IKMJ » ISO.org – normy opublikowane w maju 2015 IKMJISO.org – normy opublikowane w maju 2015 | ISO.org – normy opublikowane w maju 2015 – IKMJ ISO.org – normy opublikowane w maju 2015 – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w maju 2015

Nowe normy i standardy opublikowane w maju 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grupa Cenowa
JPC 2 Joint Project Committee – Energy efficiency and renewable energy sources – Common terminology
ISO/IEC 13273-1:2015 Energy efficiency and renewable energy sources — Common international terminology — Part 1: Energy efficiency C
ISO/IEC 13273-2:2015 Energy efficiency and renewable energy sources — Common international terminology — Part 2: Renewable energy sources B
REMCO Committee on reference materials
ISO Guide 33:2015 Reference materials —  Good practice in using reference materials E
TC 6 Paper, board and pulps
ISO 2144:2015 Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C A
ISO 5636-6:2015 * Paper and board — Determination of air permeance (medium range) — Part 6: Oken method C
TC 8 Ships and marine technology
ISO 29400:2015 * Ships and marine technology — Offshore wind energy — Port and marine operations H
TC 20 Aircraft and space vehicles
ISO 18197:2015 * Space systems — Space based services requirements for centimetre class positioning E
TC 22 Road vehicles
ISO 15118-3:2015 * Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements G
ISO 18541-1:2014 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition F
ISO 18541-2:2014 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements E
ISO 18541-3:2014 Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements C
ISO 17447-1:2015 * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs C
ISO 17447-2:2015 * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs B
ISO 17447-3:2015 * Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements A
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 16861:2015 Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME) A
TC 29 Small tools
ISO 9138:2015 Abrasive grains — Sampling and splitting A
ISO 2725-1:2015 Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets B
ISO 2725-2:2015 Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets („impact”) B
ISO 2725-3:2015 Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets („non-impact”) A
ISO 7738:2015 Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads A
TC 33 Refractories
ISO 16835:2014 Refractory products — Determination of thermal expansion F
ISO 22016:2015 * Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods C
TC 34 Food products
ISO 6647-1:2015 Rice — Determination of amylose content — Part 1: Reference method B
ISO 6647-2:2015 Rice — Determination of amylose content — Part 2: Routine methods B
ISO 16649-3:2015 Microbiology of the food chain — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide B
ISO 12228-1:2014 Determination of individual and total sterols contents — Gas chromatographic method — Part 1: Animal and vegetable fats and oils D
ISO/TR 17623:2015 Molecular biomarker analysis — SSR analysis of maize A
TC 35 Paints and varnishes
ISO 3233-3:2015 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material C
TC 38 Textiles
ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method C
ISO 18067:2015 * Textiles — Synthetic filament yarns — Determination of shrinkage in dry-hot air (after treatment) B
TC 39 Machine tools
ISO 230-7:2015 * Test code for machine tools — Part 7: Geometric accuracy of axes of rotation G
ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy D
TC 43 Acoustics
ISO 1683:2015 Acoustics — Preferred reference values for acoustical and vibratory levels A
ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories G
ISO 9295:2015 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment C
ISO 17534-1:2015 Acoustics — Software for the calculation of sound outdoors — Part 1: Quality requirements and quality assurance D
TC 44 Welding and allied processes
ISO/TR 18491:2015 Welding and allied processes — Guidelines for measurement of welding energies B
TC 45 Rubber and rubber products
ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids D
ISO 19051:2015 * Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content by Micro Dumas combustion method B
ISO 2005:2014 Rubber latex, natural, concentrate — Determination of sludge content A
ISO 5794-2:2014 Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber A
TC 46 Information and documentation
ISO 10160:2015 * Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition G
ISO 17316:2015 * Information and documentation — International standard link identifier (ISLI) B
TC 54 Essential oils
ISO 18321:2015 * Essential oils — Determination of peroxide value A
TC 58 Gas cylinders
ISO 13341:2010/Amd 1:2015 Gas cylinders — Fitting of valves to gas cylinders — Amendment 1 XZ
TC 59 Buildings and civil engineering works
ISO 12006-2:2015 * Building construction — Organization of information about construction works — Part 2: Framework for classification D
TC 61 Plastics
ISO 16620-2:2015 Plastics — Biobased content — Part 2: Determination of biobased carbon content D
ISO 16620-3:2015 Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 15551-1:2015 * Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift H
ISO 11960:2014 Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells H
ISO 19901-3:2014 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure H
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-12:2015 * Testing of concrete — Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method B
ISO 16711:2015 * Seismic assessment and retrofit of concrete structures C
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 18589-2:2015 Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples D
ISO 18589-3:2015 Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry D
TC 87 Cork
ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging A
TC 91 Surface active agents
ISO 17280:2015 * Surface active agents — Determination of 1,4-dioxan residues in surfactants obtained from epoxyethane by gas chromatography B
TC 94 Personal safety — Protective clothing and equipment
ISO 16900-8:2015 Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement of RPD air flow rates of assisted filtering RPD C
ISO/TS 16976-2:2015 Respiratory protective devices — Human factors — Part 2: Anthropometrics D
TC 96 Cranes
ISO 9942-1:2015 Cranes — Information labels — Part 1: General A
ISO 17440:2014 Cranes — General design — Limit states and proof of competence of forged steel hooks G
TC 106 Dentistry
ISO/TS 11405:2015 Dentistry — Testing of adhesion to tooth structure B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 18649:2004 Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges D
ISO 20283-3:2006 Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment D
ISO 14835-1:2005 Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature B
ISO 14835-2:2005 Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure C
ISO 13379-2:2015 Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications B
ISO 18129:2015 Condition monitoring and diagnostics of machines — Approaches for performance diagnosis C
ISO 18436-2:2014 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics F
TC 131 Fluid power systems
ISO 3723:2015 Hydraulic fluid power — Filter elements — Method for end load test A
TC 134 Fertilizers and soil conditioners
ISO 17319:2015 * Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potassium tetraphenylborate gravimetric method D
TC 135 Non-destructive testing
ISO 18490:2015 Non-destructive testing — Evaluation of vision acuity of NDT personnel B
TC 145 Graphical symbols
ISO 7001:2007/Amd 2:2015 Graphical symbols — Public information symbols — Amendment 2 XZ
ISO 7010:2011/Amd 6:2014 Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6 XZ
TC 146 Air quality
ISO 19289:2015 Air quality — Meteorology — Siting classifications for surface observing stations on land C
TC 149 Cycles
ISO 6742-1:2015 * Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices C
ISO 6742-2:2015 * Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices C
ISO 6742-3:2015 * Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices B
ISO 6742-4:2015 * Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle’s movement C
ISO 6742-5:2015 * Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle’s movement A
TC 150 Implants for surgery
ISO 16061:2015 Instrumentation for use in association with non-active surgical implants — General requirements D
ISO 13958:2014 Concentrates for haemodialysis and related therapies D
ISO 13959:2014 Water for haemodialysis and related therapies C
ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies H
ISO 26722:2014 Water treatment equipment for haemodialysis applications and related therapies E
TC 156 Corrosion of metals and alloys
ISO 16701:2015 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution C
TC 158 Analysis of gases
ISO 7504:2015 Gas analysis — Vocabulary C
ISO 19229:2015 Gas analysis — Purity analysis and the treatment of purity data B
TC 159 Ergonomics
ISO 9241-392:2015 Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images E
TC 171 Document management applications
ISO 12651-2:2014 Electronic document management — Vocabulary — Part 2: Workflow management B
TC 182 Geotechnics
ISO 18674-1:2015 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 1: General rules E
TC 184 Automation systems and integration
ISO/TS 15926-11:2015 * Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data G
TC 188 Small craft
ISO 10240:2004/Amd 1:2015 Small craft — Owner’s manual — Amendment 1 XZ
TC 190 Soil quality
ISO 11074:2015 * Soil quality — Vocabulary A
ISO/TS 17182:2014 Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection C
TC 199 Safety of machinery
ISO/TR 22100-1:2015 * Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards C
TC 204 Intelligent transport systems
ISO/TR 17185-3:2015 * Intelligent transport systems — Public transport user information — Part 3: Use cases for journey planning systems and their interoperation F
ISO/TS 18750:2015 * Intelligent transport systems — Cooperative systems — Definition of a global concept for Local Dynamic Maps G
TC 205 Building environment design
ISO 11855-2:2012 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity G
ISO 11855-3:2012 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning C
ISO 11855-4:2012 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) G
ISO 11855-5:2012 Building environment design — Design , dimensioning, installation and control of embedded radiant heating and cooling systems — Part 5: Installation B
ISO 16484-6:2014 Building automation and control systems (BACS) — Part 6: Data communication conformance testing H
TC 206 Fine ceramics
ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings B
TC 210 Quality management and corresponding general aspects for medical devices
ISO 80369-20:2015 Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods E
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-40:2015 Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts C
ISO 16610-49:2015 Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques C
TC 215 Health informatics
ISO/TR 12310:2015 * Health informatics — Principles and guidelines for the measurement of conformance in the implementation of terminological systems E
ISO/TS 18790-1:2015 * Health informatics — Profiling framework and classification for Traditional Medicine informatics standards development — Part 1: Traditional Chinese Medicine B
TC 219 Floor coverings
ISO 16906:2015 * Resilient floor coverings — Determination of seam strength A
TC 221 Geosynthetics
ISO 10319:2015 Geosynthetics — Wide-width tensile test C
TC 226 Materials for the production of primary aluminium
ISO 15379-1:2015 * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure A
ISO 15379-2:2015 * Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expansion due to sodium penetration without application of pressure A
TC 228 Tourism and related services
ISO 13009:2015 Tourism and related services — Requirements and recommendations for beach operation E
ISO 13810:2015 * Tourism services — Industrial tourism — Service provision C
ISO 18065:2015 Tourism and related services — Tourist services for public use provided by Natural Protected Areas Authorities — Requirements C
TC 229 Nanotechnologies
IEC/TS 62607-2-1:2015 * Nanomanufacturing – key control characteristics for CNT film applications – Resistivity — Part 2-1: B
TC 238 Solid biofuels
ISO 16948:2015 Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen B
ISO 16968:2015 Solid biofuels — Determination of minor elements B
TC 266 Biomimetics
ISO 18458:2015 * Biomimetics — Terminology, concepts and methodology D
ISO 18459:2015 * Biomimetics — Biomimetic structural optimization D
TC 268 Sustainable development in communities
ISO/TS 37151:2015 * Smart community infrastructures — Principles and requirements for performance metrics G
TC 292 Security
ISO 22322:2015 * Societal security — Emergency management — Guidelines for public warning B
CASCO Committee on conformity assessment
ISO/IEC TS 17021-6:2014 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems A
ISO/IEC TS 17021-7:2014 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road traffic safety management systems A
ISO/IEC TR 17026:2015 Conformity assessment — Example of a certification scheme for tangible products E
JTC 1 Information technology
ISO/IEC 10646:2014/Amd 1:2015 * Information technology — Universal Coded Character Set (UCS) — Amendment 1: Cherokee supplement and other characters D
ISO/IEC 8825-2:2008/Cor 3:2015 * Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2:  — Technical Corrigendum 3 free
ISO/IEC 8825-2:2008/Cor 4:2015 * Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2:  — Technical Corrigendum 4 free
ISO/IEC 15149-2:2015 * Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 2: In-band Control Protocol for Wireless Power Transfer E
ISO/IEC/IEEE 15288:2015 * Systems and software engineering — System life cycle processes H
ISO/IEC/IEEE 15289:2015 * Systems and software engineering — Content of life-cycle information items (documentation) H
ISO/IEC/IEEE 23026:2015 * Systems and software engineering — Engineering and management of websites for systems, software, and services information F
ISO/IEC/IEEE 26531:2015 * Systems and software engineering — Content management for product life-cycle, user and service management documentation F
ISO/IEC 11695-1:2015 * Identification cards — Optical memory cards — Holographic recording method — Part 1: Physical characteristics B
ISO/IEC TS 18661-2:2015 * Information Technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 2: Decimal floating-point arithmetic G
ISO/IEC TS 30104:2015 * Information Technology — Security Techniques — Physical Security Attacks, Mitigation Techniques and Security Requirements E
ISO/IEC 15444-5:2003/Amd 2:2015 * Information technology — JPEG 2000 image coding system: Reference software — Part 5:  — Amendment 2: Additional reference software XZ
ISO/IEC 23003-2:2010/Amd 1:2015 * Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 1: SAOC conformance XZ
ISO/IEC 23003-2:2010/Amd 2:2015 * Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 2: SAOC reference software XZ
ISO/IEC 23003-3:2012/Amd 2:2015 * Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2: Reference software XZ
ISO/IEC 23003-3:2012/Amd 2:2015/Cor 1:2015 * Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2: Reference software  — Technical Corrigendum 1 free
ISO/IEC 23008-2:2015 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding H
ISO/IEC 29167-10:2015 * Information technology — Automatic identification and data capture techniques — Part 10: Crypto suite AES-128 security services for air interface communications D
ISO/IEC 29167-12:2015 * Information technology — Automatic identification and data capture techniques — Part 12: Crypto suite ECC-DH security services for air interface communications F
ISO/IEC 29167-13:2015 * Information technology — Automatic identification and data capture techniques — Part 13: Crypto suite Grain-128A security services for air interface communications F
ISO/IEC 17549-2:2015 * Information technology — User interface guidelines on menu navigation — Part 2: Navigation with 4-direction devices C
ISO/IEC 19794-1:2011/Amd 2:2015 * Information technology — Biometric data interchange formats — Part 1: Framework — Amendment 2: Framework for XML encoding XZ
ISO/IEC TR 29194:2015 * Information Technology — Biometrics — Guide on designing accessible and inclusive biometric systems C
Zobacz podobne  Samokontrola – cecha prawdziwego przywódcy

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków