Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lutym 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lutym 2015 | ISO.org – normy opublikowane w lutym 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w lutym 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w lutym 2015

Nowe normy międzynarodowe opublikowane od 1 do 28 lutego 2015

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

 

Standards published

New International Standards published between 01 February and 28 February 2015
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO 10447:2015 Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds B
ISO 14323:2015 Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds C
COPOLCO Committee on consumer policy
ISO/IEC Guide 50:2014 Safety aspects — Guidelines for child safety in standards and other specifications F
REMCO Committee on reference materials
ISO Guide 30:2015 Reference materials — Selected terms and definitions B
ISO Guide 33:2015 * Reference materials —  Good practice in using reference materials E
TC 6 Paper, board and pulps
ISO 12625-9:2015 Tissue paper and tissue products — Part 9: Determination of ball burst strength B
ISO 12625-15:2015 Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant B
ISO 12625-16:2015 Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method B
TC 10 Technical product documentation
ISO 3098-1:2015 Technical product documentation — Lettering — Part 1: General requirements B
ISO/TS 81346-10:2015 * Industrial systems, installations and equipment and industrial products — Structuring principles and reference designation — Part 10: Power plants F
TC 20 Aircraft and space vehicles
ISO 14085-1:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence A
ISO 14085-2:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning C
ISO 14085-3:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity F
ISO 14085-4:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating B
ISO 14085-5:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue B
ISO 14085-6:2015 * Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level B
TC 21 Equipment for fire protection and fire fighting
ISO 14520-12:2015 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant B
ISO 14520-14:2015 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant B
ISO 14520-15:2015 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant B
TC 23 Tractors and machinery for agriculture and forestry
ISO 13693-2:2015 * Irrigation equipment — Safety devices for chemigation — Part 2: Chemigation valve assemblies from DN 75 (3″) to DN 350 (14″) B
TC 24 Particle characterization including sieving
ISO 27891:2015 * Aerosol particle number concentration — Calibration of condensation particle counters H
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method D
TC 29 Small tools
ISO 1711-1:2015 * Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets A
ISO 1711-2:2015 * Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) A
TC 39 Machine tools
ISO 13041-5:2015 * Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations E
ISO 14137:2015 * Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy D
TC 44 Welding and allied processes
ISO 23278:2015 Non-destructive testing of welds — Magnetic particle testing — Acceptance levels A
ISO 5175:1987/Amd 1:2015 Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases and oxygen or compressed air — General specifications, requirements and tests — Amendment 1 XZ
TC 45 Rubber and rubber products
ISO 1823:2015 * Rubber hose and hose assemblies for oil suction and discharge service — Specification D
ISO 28017:2011/Amd 1:2015 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification — Amendment 1 XZ
ISO 1817:2015 * Rubber, vulcanized or thermoplastic — Determination of the effect of liquids D
ISO 23794:2015 * Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance C
TC 46 Information and documentation
ISO 11620:2014 Information and documentation — Library performance indicators H
TC 59 Buildings and civil engineering works
ISO 16745:2015 * Environmental performance of buildings — Carbon metric of a building — Use stage F
TC 61 Plastics
ISO 16396-1:2015 Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications C
ISO 19069-1:2015 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications B
TC 72 Textile machinery and accessories
ISO 93-1:2006/Amd 1:2015 * Textile machinery and accessories — Cylindrical sliver cans — Part 1: Main dimensions — Amendment 1 XZ
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 11418-5:2015 * Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies B
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 18589-3:2015 * Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry D
ISO 15651:2015 Nuclear energy — Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method A
TC 93 Starch (including derivatives and by-products)
ISO 10504:2013 Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance liquid chromatography B
TC 107 Metallic and other inorganic coatings
ISO 4528:2015 Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles B
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 1: General requirements H
ISO 10439-2:2015 Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 2: Non-integrally geared centrifugal and axial compressors G
ISO 10439-3:2015 Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 3: Integrally geared centrifugal compressors G
ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part 4: Expander-compressors G
TC 120 Leather
ISO 14931:2015 Leather — Guide to the selection of leather for apparel (excluding furs) A
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-35:2009/Cor 1:2015 * Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Technical Corrigendum 1 free
IEC 80601-2-35:2009/Cor 2:2015 * Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Technical Corrigendum 2 free
TC 126 Tobacco and tobacco products
ISO/TR 19478-1:2014 ISO and Health Canada intense smoking parameters — Part 1: Results of an international machine smoking study G
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 3459:2015 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure A
ISO 3503:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending A
ISO 13844:2015 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation A
ISO 13845:2015 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection A
TC 142 Cleaning equipment for air and other gases
ISO 15957:2015 Test dusts for evaluating air cleaning equipment B
TC 146 Air quality
ISO 25597:2013 Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution G
TC 150 Implants for surgery
ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies C
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 7439:2015 Copper-bearing contraceptive intrauterine devices — Requirements and tests B
TC 158 Analysis of gases
ISO 6141:2015 Gas analysis — Contents of certificates for calibration gas mixtures B
ISO 19229:2015 * Gas analysis — Purity analysis and the treatment of purity data B
TC 164 Mechanical testing of metals
ISO 6508-1:2015 Metallic materials — Rockwell hardness test — Part 1: Test method E
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters D
ISO 6508-3:2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks C
TC 171 Document management applications
ISO 17469-1:2015 * Document management — Strategy markup language (StratML) — Part 1: StratML core elements C
TC 172 Optics and photonics
ISO 9022-2:2015 * Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity B
ISO 9022-3:2015 * Optics and photonics — Environmental test methods — Part 3: Mechanical stress B
ISO 9022-6:2015 * Optics and photonics — Environmental test methods — Part 6: Dust A
ISO 9022-7:2015 * Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain B
ISO 9022-8:2015 * Optics and photonics — Environmental test methods — Part 8: High internal pressure, low internal pressure, immersion A
ISO 9022-20:2015 * Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide A
TC 174 Jewellery
ISO 11210:2014 Jewellery — Determination of platinum in platinum jewellery alloys — Gravimetric method after precipitation of diammonium hexachloroplatinate A
ISO 11426:2014 Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay) B
ISO 15096:2014 Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using ICP-OES A
TC 192 Gas turbines
ISO 19372:2015 * Microturbines applications — Safety H
TC 210 Quality management and corresponding general aspects for medical devices
IEC 62366-1:2015 * Medical devices — Part 1: Application of usability engineering to medical devices H
TC 228 Tourism and related services
ISO 18065:2015 * Tourism and related services — Tourist services for public use provided by Natural Protected Areas Authorities — Requirements C
TC 238 Solid biofuels
ISO 16995:2015 Solid biofuels — Determination of the water soluble chloride, sodium and potassium content B
TC 242 Energy Management
ISO 50006:2014 Energy management systems — Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) — General principles and guidance E
TC 244 Industrial furnaces and associated processing equipment
ISO 13574:2015 Industrial furnaces and associated processing equipment — Vocabulary H
TMBG Technical Management Board – groups
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards F
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17070:2015 Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content B
ISO 17228:2015 Leather — Tests for colour fastness — Change in colour with accelerated ageing B
JTC 1 Information technology
ISO/IEC 29182-7:2015 * Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 7: Interoperability guidelines B
ISO/IEC 17811-2:2015 * Information technology — Device control and management — Part 2: Specification of Device Control and Management Protocol H
ISO/IEC 33001:2015 * Information technology — Process assessment — Concepts and terminology D
ISO/IEC 33002:2015 * Information technology — Process assessment — Requirements for performing process assessment C
ISO/IEC 33003:2015 * Information technology — Process assessment — Requirements for process measurement frameworks D
ISO/IEC 33004:2015 * Information technology — Process assessment — Requirements for process reference, process assessment and maturity models B
ISO/IEC 33020:2015 * Information technology — Process assessment — Process measurement framework for assessment of process capability C
ISO/IEC TS 18661-2:2015 * Information Technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 2: Decimal floating-point arithmetic F
ISO/IEC 27039:2015 * Information technology — Security techniques — Selection, deployment and operations of intrusion detection systems (IDPS) F
ISO/IEC 15444-1:2004/Cor 3:2015 * Information technology — JPEG 2000 image coding system: Core coding system — Part 1:  — Technical Corrigendum 3 free
ISO/IEC 18000-4:2015 * Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz H
ISO/IEC 18004:2015 Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification H
ISO/IEC TR 20000-9:2015 * Information technology — Service management — Part 9: Guidance on the application of ISO/IEC 20000-1 to cloud services E
ISO/IEC 38500:2015 * Information technology — Governance of IT for the organization B
Zobacz podobne  ISO.org – normy opublikowane we wrześniu 2017 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków