IKMJ |ISO.org – normy opublikowane w lutym 2018 roku | | IKMJ | IKMJ |ISO.org – normy opublikowane w lutym 2018 roku | ISO.org – normy opublikowane w lutym 2018 roku – IKMJ | ISO.org – normy opublikowane w lutym 2018 roku – IKMJ |
Nowa norma ISO

ISO.org – normy opublikowane w lutym 2018 roku

Nowe normy i standardy opublikowane w lutym 2018 roku:
* Dostępne tylko w języku angielskim
** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
REMCO   Committee on reference materials
ISO Guide 35:2017 Reference materials — Guidance for characterization and assessment of homogeneity and stability H
TC 4   Rolling bearings
ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values D
ISO 15312:2018 Rolling bearings — Thermal speed rating — Calculation C
TC 8   Ships and marine technology
ISO 20233-1:2018 * Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 1: Source level estimation C
ISO 21984:2018 * Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships B
TC 10   Technical product documentation
ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles G
TC 17   Steel
ISO 4885:2018 Ferrous materials — Heat treatments — Vocabulary A
ISO 9328-1:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements C
ISO 9328-2:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties E
ISO 9328-3:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized D
ISO 9328-4:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties C
ISO 9328-5:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled C
ISO 9328-6:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered C
ISO 9328-7:2018 * Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels G
ISO 15461:2018 * Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests D
TC 20   Aircraft and space vehicles
ISO 1464:2018 * Aerospace — Tripod jacks — Clearance dimensions A
ISO 11532:2018 Aircraft ground equipment — Graphical symbols F
ISO 20892:2018 * Space systems — Launch complexes modernization process — General requirements B
ISO 23038:2018 * Space systems — Space solar cells — Electron and proton irradiation test methods B
TC 22   Road vehicles
ISO 15118-1:2013 * Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-case definition G
ISO 15118-8:2018 * Road vehicles — Vehicle to grid communication interface — Part 8: Physical layer and data link layer requirements for wireless communication E
ISO 22901-3:2018 * Road vehicles — Open diagnostic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD) H
ISO 12345:2013 * Diesel engines — Cleanliness assessment of fuel injection equipment F
ISO 14469:2017 Road vehicles — Compressed natural gas (CNG) refuelling connector F
TC 23   Tractors and machinery for agriculture and forestry
ISO 789-1:2018 * Agricultural tractors — Test procedures — Part 1: Power tests for power take-off B
ISO 789-2:2018 * Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity B
ISO 789-9:2018 * Agricultural tractors — Test procedures — Part 9: Power tests for drawbar B
ISO 789-13:2018 * Agricultural tractors — Test procedures — Part 13: Vocabulary and specimen test report F
ISO 4254-5:2018 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines C
ISO 13772:2018 Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance B
ISO 14223-3:2018 * Radiofrequency identification of animals — Advanced transponders — Part 3: Applications E
TC 27   Solid mineral fuels
ISO 18894:2018 * Coke — Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) D
TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method D
ISO/TR 19441:2018 * Petroleum products — Density versus temperature relationships of current fuels, biofuels and biofuel components G
TC 29   Small tools
ISO/TS 13399-70:2016 Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout F
ISO 1703:2018 Assembly tools for screws and nuts — Nomenclature F
TC 31   Tyres, rims and valves
ISO 18804:2017 Rims for agricultural, forestry and construction machines E
ISO 18805:2017 Tyre classification — Agricultural, forestry and construction machines A
TC 34   Food products
ISO 19660:2018 Cream — Determination of fat content — Acido-butyrometric method C
ISO 19662:2018 Milk — Determination of fat content — Acido-butyrometric (Gerber method) C
ISO 11133:2014/Amd 1:2018 Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media — Amendment 1 XZ
ISO 18363-3:2017 Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol C
TC 35   Paints and varnishes
ISO 12944-1:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction B
ISO 12944-2:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments B
ISO 12944-3:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations C
ISO 12944-4:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation D
ISO 12944-5:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems D
TC 36   Cinematography
ISO 2910:2018 * Cinematography — Screen luminance and chrominance for the projection of film motion pictures A
ISO 17266:2018 * Cinematography — Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives — Position and width dimensions B
TC 37   Language and terminology
ISO 24615-2:2018 * Language resource management — Syntactic annotation framework (SynAF) — Part 2: XML serialization (Tiger vocabulary) B
TC 41   Pulleys and belts (including veebelts)
ISO 20238:2018 Conveyor belts — Drum friction testing B
TC 43   Acoustics
ISO 3743-2:2018 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms F
ISO 10844:2014 * Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres F
ISO 11819-2:2017 Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method G
TC 44   Welding and allied processes
ISO 11666:2018 Non-destructive testing of welds — Ultrasonic testing — Acceptance levels C
ISO 21904-3:2018 Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices D
TC 45   Rubber and rubber products
ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification C
ISO 5435:2017 Rubber compounding ingredients — Carbon black — Determination of tinting strength C
ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion B
TC 46 Information and documentation
ISO 23081-1:2017 Information and documentation — Records management processes — Metadata for records — Part 1: Principles D
TC 58   Gas cylinders
ISO 5145:2017 Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning E
ISO 10297:2014 * Gas cylinders — Cylinder valves — Specification and type testing F
ISO 10298:2018 * Gas cylinders — Gases and gas mixtures — Determination of toxicity for the selection of cylinder valve outlets C
ISO 20475:2018 * Gas cylinders — Cylinder bundles — Periodic inspection and testing B
TC 61   Plastics
ISO 10364:2015 Structural adhesives — Determination of the pot life (working life) of multi-component adhesives B
TC 67   Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 13623:2017 Petroleum and natural gas industries — Pipeline transportation systems H
ISO 16440:2016 Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines F
ISO 19905-3:2017 Petroleum and natural gas industries  — Site-specific assessment of mobile offshore units — Part 3: Floating unit D
TC 70   Internal combustion engines
ISO 2710-1:2017 Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation A
ISO 8528-1:2018 Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance C
TC 79   Light metals and their alloys
ISO 7668:2018 * Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees C
ISO 10215:2018 Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method B
TC 81   Common names for pesticides and other agrochemicals
ISO 1750:1981/Amd 6:2018 * Pesticides and other agrochemicals — Common names — Amendment 6: Meptyldinocap XZ
TC 83   Sports and other recreational facilities and equipment
ISO 20380:2017 Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods C
TC 85   Nuclear energy, nuclear technologies, and radiological protection
ISO 12749-5:2018 * Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors A
ISO 7503-1:2016 * Measurement of radioactivity — Measurement and evaluation of surface contamination — Part 1: General principles D
ISO 7503-3:2016 * Measurement of radioactivity — Measurement and evaluation of surface contamination — Part 3: Apparatus calibration G
ISO 1709:2018 * Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing B
ISO 18229:2018 * Essential technical requirements for mechanical components and metallic structures foreseen for Generation IV nuclear reactors E
TC 89   Wood-based panels
ISO 16893:2016 * Wood-based panels — Particleboard C
TC 106   Dentistry
ISO/TS 16506:2017 Dentistry — Polymer-based luting materials containing adhesive components F
ISO 19023:2018 Dentistry — Orthodontic anchor screws A
ISO 7492:2018 Dentistry — Dental explorer B
ISO 13897:2018 Dentistry — Dental amalgam reusable mixing-capsules B
TC 107   Metallic and other inorganic coatings
ISO 2081:2018 Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel B
TC 108   Mechanical vibration, shock and condition monitoring
ISO 18095:2018 Condition monitoring and diagnostics of power transformers F
TC 118   Compressors and pneumatic tools, machines and equipment
ISO 8573-2:2018 Compressed air — Contaminant measurement — Part 2: Oil aerosol content F
TC 121   Anaesthetic and respiratory equipment
ISO 80601-2-55:2018 Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors G
ISO 80601-2-61:2017 Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment H
ISO 10524-1:2018 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices E
ISO 10524-2:2018 Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators E
TC 131   Fluid power systems
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 D
TC 138   Plastics pipes, fittings and valves for the transport of fluids
ISO 11296-1:2018 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General C
ISO 11297-1:2018 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General C
ISO 11298-1:2018 Plastics piping systems for renovation of underground water supply networks — Part 1: General C
TC 147   Water quality
ISO 20227:2017 Water quality — Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture independent microbiotest B
TC 150   Implants for surgery
ISO 17327-1:2018 * Non-active surgical implants — Implant coating — Part 1: General requirements C
TC 156   Corrosion of metals and alloys
ISO 19097-1:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete C
ISO 19097-2:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters B
TC 157   Non-systemic contraceptives and STI barrier prophylactics
ISO 11249:2018 * Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies D
TC 163   Thermal performance and energy use in the built environment
ISO 18523-2:2018 * Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 2: Residential buildings E
TC 164   Mechanical testing of metals
ISO 7500-1:2018 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system C
ISO 6507-4:2018 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values H
TC 172   Optics and photonics
ISO 17123-5:2018 * Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 5: Total stations E
TC 174   Jewellery and precious metals
ISO 8654:2018 * Jewellery — Colours of gold alloys — Definition, range of colours and designation B
TC 182   Geotechnics
ISO 17892-8:2018 * Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test C
ISO 17892-9:2018 * Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils D
TC 183   Copper, lead, zinc and nickel ores and concentrates
ISO 10258:2018 * Copper sulfide concentrates — Determination of copper content — Titrimetric methods D
TC 186   Cutlery and table and decorative metal hollow-ware
ISO 8442-9:2018 * Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 9: Requirements for ceramic knives B
TC 188   Small craft
ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention B
TC 189   Ceramic tile
ISO 10545-3:2018 Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density B
TC 190   Soil quality
ISO 11508:2017 Soil quality — Determination of particle density B
TC 198   Sterilization of health care products
ISO 11138-1:2017 Sterilization of health care products — Biological indicators — Part 1: General requirements F
TC 201   Surface chemical analysis
ISO/TR 19693:2018 * Surface chemical analysis — Characterization of functional glass substrates for biosensing applications E
TC 204   Intelligent transport systems
ISO 16410-1:2017 Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-3 — Part 1: Test suite structure and test purposes H
TC 206   Fine ceramics
ISO 20379:2018 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer B
TC 207   Environmental management
ISO 14024:2018 Environmental labels and declarations — Type I environmental labelling — Principles and procedures C
TC 211   Geographic information/Geomatics
ISO 19115-1:2014/Amd 1:2018 Geographic information — Metadata — Part 1: Fundamentals — Amendment 1 XZ
ISO 19160-4:2017 Addressing — Part 4: International postal address components and template language G
TC 212   Clinical laboratory testing and in vitro diagnostic test systems
ISO 15189:2012 * Medical laboratories — Requirements for quality and competence G
TC 215   Health informatics
ISO/IEEE 11073-10427:2018 * Health informatics — Personal health device communication — Part 10427: Device specialization — Power status monitor of personal health devices G
TC 216   Footwear
ISO 18454:2018 Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear A
TC 217   Cosmetics
ISO/TR 18811:2018 Cosmetics — Guidelines on the stability testing of cosmetic products C
TC 218   Timber
ISO 13061-10:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 10: Determination of impact bending strength A
ISO 13061-11:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 11: Determination of resistance to impact indentation A
ISO 13061-12:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 12: Determination of static hardness A
ISO 13061-17:2017 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 17: Determination of ultimate stress in compression parallel to grain A
ISO 19474:2018 * Round timber — Visual characteristics — Methods of determination B
TC 219 Floor coverings
ISO 19322:2018 * Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers C
TC 220   Cryogenic vessels
ISO 21029-1:2018 * Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests H
TC 226   Materials for the production of primary aluminium
ISO 12984:2018 * Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution A
TC 255   Biogas
ISO 20675:2018 * Biogas — Biogas production, conditioning, upgrading and utilization — Terms, definitions and classification scheme D
TC 256   Pigments, dyestuffs and extenders
ISO 23900-1:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 1: General introduction A
ISO 23900-2:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling B
ISO 23900-3:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling A
ISO 23900-4:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling A
ISO 23900-5:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 5: Determination by filter pressure value test B
ISO 23900-6:2015 Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 6: Determination by film test B
TC 262   Risk management
ISO 31000:2018 Risk management — Guidelines C
TC 282   Water reuse
ISO 20760-1:2018 Water reuse in urban areas — Guidelines for centralized water reuse system — Part 1: Design principle of a centralized water reuse system D
ISO 20760-2:2017 Water reuse in urban areas — Guidelines for centralized water reuse system — Part 2: Management of a centralized water reuse system B
TC 292   Security and resilience
ISO 22300:2018 Security and resilience — Vocabulary A
IULTCS   International Union of Leather Technologists and Chemists Societies
ISO 4098:2018 Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter A
JTC 1   Information technology
ISO/IEC 20243-1:2018 * Information technology — Open Trusted Technology ProviderTM Standard (O-TTPS) — Mitigating maliciously tainted and counterfeit products — Part 1: Requirements and recommendations E
ISO/IEC TR 20547-5:2018 * Information technology — Big data reference architecture — Part 5: Standards roadmap C
ISO/IEC 17839-2:2015 * Information technology — Biometric System-on-Card — Part 2: Physical characteristics A
ISO/IEC TR 11801-9905:2018 * Information technology — Generic cabling systems for customer premises — Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application E
ISO/IEC 14763-4:2018 * Information technology — Implementation and operation of customer premises cabling — Part 4: Measurement of end-to-end (E2E)-Links B
ISO/IEC 27000:2018 Information technology — Security techniques — Information security management systems — Overview and vocabulary E
ISO/IEC TR 27103:2018 * Information technology — Security techniques — Cybersecurity and ISO and IEC Standards D
ISO/IEC TR 21565:2018 * Information technology — Office equipment — Viewing environment guideline for office equipment C
ISO/IEC 14496-12:2015/Amd 2:2018 * Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 2: Support for image file format XZ
ISO/IEC 14496-15:2017/Amd 1:2018 * Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format — Amendment 1: Handling of unspecified NAL unit types and other improvements XZ
ISO/IEC 15938-14:2018 * Information technology — Multimedia content description interface — Part 14: Reference software, conformance and usage guidelines for compact descriptors for visual search C
ISO/IEC 21277:2018 * Information technology — Radio frequency identification device performance test methods — Crypto suite B
ISO/IEC 19794-13:2018 * Information technology — Biometric data interchange formats — Part 13: Voice data D
ISO/IEC 30140-1:2018 * Information technology — Underwater acoustic sensor network (UWASN) — Part 1: Overview and requirements F
Zobacz podobne  ISO.org – normy opublikowane we wrześniu 2018 roku

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków