Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w listopadzie 2016 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w listopadzie 2016 roku | ISO.org – normy opublikowane w listopadzie 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w listopadzie 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w listopadzie 2016 roku

Nowe normy i standardy opublikowane w listopadzie 2016 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

PC 278 Anti-bribery management systems  Grupa
cenowa
ISO 37001:2016 Anti-bribery management systems — Requirements with guidance for use F
TC 6 Paper, board and pulps
ISO 18522:2016 Paper and board — Automated off-line testing of physical properties for CD (cross direction) profiles E
ISO/TS 20460:2015 Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges C
TC 8 Ships and marine technology
ISO 19030-1:2016 * Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles E
ISO 19030-2:2016 * Ships and marine technology — Measurement of changes in hull and propeller performance — Part 2: Default method F
ISO 19030-3:2016 * Ships and marine technology — Measurement of changes in hull and propeller performance — Part 3: Alternative methods C
ISO 3078:2016 * Shipbuilding — Cargo winches B
ISO 19354:2016 * Ships and marine technology — Marine cranes — General requirements C
ISO 19357:2016 * Ships and marine technology — Marine cranes — Design requirements for low temperature operation B
ISO 19360:2016 * Ships and marine technology — Marine cranes — Technical requirements for rigging applications B
ISO 19697:2016 * Ships and marine technology — Navigation and ship operations — Electronic inclinometers D
TC 10 Technical product documentation
ISO 12757-1:2016 Ball point pens and refills — Part 1: General use B
TC 17 Steel
ISO/TS 10719:2016 * Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace C
TC 20 Aircraft and space vehicles
ISO 43:2016 * Aircraft — Jacking pads A
ISO 8575:2016 * Aerospace — Fluid systems — Hydraulic system tubing B
ISO 10537:2016 * Space data and information transfer systems — Encapsulation service E
ISO 18440:2016 * Space data and information transfer systems — Space link extension — Internet protocol for transfer services G
ISO 18441:2016 * Space data and information transfer systems — Space link extension — Application program interface for transfer services — Core specification H
ISO 18442:2016 * Space data and information transfer systems — Space link extension — Application program interface for return all frames service G
ISO 18443:2016 * Space data and information transfer systems — Space link extension — Application program interface for return channel frames service G
ISO 18444:2016 * Space data and information transfer systems — Space link extension — Application program interface for return operational control fields service G
ISO 18445:2016 * Space data and information transfer systems — Space link extension — Application program interface for the forward CLTU service H
ISO 18446:2016 * Space data and information transfer systems — Space link extension — Application program interface for the forward space packet service H
ISO 21323:2016 * Space data and information transfer systems — CCSDS Bundle protocol specification H
ISO 21324:2016 * Space data and information transfer systems — Space data link security protocol G
ISO 22645:2016 * Space data and information transfer systems — TM (telemetry) space data link protocol H
ISO 22664:2016 * Space data and information transfer systems — TC (telecommand) space data link protocol H
ISO 22666:2016 * Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol H
ISO 17540:2016 * Space systems — Liquid rocket engines and test stands — Terms and definitions A
ISO 17666:2016 * Space systems — Risk management D
ISO 18257:2016 * Space systems — Semiconductor integrated circuits for space applications — Design requirements D
TC 22 Road vehicles
ISO 13400-3:2016 * Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3 C
ISO/TR 17987-5:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 5: Application programmers interface (API) E
ISO 8820-4:2016 * Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures C
ISO 18375:2016 * Heavy commercial vehicles and buses — Test method for yaw stability — Sine with dwell test C
ISO 2698:2016 * Diesel engines — Clamp-mounted fuel injectors, types 7 and 28 A
ISO 2974:2016 * Diesel engines — 60° female cones for high-pressure fuel injection components B
ISO 8535-1:2016 * Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes B
ISO 18418-1:2016 * Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors A
ISO 19724:2016 * Gasoline engines with direct injection — Cleanliness assessment of fuel injection equipment A
ISO 15082:2016 * Road vehicles — Tests for rigid plastic safety glazing materials F
ISO/TR 17950:2016 * Impact test procedures for road vehicles — Rear seat positioning procedures for Hybrid III 5th percentile female dummy B
ISO 18300:2016 * Electrically propelled vehicles — Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor C
ISO 15501-1:2016 * Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements C
ISO 15501-2:2016 * Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods B
TC 23 Tractors and machinery for agriculture and forestry
ISO 3767-2:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery G
TC 27 Solid mineral fuels
ISO 622:2016 * Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method A
ISO 11723:2016 * Solid mineral fuels — Determination of arsenic and selenium — Eschka’s mixture and hydride generation method A
ISO 11724:2016 * Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash B
ISO 15237:2016 * Solid mineral fuels — Determination of total mercury content of coal A
ISO 15238:2016 * Solid mineral fuels — Determination of total cadmium content of coal A
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 19291:2016 * Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus C
ISO/TR 19686-100:2016 * Petroleum products — Equivalency of test method determining the same property — Part 100: Background and principle of the comparison and the evaluation of equivalency A
ISO 15380:2016 Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR D
ISO 29945:2016 * Refrigerated non-petroleum based liquefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals B
TC 29 Small tools
ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks B
ISO 1711-1:2016 Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets A
ISO 1711-2:2016 Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) A
TC 34 Food products
ISO/TS 34700:2016 * Animal welfare management — General requirements and guidance for organizations in the food supply chain B
ISO/TS 21569-4:2016 * Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences B
ISO/TS 21569-5:2016 * Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence B
ISO/TS 21569-6:2016 * Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences B
TC 35 Paints and varnishes
ISO 15741:2016 * Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases D
TC 38 Textiles
ISO 12947-2:2016 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown C
TC 44 Welding and allied processes
ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials C
ISO 17637:2016 Non-destructive testing of welds — Visual testing of fusion-welded joints B
TC 45 Rubber and rubber products
ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge — Specification B
ISO 6804:2016 * Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification C
ISO 4666-3:2016 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) C
ISO 1421:2016 * Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break C
ISO 5470-1:2016 * Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader B
TC 58 Gas cylinders
ISO 24431:2016 Gas cylinders — Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) — Inspection at time of filling C
TC 59 Buildings and civil engineering works
ISO 12006-3:2007 Building construction — Organization of information about construction works — Part 3: Framework for object-oriented information E
ISO 16757-2:2016 * Data structures for electronic product catalogues for building services — Part 2: Geometry H
TC 60 Gears
ISO 23509:2016 Bevel and hypoid gear geometry H
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 17776:2016 * Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations H
ISO 20088-1:2016 Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase D
TC 70 Internal combustion engines
ISO 15550:2016 Internal combustion engines — Determination and method for the measurement of engine power — General requirements F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-2:2016 * Testing of concrete — Part 2: Properties of fresh concrete G
ISO 15673:2016 * Guidelines for the simplified design of structural reinforced concrete for buildings H
TC 72 Textile machinery and accessories
ISO 96-1:2016 * Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8536-6:2016 * Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles C
ISO 8536-14:2016 Infusion equipment for medical use — Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact A
ISO 11040-8:2016 Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes B
ISO 11418-1:2016 * Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles A
ISO 11418-2:2016 * Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups A
ISO 11418-3:2016 * Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms A
TC 83 Sports and other recreational facilities and equipment
ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods A
ISO 20957-5:2016 Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods D
ISO 10256-1:2016 Protective equipment for use in ice hockey — Part 1: General requirements A
ISO 10256-2:2016 Protective equipment for use in ice hockey — Part 2: Head protection for skaters D
ISO 10256-3:2016 Protective equipment for use in ice hockey — Part 3: Face protectors for skaters E
ISO 10256-4:2016 Protective equipment for use in ice hockey — Part 4: Head and face protection for goalkeepers B
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 16638-1:2015 Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds F
ISO 16645:2016 * Radiological protection — Medical electron accelerators — Requirements and recommendations for shielding design and evaluation G
ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste F
TC 92 Fire safety
ISO 12828-2:2016 * Validation methods for fire gas analyses — Part 2: Intralaboratory validation of quantification methods E
ISO 16312-1:2016 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Criteria B
TC 94 Personal safety — Protective clothing and equipment
ISO 9151:2016 Protective clothing against heat and flame — Determination of heat transmission on exposure to flame C
ISO 15025:2016 Protective clothing — Protection against flame — Method of test for limited flame spread D
ISO/TS 16975-1:2016 Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and implementing a respiratory protective device programme G
TC 106 Dentistry
ISO/TR 28642:2016 * Dentistry — Guidance on colour measurement B
TC 107 Metallic and other inorganic coatings
ISO 19487:2016 * Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings B
ISO 19598:2016 Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 8608:2016 * Mechanical vibration — Road surface profiles — Reporting of measured data F
ISO 20816-1:2016 * Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines E
ISO 21940-11:2016 * Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour E
ISO 5344:2004/Amd 1:2016 * Electrodynamic  vibration generating systems — Performance characteristics — Amendment 1 XZ
ISO 8626:1989/Amd 1:2016 * Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1 XZ
TC 110 Industrial trucks
ISO 22879:2016 * Castors and wheels — Requirements for castors for furniture B
ISO 22880:2016 * Castors and wheels — Requirements for castors for swivel chairs B
ISO 22882:2016 * Castors and wheels — Requirements for castors for hospital beds B
ISO 3691-3:2016 Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads C
TC 121 Anaesthetic and respiratory equipment
ISO 19054:2005/Amd 1:2016 Rail systems for supporting medical equipment — Amendment 1 XZ
TC 122 Packaging
ISO 18616-1:2016 * Transport packaging — Reusable, rigid plastic distribution boxes — Part 1: General purpose application C
ISO 18616-2:2016 * Transport packaging — Reusable, rigid plastic distribution boxes — Part 2: General specifications for testing B
ISO 19709-1:2016 * Transport packaging — Small load container systems — Part 1: Common requirements and test methods C
TC 126 Tobacco and tobacco products
ISO 19290:2016 Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS C
TC 127 Earth-moving machinery
ISO/TS 15143-3:2016 * Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 3: Telematics data G
TC 130 Graphic technology
ISO 12647-7:2016 * Graphic technology — Process control for the production of halftone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data D
ISO 16762:2016 * Graphic technology — Post-press — General requirements for transfer, handling and storage C
TC 131 Fluid power systems
ISO 9974-4:2016 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs B
TC 135 Non-destructive testing
ISO 9934-1:2016 Non-destructive testing — Magnetic particle testing — Part 1: General principles C
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/TS 17902:2016 * Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers C
TC 142 Cleaning equipment for air and other gases
ISO 16890-1:2016 * Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) E
ISO 16890-2:2016 * Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance G
ISO 16890-3:2016 * Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured D
ISO 16890-4:2016 * Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency B
TC 146 Air quality
ISO 18466:2016 * Stationary source emissions — Determination of the biogenic fraction in CO2 in stack gas using the balance method D
ISO 20581:2016 * Workplace air — General requirements for the performance of procedures for the measurement of chemical agents C
TC 147 Water quality
ISO 13165-3:2016 Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry C
ISO 14189:2013 Water quality — Enumeration of Clostridium perfringens — Method using membrane filtration B
ISO 10253:2016 Water quality — Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum D
TC 149 Cycles
ISO 4210-4:2014 Cycles — Safety requirements for bicycles — Part 4: Braking test methods E
TC 150 Implants for surgery
ISO 5832-7:2016 Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy A
ISO 7199:2016 * Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) C
ISO 21535:2007/Amd 1:2016 Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants — Amendment 1 XZ
TC 156 Corrosion of metals and alloys
ISO 12696:2016 Cathodic protection of steel in concrete F
TC 160 Glass in building
ISO 16293-4:2016 * Glass in building — Basic soda lime silicate glass products — Part 4: Wired patterned glass B
ISO 16293-5:2016 * Glass in building — Basic soda lime silicate glass products — Part 5: Patterned glass B
ISO 16932:2016 Glass in building — Destructive-windstorm-resistant security glazing — Test and classification D
TC 163 Thermal performance and energy use in the built environment
ISO 18523-1:2016 * Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 1: Non-residential buildings H
ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method D
TC 164 Mechanical testing of metals
ISO 12135:2016 * Metallic materials — Unified method of test for the determination of quasistatic fracture toughness H
TC 165 Timber structures
ISO 18402:2016 Timber structures — Structural insulated panel roof construction — Test methods D
TC 171 Document management applications
ISO 19444-1:2016 * Document management — XML Forms Data Format — Part 1: Use of ISO 32000-2 (XFDF 3.0) G
TC 172 Optics and photonics
ISO 14490-7:2016 * Optics and photonics — Test methods for telescopic systems — Part 7: Test methods for limit of resolution B
ISO 9344:2016 * Microscopes — Graticules for eyepieces A
TC 178 Lifts, escalators and moving walks
ISO/TR 22201-3:2016 * Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE B
TC 184 Automation systems and integration
ISO 8000-61:2016 * Data quality — Part 61: Data quality management: Process reference model D
ISO/TS 10303-1310:2014 * Industrial automation systems and integration — Product data representation and exchange — Part 1310: Application module: Draughting element B
TC 189 Ceramic tile
ISO 10545-13:2016 Ceramic tiles — Part 13: Determination of chemical resistance B
TC 193 Natural gas
ISO 23874:2006 Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation D
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-6:2016 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation E
TC 204 Intelligent transport systems
ISO 13140-1:2016 * Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 1: Test suite structure and test purposes F
ISO 13140-2:2016 * Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 2: Abstract test suite C
ISO 13143-1:2016 * Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes G
ISO 13143-2:2016 * Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 2: Abstract test suite C
TC 206 Fine ceramics
ISO 22197-1:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide C
TC 207 Environmental management
ISO 14034:2016 Environmental management — Environmental technology verification (ETV) D
TC 210 Quality management and corresponding general aspects for medical devices
ISO 15223-1:2016 Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements D
ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications F
TC 211 Geographic information/Geomatics
ISO 19110:2016 * Geographic information — Methodology for feature cataloguing G
ISO/TS 19157-2:2016 * Geographic information  — Data quality — Part 2: XML schema implementation D
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-31:2016 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters B
TC 215 Health informatics
ISO/TS 16843-1:2016 * Health informatics — Categorial structures for representation of acupuncture — Part 1: Acupuncture points E
ISO 21549-7:2016 * Health informatics — Patient healthcard data — Part 7: Medication data F
TC 217 Cosmetics
ISO 22716:2007 * Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices D
TC 218 Timber
ISO 13061-13:2016 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage A
ISO 13061-14:2016 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage A
TC 219 Floor coverings
ISO 20253:2016 Textile floor coverings — Blade test — Flocked textile floor covering A
TC 224 Service activities relating to drinking water supply systems and wastewater systems – Quality criteria of the service and performance indicators
ISO 24516-1:2016 Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks F
TC 229 Nanotechnologies
ISO/TR 18196:2016 * Nanotechnologies — Measurement technique matrix for the characterization of nano-objects G
ISO/TR 18637:2016 * Nanotechnologies — Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs) G
TC 268 Sustainable cities and communities
ISO 37100:2016 * Sustainable cities and communities — Vocabulary A
TC 269 Railway applications
ISO/TR 21245-1:2016 * Railway applications — Rail project planning process — Part 1: Stakeholders and their needs/interests C
CASCO Committee on conformity assessment
ISO/IEC 17021-2:2016 * Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of environmental management systems B
ISO/IEC TS 17021-9:2016 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems A
JTC 1 Information technology
ISO/IEC 9594-8:2014/Cor 3:2016 * Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 3 free
ISO/IEC TS 24748-6:2016 * Systems and software engineering — Life cycle management — Part 6: System integration engineering E
ISO/IEC/IEEE 29119-5:2016 * Software and systems engineering — Software testing — Part 5: Keyword-Driven Testing G
ISO/IEC 7816-8:2016 * Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations F
ISO/IEC TR 15067-3-2:2016 * Information technology — Home Electronic System (HES) application model — Part 3-2: GridWise interoperability context-setting framework F
ISO/IEC 18370-1:2016 * Information technology — Security techniques — Blind digital signatures — Part 1: General E
ISO/IEC 19592-1:2016 * Information technology — Security techniques — Secret sharing — Part 1: General B
ISO/IEC 27011:2016 * Information technology — Security techniques — Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations E
ISO/IEC 27050-1:2016 * Information technology — Security techniques — Electronic discovery — Part 1: Overview and concepts D
ISO/IEC 14496-4:2004/Amd 45:2016 * Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 45: Conformance Testing for the Multi-resolution Frame Compatible Stereo Coding with Depth Maps Extension of AVC XZ
ISO/IEC 14496-26:2010/Amd 4:2016 * Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 4: AAC Additional Multichannel Conformance Data XZ
ISO/IEC 21000-22:2016 * Information technology — Multimedia framework (MPEG-21) — Part 22: User Description H
ISO/IEC 23008-3:2015/Amd 4:2016 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 4: Carriage of system data XZ
ISO/IEC 18305:2016 * Information technology — Real time locating systems — Test and evaluation of localization and tracking systems G
ISO/IEC 9541-1:2012/Amd 1:2016 * Information technology — Font information interchange — Part 1: Architecture — Amendment 1 E
ISO/IEC 19788-3:2011/Amd 1:2016 * Information technology — Learning, education and training — Metadata for learning resources — Part 3: Basic application profile — Amendment 1 E
ISO/IEC 19794-6:2011/Amd 2:2016 * Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 2: XML encoding and clarification of defects XZ
ISO/IEC TR 20913:2016 * Information technology — Data centres — Guidelines on holistic investigation methodology for data centre key performance indicators C
ISO/IEC 30105-1:2016 * Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 1: Process reference model (PRM) D
ISO/IEC 30105-2:2016 * Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 2: Process assessment model (PAM) H
ISO/IEC 30105-3:2016 * Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organization maturity model (OMM) D
ISO/IEC 30105-4:2016 * Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts D
ISO/IEC 30105-5:2016 * Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 5: Guidelines F
Zobacz podobne  ISO.org – normy opublikowane w lipcu 2017 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków