Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lipcu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lipcu 2015 | ISO.org – normy opublikowane w lipcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w lipcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w lipcu 2015

Nowe normy i standardy opublikowane w lipcu 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grupa cenowa
TC 6 Paper, board and pulps
ISO 302:2015 * Pulps — Determination of Kappa number B
TC 20 Aircraft and space vehicles
ISO 16130:2015 * Aerospace series — Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) B
ISO 19632:2015 * Aerospace series — Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series — Design standard B
ISO 22645:2005/Amd 1:2015 * Space data and information transfer systems — TM (telemetry) space data link protocol — Amendment 1 XZ
ISO 22646:2005/Amd 1:2015 * Space data and information transfer systems — Space packet protocol — Amendment 1 XZ
ISO 22664:2013/Amd 1:2015 * Space data and information transfer systems — TC (telecommand) space data link protocol — Amendment 1 XZ
ISO 16164:2015 * Space systems — Disposal of satellites operating in or crossing Low Earth Orbit B
TC 22 Road vehicles
ISO 15031-5:2015 * Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services H
ISO 15031-6:2015 * Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions C
ISO 10924-4:2015 * Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15 C
ISO 6519:2015 * Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs A
ISO 6487:2015 Road vehicles — Measurement techniques in impact tests — Instrumentation C
ISO/TR 12349-1:2015 * Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies A
TC 23 Tractors and machinery for agriculture and forestry
ISO 17962:2015 Agricultural machinery — Equipment for sowing — Minimization of the environmental effects of fan exhaust from pneumatic systems B
ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format B
ISO 15639-1:2015 * Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs) B
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 6743-4:2015 Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems) A
TC 38 Textiles
ISO 18596:2015 * Test method for staple length of dehaired cashmere — Hand-arranging method B
TC 39 Machine tools
ISO 230-7:2015 * Test code for machine tools — Part 7: Geometric accuracy of axes of rotation G
TC 44 Welding and allied processes
ISO 17533:2015 * Welding for aerospace applications — Welding information in design documents A
ISO 17634:2015 Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification D
TC 45 Rubber and rubber products
ISO 1125:2015 Rubber compounding ingredients — Carbon black — Determination of ash A
ISO 1658:2015 Natural rubber (NR) — Evaluation procedure C
ISO 21561-1:2015 * Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 1: 1H-NMR and IR with cast-film method C
TC 63 Glass containers
ISO 12822:2015 * Glass packaging — 26 H 126 crown finish — Dimensions A
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 16961:2015 * Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks F
ISO 13702:2015 * Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines G
ISO 24817:2015 * Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection H
TC 68 Financial services
ISO 10962:2015 * Securities and related financial instruments — Classification of financial instruments (CFI code) G
TC 69 Applications of statistical methods
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison H
TC 70 Internal combustion engines
ISO 8178-7:2015 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 3826-4:2015 Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features E
TC 83 Sports and other recreational facilities and equipment
ISO 8783:2015 Alpine skis — Guidelines for conducting slope performance tests A
ISO 9523:2015 Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods D
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM 51026:2015 * Practice for using the Fricke dosimetry system B
ISO/ASTM 52303:2015 * Guide for absorbed-dose mapping in radiation processing facilities B
ISO/TS 18090-1:2015 * Radiological protection — Characteristics of reference pulsed radiation — Part 1: Photon radiation C
ISO 21613:2015 (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine B
TC 87 Cork
ISO 2385:2015 * Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Sampling to determine moisture content A
ISO 2386:2015 * Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Determination of moisture content A
TC 92 Fire safety
ISO 16730-1:2015 * Fire safety engineering — Procedures and requirements for verification and validation of calculation methods — Part 1: General F
TC 94 Personal safety — Protective clothing and equipment
ISO 11611:2015 Protective clothing for use in welding and allied processes C
ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements D
ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing C
TC 96 Cranes
ISO 10245-2:2014/Amd 1:2015 * Cranes — Limiting and indicating devices — Part 2: Mobile cranes — Amendment 1 XZ
ISO 17096:2015 * Cranes — Safety — Load lifting attachments F
TC 102 Iron ore and direct reduced iron
ISO 4689-2:2015 * Iron ores — Determination of sulfur content — Part 2: Combustion/titration method C
ISO 4689-3:2015 * Iron ores — Determination of sulfur content — Part 3: Combustion/infrared method C
ISO 10204:2015 * Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method C
ISO 11536:2015 * Iron ores — Determination of loss on ignition — Gravimetric method B
ISO 15634:2015 * Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method C
TC 106 Dentistry
ISO 4823:2015 Dentistry — Elastomeric impression materials F
TC 108 Mechanical vibration, shock and condition monitoring
ISO 5349-2:2001/Amd 1:2015 Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1 XZ
TC 110 Industrial trucks
ISO 11525-5:2015 * Rough-terrain trucks — User requirements — Part 5: Interface between rough-terrain truck and integrated personnel work platform A
TC 121 Anaesthetic and respiratory equipment
ISO 17510:2015 Medical devices — Sleep apnoea breathing therapy — Masks and application accessories E
ISO 23747:2015 Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans D
TC 131 Fluid power systems
ISO 10771-1:2015 * Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method C
TC 134 Fertilizers and soil conditioners
ISO 8157:2015 * Fertilizers and soil conditioners — Vocabulary A
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 15874-5:2013 * Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system B
ISO 10931:2005/Amd 1:2015 Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system — Amendment 1 XZ
TC 156 Corrosion of metals and alloys
ISO 17918:2015 Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement D
TC 164 Mechanical testing of metals
ISO 14577-1:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method F
ISO 14577-2:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines D
ISO 14577-3:2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks B
TC 171 Document management applications
ISO/TR 18159:2015 * Document management — Environmental and work place safety regulations affecting microfilm processors F
TC 172 Optics and photonics
ISO 10110-5:2015 Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances D
ISO 10110-6:2015 Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances D
ISO 10110-19:2015 Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components B
ISO 14999-4:2015 Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 E
ISO 8624:2011/Amd 1:2015 Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1 XZ
TC 173 Assistive products for persons with disability
ISO/TR 16840-9:2015 * Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for seating C
TC 182 Geotechnics
ISO 17628:2015 Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger E
TC 184 Automation systems and integration
ISO 18435-3:2015 * Industrial automation systems and integration — Diagnostics, capability assessment and maintenance applications integration — Part 3: Applications integration description method F
TC 195 Building construction machinery and equipment
ISO 17740-1:2015 * Building construction machinery and equipment — Concrete placing systems for stationary equipment — Part 1: Terminology and commercial specifications B
TC 201 Surface chemical analysis
ISO/TS 18507:2015 * Surface chemical analysis — Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis E
ISO 17109:2015 * Surface chemical analysis — Depth profiling — Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films C
TC 204 Intelligent transport systems
ISO 11067:2015 * Intelligent transport systems — Curve speed warning systems (CSWS) — Performance requirements and test procedures E
ISO 14906:2011/Amd 1:2015 Electronic fee collection — Application interface definition for dedicated short-range communication — Amendment 1 D
ISO 21214:2015 * Intelligent transport systems — Communications access for land mobiles (CALM) — Infra-red systems H
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TS 17518:2015 Medical laboratories — Reagents for staining biological material — Guidance for users C
TC 215 Health informatics
ISO/HL7 10781:2015 * Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) G
ISO/TS 22077-3:2015 * Health informatics — Medical waveform format — Part 3: Long term electrocardiography E
TC 218 Timber
ISO 738:2015 * Coniferous sawn timber — Sizes — Permissible deviations and shrinkage A
TC 227 Springs
ISO 18137:2015 * Leaf springs — Technical specifications C
TC 234 Fisheries and aquaculture
ISO 16488:2015 * Marine finfish farms — Open net cage — Design and operation D
ISO 16541:2015 * Methods for sea lice surveillance on marine finfish farms B
TC 249 Traditional chinese medicine
ISO 18664:2015 * Traditional Chinese Medicine — Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine B
TC 258 Project, programme and portfolio management
ISO 21504:2015 * Project, programme and portfolio management — Guidance on portfolio management C
JTC 1 Information technology
ISO/IEC/IEEE 8802-3-1:2015 * Standard for Management Information Base (MIB) — Definitions for Ethernet — Part 3-1: H
ISO/IEC 18092:2013/Cor 1:2015 * Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1) — Technical Corrigendum 1 free
ISO/IEC 29157:2015 * Information technology — Telecommunications and information exchange between systems — PHY/MAC specifications for short-range wireless low-rate applications in the ISM band G
ISO/IEC 16350:2015 * Information technology — Systems and software engineering — Application management H
ISO/IEC 19770-5:2015 * Information technology — IT asset management — Overview and vocabulary — Part 5: D
ISO/IEC 33063:2015 * Information technology — Process assessment — Process assessment model for software testing G
ISO/IEC 7812-1:2015 * Identification cards — Identification of issuers — Part 1: Numbering system A
ISO/IEC 7812-2:2015 * Identification cards — Identification of issuers — Part 2: Application and registration procedures E
ISO/IEC 15693-3:2009/Amd 2:2015 * Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 2: Clarification of use of Data Elements XZ
ISO/IEC 18033-1:2015 * Information technology — Security techniques — Encryption algorithms — Part 1: General C
ISO/IEC TR 27023:2015 * Information technology — Security techniques — Mapping the revised editions of ISO/IEC 27001 and ISO/IEC 27002 D
ISO/IEC 27034-2:2015 * Information technology — Security techniques — Application security — Part 2: Organization normative framework G
ISO/IEC 29102:2015 * Information technology — Office equipment — Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components D
ISO/IEC 13818-1:2015/Amd 1:2015 * Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 1: Delivery of timeline for external data free
ISO/IEC 14496-3:2009/Cor 6:2015 * Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 6 free
ISO/IEC 15444-2:2004/Amd 3:2015 * Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 3: Box-based file format for JPEG XR, extended ROI boxes, XML boxing, compressed channel definition boxes, and representation of floating point F
ISO/IEC 15444-2:2004/Amd 4:2015 * Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 4: Block coder extension XZ
ISO/IEC 23001-8:2013/Amd 1:2015 * Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 1: New audio code points XZ
ISO/IEC 23001-11:2015 * Information technology — MPEG systems technologies — Part 11: Energy-efficient media consumption (green metadata) F
ISO/IEC 23009-1:2014/Amd 2:2015 * Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 2: Spatial relationship description, generalized URL parameters and other extensions XZ
ISO/IEC TS 20013:2015 * Information technology for learning, education and training — A reference framework of e-Portfolio information F
ISO/IEC 19794-7:2014/Amd 1:2015 * Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data — Amendment 1: XML encoding XZ
ISO/IEC 19794-9:2011/Amd 2:2015 * Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 2: XML Encoding and clarification of defects XZ
ISO/IEC 19795-2:2007/Amd 1:2015 * Information technology — Biometric performance testing and reporting — Part 2: Testing methodologies for technology and scenario evaluation — Amendment 1: Testing of multimodal biometric implementations XZ
ISO/IEC TR 29189:2015 * Information technology — Biometrics — Evaluation of examiner assisted biometric applications D
ISO/IEC 29794-6:2015 * Information technology — Biometric sample quality — Part 6: Iris image data E
Zobacz podobne  ISO.org – normy opublikowane w październiku 2017 roku

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków