ISO/TS 10303-1671:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1671: Application module: Feature and connection zone

B

ISO/TS 10303-1674:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1674: Application module: Functional assignment to part

B

ISO/TS 10303-1676:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1676: Application module: Functional decomposition to design

B

ISO/TS 10303-1679:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1679: Application module: Functional specification

B

ISO/TS 10303-1681:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1681: Application module: Generic material aspects

B

ISO/TS 10303-1682:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1682: Application module: Interconnect 2D shape

B

ISO/TS 10303-1685:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1685: Application module: Interconnect module to assembly module relationship

B

ISO/TS 10303-1686:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1686: Application module: Interconnect module usage view

B

ISO/TS 10303-1687:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1687: Application module: Interconnect module with macros

B

ISO/TS 10303-1689:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1689: Application module: Interconnect physical requirement allocation

B

ISO/TS 10303-1690:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1690: Application module: Interconnect placement requirements

B

ISO/TS 10303-1691:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1691: Application module: Interface component

B

ISO/TS 10303-1692:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1692: Application module: Land

B

ISO/TS 10303-1696:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1696: Application module: Layered interconnect module 3D design

B

ISO/TS 10303-1698:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1698: Application module: Layered interconnect module design

B

ISO/TS 10303-1700:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1700: Application module: Layered interconnect module with printed component design

B

ISO/TS 10303-1701:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1701: Application module: Layout macro definition

B

ISO/TS 10303-1702:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1702: Application module: Manifold subsurface

B

ISO/TS 10303-1703:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1703: Application module: Model parameter

B

ISO/TS 10303-1704:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1704: Application module: Network functional design view

B

ISO/TS 10303-1705:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1705: Application module: Functional usage view

B

ISO/TS 10303-1706:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1706: Application module: Non feature shape element

B

ISO/TS 10303-1707:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1707: Application module: Package

B

ISO/TS 10303-1708:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1708: Application module: Packaged connector model

B

ISO/TS 10303-1710:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1710: Application module: Packaged part black box model

B

ISO/TS 10303-1711:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1711: Application module: Part external reference

B

ISO/TS 10303-1712:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1712: Application module: Part feature function

B

ISO/TS 10303-1714:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1714: Application module: Part feature location

B

ISO/TS 10303-1716:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1716: Application module: Layered interconnect complex template

B

ISO/TS 10303-1717:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1717: Application module: Part template 3D shape

B

ISO/TS 10303-1718:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1718: Application module: Layered interconnect simple template

B

ISO/TS 10303-1721:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1721: Application module: Physical component feature

B

ISO/TS 10303-1722:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1722: Application module: Physical layout template

B

ISO/TS 10303-1723:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1723: Application module: Physical node requirement to implementing component allocation

B

ISO/TS 10303-1724:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1724: Application module: Physical unit 2D design view

B

ISO/TS 10303-1725:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1725: Application module: Physical unit 3D design view

B

ISO/TS 10303-1726:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1726: Application module: Physical unit 2D shape

B

ISO/TS 10303-1727:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1727: Application module: Physical unit 3D shape

B

ISO/TS 10303-1728:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1728: Application module: Physical unit design view

B

ISO/TS 10303-1729:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1729: Application module: Physical unit interconnect definition

B

ISO/TS 10303-1731:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1731: Application module: Constructive solid geometry 2D

B

ISO/TS 10303-1732:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1732: Application module: Physical unit usage view

B

ISO/TS 10303-1733:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1733: Application module: Planned characteristic

B

ISO/TS 10303-1735:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1735: Application module: Pre defined datum 2D symbol

B

ISO/TS 10303-1736:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1736: Application module: Pre defined datum 3D symbol

B

ISO/TS 10303-1737:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1737: Application module: Printed physical layout template

B

ISO/TS 10303-1740:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1740: Application module: Requirement decomposition

B

ISO/TS 10303-1741:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1741: Application module: Sequential laminate assembly design

B

ISO/TS 10303-1744:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1744: Application module: Discrete shield

B

ISO/TS 10303-1747:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1747: Application module: Specification document

B

ISO/TS 10303-1750:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1750: Application module: Text representation

B

ISO/TS 10303-1751:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1751: Application module: Test requirement allocation

B

ISO/TS 10303-1752:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1752: Application module: Thermal network definition

B

ISO/TS 10303-1753:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1753: Application module: Value with unit extension

B

ISO/TS 10303-1755:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1755: Application module: Physical connectivity definition

B

ISO/TS 10303-1764:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1764: Application module: Shape feature

B

ISO/TS 10303-1765:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1765: Application module: Characterizable object

B

ISO/TS 10303-1767:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1767: Application module: Composite constituent shape

B

ISO/TS 10303-1770:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1770: Application module: Part and zone laminate tables

B

ISO/TS 10303-1772:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1772: Application module: Ply orientation specification

B

ISO/TS 10303-1780:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1780: Application module: External unit

B

ISO/TS 10303-1788:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1788: Application module: Explicit constraints

B

ISO/TS 10303-1789:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1789: Application module: Geometric constraints

B

ISO/TS 10303-1790:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1790: Application module: Parameterization and variational representation

B

ISO/TS 10303-1791:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1791: Application module: Primitive solids

B

ISO/TS 10303-1792:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1792: Application module: Sketch

B

ISO/TS 10303-1795:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1795: Application module: Assembly feature relationship

B

ISO/TS 10303-1796:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1796: Application module: Kinematic motion representation

B

ISO/TS 10303-1797:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1797: Application module: Kinematic structure

B

ISO/TS 10303-1798:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1798: Application module: Kinematic state

B

ISO/TS 10303-1802:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1802: Application module: Assembly component

B

ISO/TS 10303-1803:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1803: Application module: Process plan

B

ISO/TS 10303-1804:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1804: Application module: Product as individual assembly and test

B

ISO/TS 10303-1806:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1806: Application module: Form feature in panel

B

ISO/TS 10303-1807:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1807: Application module: Part shape

B

ISO/TS 10303-1808:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1808: Application module: Assembly shape

B

ISO/TS 10303-1809:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1809: Application module: Default setting association

B

ISO/TS 10303-1811:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1811: Application module: Product and manufacturing information with nominal 3D models

B

ISO/TS 10303-1812:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1812: Application module: Product and manufacturing annotation presentation

B

ISO/TS 10303-1813:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1813: Application module: Parametric representation

B

ISO/TS 10303-1814:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1814: Application module: Machining features

B

ISO/TS 10303-1815:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1815: Application module: Mating strucuture

B

ISO/TS 10303-1816:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1816: Application module: Model based 3D geomatrical dimensioning and tolerancing representation

B

ISO 10303-1819:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1819: Application module: Tessellated geometry

B

ISO/TS 10303-1820:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1820: Application module: Point direction model

B

ISO/TS 10303-1823:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1823: Application module: Product view definition reference

B

ISO/TS 10303-1824:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1824: Application module: Change management

B

ISO/TS 10303-1826:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1826: Application module: Physical connectivity layout topology requirement

B

ISO/TS 10303-1827:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1827: Application module: Extruded structure cross section

B

ISO/TS 10303-1828:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1828: Application module: Wiring harness assembly design

B

ISO/TS 10303-1829:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1829: Application module: Assembly module with packaged component

B

ISO/TS 10303-1830:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1830: Application module: Edge based topological representation with length

B

ISO/TS 10303-1831:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1831: Application module: Scan data 3D shape

B

ISO/TS 10303-1834:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1834: Application module: Surface visual texture

B

ISO/TS 10303-1835:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1835: Application module: Additive manufacturing part and build information

B

ISO/TS 10303-1836:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1836: Application module: Vertex colours for tessellated geometry

B

ISO/TS 10303-1844:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1844: Application module: General design connectivity

B

ISO/TS 10303-1845:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1845: Application module: Wire and cable design connectivity

B

ISO/TS 10303-1846:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 1846: Application module: Mechanical design features and requirements

B

ISO/TS 10303-3001:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 3001: Business object model: Managed model based 3d engineering

B

ISO/TS 10303-4442:2018 en Industrial automation systems and integration — Product data representation and exchange — Part 4442: Domain model: Managed model based 3D engineering domain

B

TC 199 Safety of machinery
ISO/TR 22100-4:2018 en Safety of machinery — Relationship with ISO 12100 — Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects

C

TC 204 Intelligent transport systems
ISO/TR 21190:2018 en Electronic fee collection — Investigation of charging policies and technologies for future standardization

G

TC 207 Environmental management
ISO 14064-1:2018 en

fr

Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

F

TC 210 Quality management and corresponding general aspects for medical devices
ISO 18250-1:2018 en Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 1: General requirements and common test methods

G

ISO 18250-7:2018 en Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 7: Connectors for intravascular infusion

E

TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15195:2018 en

fr

Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures

B

ISO 20166-3:2018 en

fr

Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue — Part 3: Isolated DNA

C

TC 213 Dimensional and geometrical product specifications and verification
ISO 14405-2:2018 en

fr

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes

D

TC 215 Health informatics
ISO/IEEE 11073-10427:2018 fr1 Health informatics — Personal health device communication — Part 10427: Device specialization — Power status monitor of personal health devices

G

TC 219 Floor coverings
ISO 4918:2016/Amd 1:2018 en Resilient, textile and laminate floor coverings — Castor chair test — Amendment 1: Surface hardness

XZ

TC 221 Geosynthetics
ISO 12957-1:2018 en

fr

Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test

B

TC 228 Tourism and related services
ISO 21401:2018 en Tourism and related services — Sustainability management system for accommodation establishments — Requirements

E

TC 229 Nanotechnologies
ISO/TR 12885:2018 en Nanotechnologies — Health and safety practices in occupational settings

H

ISO/TS 16195:2018 en

fr

Nanotechnologies — Specification for developing representative test materials consisting of nano-objects in dry powder form

B

ISO/TR 20489:2018 en Nanotechnologies — Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples

B

TC 232 Learning services outside formal education
ISO 29992:2018 en

fr

Assessment of outcomes of learning services — Guidance

C

TC 249 Traditional Chinese medicine
ISO 21315:2018 en Traditional Chinese medicine — Ganoderma lucidum fruiting body

C

TC 258 Project, programme and portfolio management
ISO/TR 21506:2018 en Project, programme and portfolio management — Vocabulary

A

TC 260 Human resource management
ISO 30414:2018 en

fr

Human resource management — Guidelines for internal and external human capital reporting

E

TC 269 Railway applications
ISO/TR 21245:2018 en Railway applications — Railway project planning process — Guidance on railway project planning

E

TC 276 Biotechnology
ISO/TS 20399-1:2018 en Biotechnology — Ancillary materials present during the production of cellular therapeutic products — Part 1: General requirements

B

ISO/TS 20399-2:2018 en Biotechnology — Ancillary materials present during the production of cellular therapeutic products — Part 2: Best practice guidance for ancillary material suppliers

B

ISO/TS 20399-3:2018 en Biotechnology — Ancillary materials present during the production of cellular therapeutic products — Part 3: Best practice guidance for ancillary material users

B

TC 282 Water reuse
ISO 20670:2018 en

fr

Water reuse — Vocabulary

A

IULTCS International Union of Leather Technologists and Chemists Societies
ISO 5398-4:2018 en

fr

Leather — Chemical determination of chromic oxide content — Part 4: Quantification by inductively coupled plasma (ICP)

A

ISO 17226-1:2018 en

fr

Leather — Chemical determination of formaldehyde content — Part 1: Method using high performance liquid chromatography

B

ISO 17226-2:2018 en

fr

Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis

B

CASCO Committee on conformity assessment
ISO/IEC TS 17021-11:2018 fr1 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 11: Competence requirements for auditing and certification of facility management (FM) management systems

A

JTC 1 Information technology
ISO/IEC/IEEE 24748-2:2018 en Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)

G

ISO/IEC/IEEE 26511:2018 en Systems and software engineering — Requirements for managers of information for users of systems, software, and services

G

ISO/IEC/IEEE 26515:2018 en Systems and software engineering — Developing information for users in an agile environment

D

ISO/IEC 23270:2018 en Information technology — Programming languages — C#

H

ISO/IEC 23001-12:2018 en Information technology — MPEG systems technologies — Part 12: Sample variants

E

ISO/IEC 23003-2:2018 en Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC)

H

ISO/IEC 19086-2:2018 en Cloud computing — Service level agreement (SLA) framework — Part 2: Metric model

F

ISO/IEC TR 23186:2018 en Information technology — Cloud computing — Framework of trust for processing of multi-sourced data

C

ISO/IEC 20924:2018 en Information technology — Internet of Things (IoT) — Vocabulary

B

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości


Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków