Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lutym 2016 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w lutym 2016 roku | ISO.org – normy opublikowane w lutym 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w lutym 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w lutym 2016 roku

Nowe normy i standardy opublikowane w lutym 2016 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
TC 10 Technical product documentation
ISO 18388:2016 * Technical product documentation (TPD) — Relief grooves — Types and dimensioning B
TC 17 Steel
ISO 4829-2:2016 Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 % B
ISO 4938:2016 Steel and iron — Determination of nickel content — Gravimetric or titrimetric method C
ISO 4946:2016 Steel and cast iron — Determination of copper — 2,2′-Biquinoline spectrophotometric method B
ISO 17577:2016 * Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm C
TC 20 Aircraft and space vehicles
ISO 3209:2016 * Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions A
ISO 9154:2016 * Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification D
ISO 9609:2016 * Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315 degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions A
ISO 9618:2016 * Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions A
ISO 12260:2016 * Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions A
ISO 12261:2016 * Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions A
ISO 12289:2016 * Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification B
TC 22 Road vehicles
ISO 6624-2:2016 * Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron C
ISO 6624-4:2016 * Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel D
ISO 12156-1:2016 * Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method C
ISO 3917:2016 * Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering B
TC 23 Tractors and machinery for agriculture and forestry
ISO 5131:2015 Tractors for agriculture and forestry — Measurement of noise at the operator’s position — Survey method C
ISO 11001-1:2016 Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler B
TC 29 Small tools
ISO/TS 13399-204:2016 * Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming C
ISO/TS 13399-303:2016 * Cutting tool data representation and exchange
— Part 303: Creation and exchange of 3D models — Solid end mills
E
ISO/TS 13399-304:2016 * Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole E
ISO/TS 13399-307:2016 * Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts G
ISO/TS 13399-308:2016 * Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts F
ISO/TS 13399-312:2016 * Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts F
ISO/TS 13399-401:2016 * Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items E
ISO 22917:2016 Precision superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride C
ISO 16916:2016 Tools for moulding — Tool specification sheet for injection moulds B
TC 34 Food products
ISO 13904:2016 Animal feeding stuffs — Determination of tryptophan content C
ISO 6885:2016 Animal and vegetable fats and oils — Determination of anisidine value B
ISO 6886:2016 * Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test) C
ISO 27608:2010/Amd 1:2016 Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic method — Amendment 1 XZ
ISO 5495:2005/Amd 1:2016 Sensory analysis — Methodology — Paired comparison test — Amendment 1 XZ
TC 35 Paints and varnishes
ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method B
ISO 4624:2016 Paints and varnishes — Pull-off test for adhesion B
TC 37 Terminology and other language and content resources
ISO 24617-6:2016 * Language resource management — Semantic annotation framework — Part 6: Principles of semantic annotation (SemAF Principles) E
TC 39 Machine tools
ISO 230-2:2014/Amd 1:2016 Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes — Amendment 1 XZ
ISO 230-10:2016 Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of  numerically controlled machine tools F
TC 43 Acoustics
ISO 16283-3:2016 Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation F
TC 44 Welding and allied processes
ISO/TS 18166:2016 Numerical welding simulation — Execution and documentation D
ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements F
ISO 9454-1:2016 Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging B
TC 45 Rubber and rubber products
ISO 289-2:2016 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics B
ISO 18898:2016 Rubber — Calibration and verification of hardness testers D
ISO 23233:2016 Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc B
TC 46 Information and documentation
ISO 11799:2015 Information and documentation — Document storage requirements for archive and library materials B
ISO/TS 18344:2016 * Effectiveness of paper deacidification processes C
TC 58 Gas cylinders
ISO 11119-4:2016 * Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners F
TC 61 Plastics
ISO 4892-3:2016 Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps C
ISO/TR 18486:2016 * Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance B
ISO 17855-2:2016 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties B
ISO 19069-2:2016 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties B
ISO 18188:2016 Specification of polypropylene drinking straws B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 16904:2016 * Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals G
ISO 17348:2016 * Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment C
ISO 17349:2016 * Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures F
ISO 21809-3:2016 * Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings H
ISO 19901-5:2016 * Petroleum and natural gas industries — Specific requirements for offshore structures — Part 5: Weight control during engineering and construction G
TC 69 Applications of statistical methods
ISO 7870-6:2016 Control charts — Part 6: EWMA control charts D
TC 70 Internal combustion engines
ISO 4548-14:2016 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8362-5:2016 Injection containers and accessories — Part 5: Freeze drying closures for injection vials B
TC 83 Sports and other recreational facilities and equipment
ISO 20187:2016 * Inflatable play equipment — Safety requirements and test methods F
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 11665-9:2016 Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials F
ISO 16637:2016 * Radiological protection — Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources E
TC 92 Fire safety
ISO 9705-1:2016 Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration F
TC 94 Personal safety — Protective clothing and equipment
ISO 17491-4:2008/Amd 1:2016 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1 XZ
TC 96 Cranes
ISO 8566-2:2016 Cranes — Cabins and control stations — Part 2: Mobile cranes A
ISO 9926-3:2016 Cranes — Training of operators — Part 3: Tower cranes A
TC 102 Iron ore and direct reduced iron
ISO/TR 18336:2016 * Guidelines for good XRF laboratory practice for the iron ore industry E
TC 106 Dentistry
ISO 9693-2:2016 Dentistry — Compatibility testing — Part 2: Ceramic-ceramic systems B
TC 107 Metallic and other inorganic coatings
ISO 11177:2016 Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing A
ISO 18555:2016 * Metallic and other inorganic coatings — Determination of thermal conductivity of thermal barrier coatings C
ISO 28721-5:2016 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 5: Presentation and characterization of defects C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity C
ISO 16063-21:2003/Amd 1:2016 * Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 1 XZ
ISO 14835-1:2016 Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature B
TC 110 Industrial trucks
ISO 10896-2:2016 * Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks F
TC 113 Hydrometry
ISO/TR 21414:2016 * Hydrometry — Groundwater — Surface geophysical surveys for hydrogeological purposes G
TC 119 Powder metallurgy
ISO 4499-3:2016 * Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals D
ISO 4499-4:2016 * Hardmetals — Metallographic determination of microstructure — Part 4: Characterisation of porosity, carbon defects and eta-phase content B
TC 121 Anaesthetic and respiratory equipment
ISO 5360:2016 Anaesthetic vaporizers — Agent-specific filling systems D
ISO 80601-2-13:2011/Amd 1:2015 Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1 XZ
ISO 14408:2016 Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information B
ISO 7396-1:2016 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum H
ISO 11197:2016 Medical supply units D
TC 131 Fluid power systems
ISO 15171-2:2016 Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: Coupling with M16 x 2 end for connection under pressure B
TC 135 Non-destructive testing
ISO 12707:2016 Non-destructive testing — Magnetic particle testing — Vocabulary A
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 8639:2016 * Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test  methods for leaktightness and proof of structural design of flexible joints B
TC 147 Water quality
ISO 19827:2016 * Water quality — Determination of the acute toxicity to the freshwater rotifer Brachionus calyciflorus C
TC 159 Ergonomics
ISO 9241-161:2016 Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements G
ISO 9241-391:2016 Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures C
TC 160 Glass in building
ISO 1288-1:2016 * Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass C
ISO 1288-2:2016 * Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas C
ISO 1288-3:2016 * Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending) B
ISO 1288-4:2016 * Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass B
ISO 1288-5:2016 * Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas B
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23551-8:2016 * Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls B
TC 172 Optics and photonics
ISO 14490-3:2016 * Optics and photonics — Test methods for telescopic systems — Part 3: Test methods for telescopic sights C
ISO 11145:2016 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols D
TC 181 Safety of toys
ISO/TR 8124-8:2016 * Safety of toys — Part 8: Age determination guidelines F
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 10378:2016 * Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method F
TC 184 Automation systems and integration
ISO 10303-21:2016 * Industrial automation systems and integration — Product data representation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure A
TC 188 Small craft
ISO 11592-1:2016 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m B
TC 190 Soil quality
ISO 15009:2016 Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption D
ISO 17586:2016 Soil quality — Extraction of trace elements using dilute nitric acid C
ISO 22155:2016 Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method D
TC 194 Biological and clinical evaluation of medical devices
ISO 22442-1:2015 Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk management E
ISO 22442-2:2015 Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling C
TC 198 Sterilization of health care products
ISO 15883-7:2016 * Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment E
TC 204 Intelligent transport systems
ISO 14296:2016 * Intelligent transport systems — Extension of map database specifications for applications of cooperative ITS H
TC 207 Environmental management
ISO 14004:2016 Environmental management systems — General guidelines on implementation G
TC 210 Quality management and corresponding general aspects for medical devices
ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes F
TC 217 Cosmetics
ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients B
TC 218 Timber
ISO 8903:2016 * Broadleaved sawn timber — Nominal sizes A
TC 261 Additive manufacturing
ISO/ASTM 52915:2016 Specification for Additive Manufacturing File Format (AMF) Version 1.2 D
TC 299 Robots and robotic devices
ISO/TS 15066:2016 * Robots and robotic devices — Collaborative robots E
TMBG Technical Management Board – groups
ISO/IEC 80079-38:2016 * Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines H
ISO/IEC 80079-20-2:2016 * Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 2417:2016 Leather — Physical and mechanical tests — Determination of the static absorption of water A
ISO 2589:2016 Leather — Physical and mechanical tests — Determination of thickness A
ISO 3377-2:2016 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear A
ISO 17229:2016 Leather — Physical and mechanical tests — Determination of water vapour absorption A
ISO 17236:2016 Leather — Physical and mechanical tests — Determination of extension set A
ISO 19070:2016 Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather A
ISO 19071:2016 Leather — Chemical tests — Determination of chromium (VI) and the reductive potential for chromium tanning agents A
JTC 1 Information technology
ISO/IEC 14651:2016 * Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering F
ISO/IEC/IEEE 8802-1X:2013/Amd 1:2016 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 1:  MAC security key agreement protocol (MKA) extensions H
ISO/IEC 14543-3-11:2016 * Information technology — Home electronic system (HES) — Part 3-11: Frequency Modulated Wireless Short-Packet (FMWSP) protocol optimised for energy harvesting — Architecture and lower layer protocols D
ISO/IEC 27000:2016 * Information technology — Security techniques — Information security management systems — Overview and vocabulary E
ISO/IEC 28360:2015 * Information technology — Office equipment — Determination of chemical emission rates from electronic equipment F
ISO/IEC 28360:2015/Cor 1:2016 * Information technology — Office equipment — Determination of chemical emission rates from electronic equipment — Technical Corrigendum 1 free
ISO/IEC 23001-7:2016 * Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base media file format files D
ISO/IEC 15418:2016 * Information technology — Automatic identification and data capture techniques — GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance A
ISO/IEC 19762:2016 * Information technology —  Automatic identification and data capture  (AIDC) techniques — Harmonized vocabulary H

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków