Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w listopadzie 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w listopadzie 2015 | ISO.org – normy opublikowane w listopadzie 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w listopadzie 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w listopadzie 2015

Nowe normy i standardy opublikowane w listopadzie 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
REMCO Committee on reference materials
ISO Guide 31:2015 * Reference materials — Contents of certificates, labels and accompanying documentation B
TC 2 Fasteners
ISO 2320:2015 Fasteners — Prevailing torque steel nuts — Functional properties D
TC 4 Rolling bearings
ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan D
ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values C
TC 6 Paper, board and pulps
ISO/TR 10688:2015 * Paper, board and pulps — Basic terms and equations for optical properties D
ISO 15360-2:2015 * Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method C
ISO/TS 20460:2015 * Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges C
TC 8 Ships and marine technology
ISO 15371:2015 * Ships and marine technology — Fire-extinguishing systems for protection of galley cooking equipment E
ISO 484-1:2015 * Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m C
ISO 484-2:2015 * Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive C
TC 10 Technical product documentation
ISO 16792:2015 * Technical product documentation — Digital product definition data practices H
TC 20 Aircraft and space vehicles
ISO 18202:2015 * Space data and information transfer systems — Mission operations message abstraction layer H
ISO 20618:2015 * Space data and information transfer systems — Spacecraft onboard interface services — Device enumeration service F
ISO 22642:2015 * Space data and information transfer systems — TC synchronization and channel coding F
ISO 16699:2015 * Space systems — Disposal of orbital launch stages A
ISO 17761:2015 * Space environment (natural and artificial) — Model of high energy radiation at low altitudes (300 km to 600 km) A
ISO 18238:2015 * Space systems — Closed loop problem solving management C
TC 22 Road vehicles
ISO 17536-1:2015 * Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General D
ISO 17449:2015 * Road vehicles — Safety glazing materials — Test methods for properties of electrically heated glazing B
ISO 6460-1:2007/Amd 1:2015 * Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test requirements — Amendment 1 XZ
ISO 6460-3:2007/Amd 1:2015 * Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed — Amendment 1 XZ
ISO/TR 13062:2015 * Electric mopeds and motorcycles – Terminology and classification C
ISO 18580:2015 * Motorcycles — Verification of total running resistance force during mode running on a chassis dynamometer C
ISO/PAS 19695:2015 * Motorcycles — Functional safety E
ISO 28981:2009/Amd 1:2015 * Mopeds – Methods for setting the running resistance on a chassis dynamometer — Amendment 1 XZ
ISO 15500-1:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions B
ISO 15500-7:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas injector A
ISO 15500-8:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator A
ISO 15500-10:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 10: Gas-flow adjuster A
ISO 15500-11:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 11: Gas/air mixer A
ISO 15500-12:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV) A
ISO 15500-20:2015 * Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel A
TC 23 Tractors and machinery for agriculture and forestry
ISO 22401:2015 Equipment for crop protection — Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench B
TC 27 Solid mineral fuels
ISO 1953:2015 * Hard coal — Size analysis by sieving C
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 4263-3:2015 * Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids D
TC 29 Small tools
ISO/TS 13399-203:2015 * Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling C
ISO 5611-1:2015 Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions C
ISO 5611-2:2015 Cartridges, type A, for indexable inserts — Part 2: Style F A
ISO 5611-3:2015 Cartridges, type A, for indexable inserts — Part 3: Style G A
ISO 5611-4:2015 Cartridges, type A, for indexable inserts — Part 4: Style J A
ISO 5611-5:2015 Cartridges, type A, for indexable inserts — Part 5: Style K A
ISO 5611-6:2015 Cartridges, type A, for indexable inserts — Part 6: Style L A
ISO 5611-7:2015 Cartridges, type A, for indexable inserts — Part 7: Style R A
ISO 5611-8:2015 Cartridges, type A, for indexable inserts — Part 8: Style S B
ISO 5611-9:2015 Cartridges, type A, for indexable inserts — Part 9: Style T A
ISO 5611-10:2015 Cartridges, type A, for indexable inserts — Part 10: Style U A
ISO 5611-11:2015 Cartridges, type A, for indexable inserts — Part 11: Style W A
ISO 5611-12:2015 Cartridges, type A, for indexable inserts — Part 12: Style Y A
TC 31 Tyres, rims and valves
ISO 5775-2:2015 Bicycle tyres and rims — Part 2: Rims C
TC 34 Food products
ISO 20633:2015 Infant formula and adult nutritionals — Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography D
ISO 20634:2015 Infant formula and adult nutritionals — Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC) C
ISO 20637:2015 Infant formula and adult nutritionals — Determination of myo-inositol by liquid chromatography and pulsed amperometry C
ISO 20638:2015 Infant formula — Determination of nucleotides by liquid chromatography C
ISO 20639:2015 Infant formula and adult nutritionals — Determination of pantothenic acid by ultra high performance liquid chromatography and tandem mass spectrometry method (UHPLC-MS/MS) B
ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum) B
ISO 22630:2015 Oilseed meals — Determination of oil content — Rapid extraction method B
ISO 16958:2015 Milk, milk products, infant formula and adult nutritionals — Determination of fatty acids composition — Capillary gas chromatographic method F
ISO 20647:2015 Infant formula and adult nutritionals — Determination of total iodine — Inductively coupled plasma mass spectrometry (ICP-MS) C
ISO 20649:2015 Infant formula and adult nutritionals — Determination of chromium, selenium and molybdenum — Inductively coupled plasma mass spectrometry (ICP-MS) B
ISO 5985:2002/Amd 1:2015 Animal feeding stuffs — Determination of ash insoluble in hydrochloric acid — Amendment 1 XZ
ISO 12228-1:2014 * Determination of individual and total sterols contents — Gas chromatographic method — Part 1: Animal and vegetable fats and oils D
ISO/TR 17622:2015 * Molecular biomarker analysis — SSR analysis of sunflower A
TC 35 Paints and varnishes
ISO/TS 19397:2015 * Determination of the film thickness of coatings using an ultrasonic gage C
ISO 4630:2015 Clear liquids — Estimation of colour by the Gardner colour scale A
ISO 6271:2015 Clear liquids — Estimation of colour by the platinum-cobalt colour scale A
ISO 16482-1:2013 Binders for paints and varnishes — Determination of the non-volatile-matter content of aqueous rosin-resin dispersions — Part 1: Oven method A
ISO 16482-2:2013 Binders for paints and varnishes — Determination of the non-volatile-matter content of aqueous rosin-resin dispersions — Part 2: Microwave method A
TC 38 Textiles
ISO 18074:2015 Textiles — Identification of some animal fibres by DNA analysis method — Cashmere, wool, yak and their blends D
ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method B
TC 39 Machine tools
ISO 16089:2015 Machine tools — Safety — Stationary grinding machines H
TC 42 Photography
ISO 19262:2015 * Photography — Archiving Systems — Vocabulary F
TC 43 Acoustics
ISO 16283-2:2015 Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation F
TC 44 Welding and allied processes
ISO 636:2015 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification B
ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification C
ISO 17632:2015 Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification E
ISO 18273:2015 Welding consumables — Wire electrodes, wires and rods for  welding of aluminium and aluminium alloys — Classification A
TC 45 Rubber and rubber products
ISO 4079:2015 * Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification B
ISO 4642-1:2015 * Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems C
ISO 4642-2:2015 * Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles E
ISO 249:2014 * Rubber, raw natural — Determination of dirt content B
ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C A
ISO 6123-2:2015 * Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics B
TC 58 Gas cylinders
ISO 11623:2015 Gas cylinders — Composite construction — Periodic inspection and testing E
ISO/TR 17329:2015 * Gas cylinders — Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes E
TC 59 Buildings and civil engineering works
ISO 19861:2015 * Buildings and civil engineering works — Sealants — Determination of curing behaviour A
ISO 19862:2015 * Buildings and civil engineering works — Sealants — Durability to extension compression cycling under accelerated weathering B
TC 61 Plastics
ISO 20200:2015 Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test B
ISO 18263-2:2015 * Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties B
ISO 19062-1:2015 Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications B
ISO 19063-1:2015 Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications B
ISO 19064-1:2015 Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications A
ISO 2078:1993/Amd 1:2015 Textile glass — Yarns — Designation — Amendment 1 XZ
ISO 15039:2003/Amd 1:2015 Textile-glass rovings — Determination of solubility of size — Amendment 1 XZ
TC 69 Applications of statistical methods
ISO/TS 17503:2015 * Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs D
ISO 18404:2015 * Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation E
TC 70 Internal combustion engines
ISO 8178-5:2015 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels F
TC 72 Textile machinery and accessories
ISO 18600:2015 * Textile machinery and accessories — Web roller cards — Terms and definitions B
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 1135-4:2015 Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed C
ISO 1135-5:2015 Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus D
ISO 11040-1:2015 * Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges A
TC 83 Sports and other recreational facilities and equipment
ISO 10958-2:2015 Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts A
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 15382:2015 Radiological protection — Procedures for monitoring the dose to the lens of the eye, the skin and the extremities E
ISO 18589-3:2015 Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry D
ISO 20785-3:2015 * Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes C
ISO 21909-1:2015 Passive neutron dosimetry systems — Part 1: Performance and test requirements for personal dosimetry F
TC 89 Wood-based panels
ISO 12460-5:2015 Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perforator method) C
TC 92 Fire safety
ISO 16730-1:2015 Fire safety engineering — Procedures and requirements for verification and validation of calculation methods — Part 1: General F
ISO 16733-1:2015 Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios E
TC 94 Personal safety — Protective clothing and equipment
ISO 11999-5:2015 * PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets D
ISO 16900-14:2015 * Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level B
ISO/TS 16976-1:2015 * Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates D
TC 96 Cranes
ISO 15442:2012/Amd 1:2015 * Cranes — Safety requirements for loader cranes — Amendment 1 XZ
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets E
ISO 4347:2015 Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths D
TC 102 Iron ore and direct reduced iron
ISO 2597-2:2015 * Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction C
TC 104 Freight containers
ISO 18185-3:2015 * Freight containers — Electronic seals — Part 3: Environmental characteristics C
TC 106 Dentistry
ISO 13017:2012/Amd 1:2015 Dentistry — Magnetic attachments — Amendment 1 XZ
ISO 19429:2015 Dentistry — Designation system for dental implants A
TC 107 Metallic and other inorganic coatings
ISO 28721-2:2015 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock A
ISO 28721-4:2015 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings A
TC 108 Mechanical vibration, shock and condition monitoring
ISO 2017-3:2015 Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings B
ISO 16063-43:2015 * Methods for the calibration of vibration and shock transducers — Part 43: Calibration of accelerometers by model-based parameter identification D
ISO 8727:1997/Amd 1:2015 Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems — Amendment 1 XZ
ISO 13374-4:2015 * Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation A
ISO 13381-1:2015 Condition  monitoring and diagnostics of  machines — Prognostics — Part 1: General guidelines D
TC 110 Industrial trucks
ISO 10896-4:2015 * Rough-terrain trucks — Safety requirements and verification — Part 4: Additional requirements for variable-reach trucks handling freely suspended loads B
TC 111 Round steel link chains, chain slings, components and accessories
ISO 3266:2010/Amd 1:2015 Forged steel eyebolts grade 4 for general lifting purposes — Amendment 1 XZ
TC 115 Pumps
ISO/ASME 14414:2015 Pump system energy assessment G
TC 121 Anaesthetic and respiratory equipment
IEC 60601-1-12:2015 * Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment H
TC 122 Packaging
ISO 780:2015 Packaging — Distribution packaging — Graphical symbols for handling and storage of packages B
ISO 8317:2015 Child-resistant packaging — Requirements and testing procedures for reclosable packages C
ISO 21067-2:2015 * Packaging — Vocabulary — Part 2: Packaging and the environment terms B
TC 127 Earth-moving machinery
ISO 10261:2002/Amd 1:2015 Earth-moving machinery — Product identification numbering system — Amendment 1 XZ
TC 136 Furniture
ISO 9221-1:2015 * Furniture — Children’s high chairs — Part 1: Safety requirements B
ISO 9221-2:2015 * Furniture — Children’s high chairs — Part 2: Test methods D
TC 153 Valves
ISO 17292:2015 Metal ball valves for petroleum, petrochemical and allied industries D
ISO 28921-2:2015 Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing C
TC 156 Corrosion of metals and alloys
ISO 18070:2015 Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel B
ISO 18089:2015 Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control C
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23550:2011/Amd 1:2015 * Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1 XZ
TC 163 Thermal performance and energy use in the built environment
ISO 6781-3:2015 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of equipment operators, data analysts and report writers C
TC 164 Mechanical testing of metals
ISO 11531:2015 * Metallic materials — Sheet and strip — Earing test A
ISO 18338:2015 Metallic materials — Torsion test at ambient temperature C
TC 172 Optics and photonics
ISO 14132-1:2015 * Optics and photonics — Vocabulary for telescopic systems — Part 1: General terms and alphabetical indexes of terms in ISO 14132 A
ISO 14132-2:2015 * Optics and photonics — Vocabulary for telescopic systems — Part 2: Terms for binoculars, monoculars and spotting scopes A
ISO/TS 18339:2015 * Endotherapy devices — Eyepiece cap and light guide connector A
ISO 13694:2015 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution C
TC 173 Assistive products for persons with disability
ISO 7176-19:2008/Amd 1:2015 * Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles — Amendment 1: Annex G XZ
ISO 10865-2:2015 Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 2: Systems for forward-facing wheelchair-seated passengers E
TC 176 Quality management and quality assurance
ISO 9000:2015 * Quality management systems — Fundamentals and vocabulary G
ISO 9001:2015 * Quality management systems — Requirements E
TC 182 Geotechnics
ISO 17892-3:2015 * Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density B
TC 184 Automation systems and integration
ISO 8000-8:2015 * Data quality — Part 8: Information and data quality: Concepts and measuring C
TC 188 Small craft
ISO 9094:2015 Small craft — Fire protection E
ISO 21487:2012/Amd 2:2015 Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 XZ
TC 194 Biological and clinical evaluation of medical devices
ISO 22442-1:2015 * Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk management E
ISO 22442-2:2015 * Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling C
TC 199 Safety of machinery
ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards E
ISO 14123-2:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures A
ISO/TR 24119:2015 Safety of machinery — Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts D
TC 201 Surface chemical analysis
ISO 19830:2015 * Surface chemical analysis — Electron spectroscopies — Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy D
TC 204 Intelligent transport systems
ISO 12813:2015 Electronic fee collection — Compliance check communication for autonomous systems F
ISO 13141:2015 Electronic fee collection — Localisation augmentation communication for autonomous systems E
ISO/TS 15638-13:2015 * Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 13: „Mass” information for jurisdictional control and enforcement G
ISO 15784-2:2015 * Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre to field device communications using SNMP F
ISO/TR 17185-2:2015 * Intelligent transport systems — Public transport user information — Part 2: Public transport data and interface standards catalogue and cross references H
ISO 24102-2:2015 * Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 2: Remote management of ITS-SCUs D
TC 206 Fine ceramics
ISO 14629:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders B
ISO 17170:2015 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for spherical indentation of porous ceramics B
ISO 18452:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thickness of ceramic films by contact-probe profilometer B
ISO 18591:2015 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of compressive strength of ceramic granules B
ISO 20502:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of adhesion of ceramic coatings by scratch testing E
ISO 20504:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature D
ISO 26423:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of coating thickness by crater-grinding method C
ISO 26443:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings A
TC 211 Geographic information/Geomatics
ISO 19109:2015 Geographic information — Rules for application schema H
TC 215 Health informatics
ISO/HL7 10781:2015 Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) G
ISO 17090-2:2015 * Health informatics — Public key infrastructure — Part 2: Certificate profile E
ISO 21549-5:2015 Health informatics — Patient healthcard data — Part 5: Identification data B
TC 217 Cosmetics
ISO 18416:2015 Cosmetics — Microbiology — Detection of Candida albicans C
ISO 21150:2015 Cosmetics — Microbiology — Detection of Escherichia coli C
ISO 22717:2015 Cosmetics — Microbiology — Detection of Pseudomonas aeruginosa C
ISO 22718:2015 Cosmetics — Microbiology — Detection of Staphylococcus aureus C
TC 220 Cryogenic vessels
ISO 21009-2:2015 Cryogenic vessels — Static vacuum insulated vessels
— Part 2: Operational requirements
C
TC 221 Geosynthetics
ISO 18325:2015 Geosynthetics — Test method for the determination of water discharge capacity for prefabricated vertical drains B
TC 226 Materials for the production of primary aluminium
ISO 19950:2015 * Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas B
ISO 23201:2015 * Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method E
TC 229 Nanotechnologies
ISO/TS 18110:2015 Nanotechnologies — Vocabularies for science, technology and innovation indicators A
ISO/TS 80004-1:2015 Nanotechnologies — Vocabulary — Part 1: Core terms A
TC 238 Solid biofuels
ISO/TS 16996:2015 Solid biofuels — Determination of elemental composition by X-ray fluorescence C
TC 241 Road traffic safety management systems
ISO 39001:2012 Road traffic safety (RTS) management systems – Requirements with guidance for use F
TC 249 Traditional chinese medicine
ISO 18665:2015 * Traditional Chinese medicine — Herbal decoction apparatus B
ISO 18666:2015 * Traditional Chinese medicine — General requirements of moxibustion devices B
TC 256 Pigments, dyestuffs and extenders
ISO 18451-1:2015 * Pigments, dyestuffs and extenders — Terminology — Part 1: General terms D
ISO 18451-2:2015 * Pigments, dyestuffs and extenders — Terminology — Part 2: Classification of colouring materials according to colouristic and chemical aspects C
TC 258 Project, programme and portfolio management
ISO 21504:2015 Project, programme and portfolio management — Guidance on portfolio management C
TC 263 Coalbed methane (CBM)
ISO 18875:2015 * Coalbed methane exploration and development — Terms and definitions B
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 3380:2015 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C A
ISO 17235:2015 Leather — Physical and mechanical tests — Determination of softness A
CASCO Committee on conformity assessment
ISO/IEC TS 17021-5:2014 * Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset management systems B
JTC 1 Information technology
ISO/IEC 8824-1:2015 * Information technology — Abstract Syntax Notation One (ASN.1): Specification of basic notation — Part 1: H
ISO/IEC 8824-2:2015 * Information technology — Abstract Syntax Notation One (ASN.1): Information object specification — Part 2: E
ISO/IEC 8824-3:2015 * Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification — Part 3: B
ISO/IEC 8824-4:2015 * Information technology — Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications — Part 4: C
ISO/IEC 8825-1:2015 * Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1: E
ISO/IEC 8825-2:2015 * Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2: G
ISO/IEC 8825-3:2015 * Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) — Part 3: H
ISO/IEC 8825-4:2015 * Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4: G
ISO/IEC 8825-5:2015 * Information technology — ASN.1 encoding rules:  Mapping W3C XML schema definitions into ASN.1 — Part 5: G
ISO/IEC 8825-6:2015 * Information technology — ASN.1 encoding rules: Registration and application of PER encoding instructions — Part 6: C
ISO/IEC 8825-7:2015 * Information technology — ASN.1 encoding rules — Part 7: Specification of Octet Encoding Rules (OER) D
ISO/IEC 15026-3:2015 * Systems and software engineering — Systems and software assurance — Part 3: System integrity levels D
ISO/IEC 26550:2015 * Software and systems engineering — Reference model for product line engineering and management E
ISO/IEC 26555:2015 * Software and systems engineering — Tools and methods for product line technical management G
ISO/IEC 29110-2-1:2015 * Software Engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2-1: Framework and taxonomy E
ISO/IEC TR 29110-5-6-1:2015 * Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-1: Systems engineering — Management and engineering guide: Generic profile group: Entry profile F
ISO/IEC 29155-3:2015 * Systems and software engineering — Information technology project performance benchmarking framework — Part 3: Guidance for reporting C
ISO/IEC 17839-2:2015 * Information technology — Biometric System-on-Card — Part 2: Physical characteristics A
ISO/IEC 18328-2:2015 * Identification cards — ICC-managed devices — Part 2: Physical characteristics and test methods for cards with devices C
ISO/IEC 18584:2015 * Information technology  — Identification cards — Conformance test requirements for on-card biometric comparison applications C
ISO/IEC TS 18508:2015 * Information technology — Additional Parallel Features in Fortran G
ISO/IEC TS 19217:2015 * Information technology — Programming languages — C++ Extensions for concepts G
ISO/IEC 30191:2015 * Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk H
ISO/IEC 19776-1:2015 * Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 1: Extensible Markup Language (XML) encoding F
ISO/IEC 19776-2:2015 * Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) encodings — Part 2: Classic VRML encoding A
ISO/IEC 18033-5:2015 * Information technology — Security techniques — Encryption algorithms — Part 5: Identity-based ciphers F
ISO/IEC 19790:2012 * Information technology — Security techniques — Security requirements for cryptographic modules G
ISO/IEC 24759:2014 * Information technology — Security techniques — Test requirements for cryptographic modules H
ISO/IEC 27001:2013/Cor 2:2015 * Information technology — Security techniques — Information security management systems — Requirements — Technical Corrigendum 2 free
ISO/IEC 27002:2013/Cor 2:2015 * Information technology — Security techniques — Code of practice for information security controls — Technical Corrigendum 2 free
ISO/IEC 27010:2015 * Information technology — Security techniques — Information security management for inter-sector and inter-organizational communications E
ISO/IEC 27013:2015 * Information technology — Security techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 F
ISO/IEC 27017:2015 * Information technology — Security techniques — Code of practice for information security controls based on ISO/IEC 27002 for cloud services E
ISO/IEC 24711:2015 * Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components E
ISO/IEC 14496-3:2009/Cor 7:2015 * Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 7 free
ISO/IEC 14496-4:2004/Amd 43:2015 * Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 43: 3D-AVC conformance testing XZ
ISO/IEC 14496-5:2001/Amd 36:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software XZ
ISO/IEC 14496-5:2001/Amd 37:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 37: New levels for the AAC profiles, uniDRC support, AAC block length parameter corrections XZ
ISO/IEC 14496-10:2014/Amd 1:2015 * Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolution frame compatible stereoscopic video with depth maps, additional supplemental enhancement information and video usability information XZ
ISO/IEC 14496-11:2015 * Information technology — Coding of audio-visual objects — Part 11: Scene description and application engine H
ISO/IEC 14496-12:2015 * Information technology — Coding of audio-visual objects — Part 12: ISO base media file format H
ISO/IEC 14496-27:2009/Amd 5:2015 * Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 5: Multi-resolution 3D mesh compression XZ
ISO/IEC 15444-1:2004/Amd 7:2015 * Information technology — JPEG 2000 image coding system: Core coding system — Part 1:  — Amendment 7: Profiles for an interoperable master format (IMF) XZ
ISO/IEC 15444-12:2015 * Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format H
ISO/IEC 15938-5:2003/Amd 5:2015 * Information technology — Multimedia content description interface — Part 5: Multimedia description schemes — Amendment 5: Quality metadata, multiple text encodings, extended classification metadata XZ
ISO/IEC 23003-4:2015 * Information technology — MPEG audio technologies — Part 4: Dynamic Range Control H
ISO/IEC TR 23008-13:2015 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 13: MMT implementation guidelines G
ISO/IEC 29199-5:2012/Amd 1:2015 * Information technology — JPEG XR image coding system — Part 5: Reference software — Amendment 1: Extension of the Reference Software: Support for the Boxed Based File Format XZ
ISO/IEC 18046-4:2015 * Information technology — Radio frequency identification device performance test methods — Part 4: Test methods for performance of RFID gates in libraries F
ISO/IEC 29167-16:2015 * Information technology — Automatic identification and data capture techniques — Part 16: Crypto suite ECDSA-ECDH security services for air interface communications E
ISO/IEC 15944-20:2015 * Information technology — Business Operational View — Part 20: Linking business operational view to functional Linking business operational view to functional service viewservice view E
ISO/IEC TS 20071-21:2015 * Information technology — User interface component accessibility — Part 21: Guidance on audio descriptions D
ISO/IEC TR 30109:2015 * Information technology — User interfaces — Worldwide availability of personalized computer environments B
ISO/IEC 19788-8:2015 * Information technology — Learning, education and training — Metadata for learning resources — Part 8: Data elements for MLR records E
ISO/IEC 19788-9:2015 * Information technology — Learning, education and training — Metadata for learning resources — Part 9: Data elements for persons D
ISO/IEC 19794-2:2011/Amd 2:2015 * Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 2: XML encoding and clarification of defects XZ
ISO/IEC 19794-4:2011/Amd 2:2015 * Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 2: XML encoding and clarification of defects D
ISO/IEC 19794-5:2011/Amd 2:2015 * Information technology — Biometric data interchange formats — Part 5: Face image data — Amendment 2: XML encoding and clarification of defects G
ISO/IEC 19794-5:2005/Cor 4:2015 * Information technology — Biometric data interchange formats — Part 5: Face image data — Technical Corrigendum 4 free
ISO/IEC 19794-7:2014/Amd 1:2015 * Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data — Amendment 1: XML encoding XZ
ISO/IEC TR 24722:2015 * Information technology — Biometrics — Multimodal and other multibiometric fusion D
ISO/IEC 24779-9:2015 * Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 9: Vascular applications A
ISO/IEC TR 29156:2015 * Information technology — Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics F
ISO/IEC 30108-1:2015 * Information technology — Biometric Identity Assurance Services — Part 1: BIAS services G
ISO/IEC TR 30110:2015 * Information technology — Cross jurisdictional and societal aspects of implementation of biometric technologies — Biometrics and children B
ISO/IEC TR 20000-10:2015 * Information technology — Service management — Part 10: Concepts and terminology D

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków