IKMJ » ISO.org – normy opublikowane w maju 2018 roku IKMJISO.org – normy opublikowane w maju 2018 roku | ISO.org – normy opublikowane w maju 2018 roku – IKMJ ISO.org – normy opublikowane w maju 2018 roku – IKMJ
ISO org

ISO.org – normy opublikowane w maju 2018 roku

Nowe normy i standardy opublikowane w maju 2018 roku:
* Dostępne tylko w języku angielskim
** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

 

Price group

 

TC 2 Fasteners
ISO 898-3:2018 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes

C

ISO 1891-4:2018 * Fasteners — Vocabulary — Part 4: Control, inspection, delivery, acceptance and quality

A

TC 6 Paper, board and pulps
ISO 20494:2017 Paper — Requirements for stability for general graphic applications

C

TC 8 Ships and marine technology
ISO 18079-1:2018 * Ships and marine technology — Servicing of inflatable life-saving appliances — Part 1: General

B

ISO 18079-2:2018 * Ships and marine technology — Servicing of inflatable life-saving appliances — Part 2: Inflatable life rafts

B

ISO 18079-3:2018 * Ships and marine technology — Servicing of inflatable life-saving appliances — Part 3: Inflatable lifejackets

A

ISO 18079-4:2018 * Ships and marine technology — Servicing of inflatable life-saving appliances — Part 4: Marine evacuation systems

B

ISO 18079-5:2018 * Ships and marine technology — Servicing of inflatable life-saving appliances — Part 5: Inflated rescue boats

B

TC 10 Technical product documentation
ISO 81346-12:2018 * Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 12: Construction works and building services

F

TC 17 Steel
ISO 9443:2018 Surface quality classes for hot-rolled bars and wire rod

B

ISO 17832:2018 * Non-parallel steel wire and cords for tyre reinforcement

C

ISO 19203:2018 * Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications

C

TC 20 Aircraft and space vehicles
ISO 10794:2018 * Space systems — Programme management — Material, mechanical parts and processes

F

TC 21 Equipment for fire protection and fire fighting
ISO 7240-5:2018 * Fire detection and fire alarm systems — Part 5: Point type heat detectors

E

ISO 7240-7:2018 * Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

G

ISO 7240-27:2018 * Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors

G

TC 22 Road vehicles
ISO 15118-5:2018 * Road vehicles — Vehicle to grid communication interface — Part 5: Physical layer and data link layer conformance test

H

ISO 18541-6:2018 * Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements

H

ISO 7638-1:2018 * Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage

B

ISO 7638-2:2018 * Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage

B

ISO 17840-4:2018 Road vehicles — Information for first and second responders — Part 4: Propulsion energy identification

B

ISO/TS 22239-1:2018 * Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 1: Specifications and test methods

G

ISO/TS 22239-2:2018 * Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 2: Resonator specification

G

TC 23 Tractors and machinery for agriculture and forestry
ISO 5687:2018 Equipment for harvesting — Combine harvesters — Determination and designation of grain tank capacity and unloading device performance

A

ISO 7714:2018 * Agricultural irrigation equipment — Volumetric valves — General requirements and test methods

C

TC 24 Particle characterization including sieving
ISO 21501-4:2018 * Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne particle counter for clean spaces

D

TC 25 Cast irons and pig irons
ISO 1083:2018 * Spheroidal graphite cast irons — Classification

F

TC 29 Small tools
ISO/TS 13399-80:2017 Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

E

ISO/TS 13399-201:2014 Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts

E

ISO/TS 13399-202:2015 Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts

F

ISO 3315:2018 Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests

A

ISO 3316:2018 Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests

B

TC 34 Food products
ISO 5496:2006/Amd 1:2018 Sensory analysis — Methodology — Initiation and training of assessors in the detection and recognition of odours — Amendment 1

XZ

TC 35 Paints and varnishes
ISO/TS 19392-1:2018 * Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering

B

ISO/TS 19392-2:2018 * Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm

B

ISO/TS 19392-3:2018 * Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet

B

TC 37 Language and terminology
ISO 18841:2018 Interpreting services — General requirements and recommendations

C

TC 39 Machine tools
ISO/TR 230-11:2018 Test code for machine tools — Part 11: Measuring instruments suitable for machine tool geometry tests

H

TC 41 Pulleys and belts (including veebelts)
ISO 7590:2018 Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness

B

TC 42 Photography
ISO 18944:2018 * Imaging materials — Reflection colour photographic prints — Test print construction and measurement

D

ISO/TS 19264-1:2017 * Photography — Archiving systems — Image quality analysis — Part 1: Reflective originals

G

TC 43 Acoustics
ISO 16283-2:2018 Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation

F

TC 44 Welding and allied processes
ISO 13918:2017 Welding — Studs and ceramic ferrules for arc stud welding

D

TC 45 Rubber and rubber products
ISO/TS 21522:2017 Rubber process fumes components — Quantitative test methods

A

TC 54 Essential oils
ISO 4730:2017/Amd 1:2018 * Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) — Amendment 1: Enantiomeric distribution

XZ

TC 58 Gas cylinders
ISO 18119:2018 Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing

G

TC 61 Plastics
ISO 2555:2018 Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method

C

ISO 20557-2:2018 Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties

A

ISO 20558-1:2018 * Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 20558-2:2018 * Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties

A

ISO 29862:2018 Self adhesive tapes — Determination of peel adhesion properties

C

ISO 29863:2018 Self adhesive tapes — Measurement of static shear adhesion

C

ISO 29864:2018 Self adhesive tapes — Measurement of breaking strength and elongation at break

A

ISO 30012:2016/Amd 1:2018 * Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects — Amendment 1

XZ

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 3183:2012/Amd 1:2017 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

 

— Amendment 1

XZ

ISO 10855-1:2018 * Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers

E

ISO 10855-2:2018 * Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets

C

ISO 10855-3:2018 * Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing

C

ISO 19901-4:2016 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 4: Geotechnical and foundation design considerations

H

ISO/TS 35105:2018 Petroleum and natural gas industries — Arctic operations — Material requirements for arctic operations

D

TC 69 Applications of statistical methods
ISO 39511:2018 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

E

TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 17785-2:2018 * Testing methods for pervious concrete — Part 2: Density and void content

B

ISO 18407:2018 * Simplified design of prestressed concrete tanks for potable water

H

TC 82 Mining
ISO 18758-1:2018 * Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 1: Vocabulary

A

ISO 18758-2:2018 * Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements

G

ISO 19426-1:2018 * Structures for mine shafts — Part 1: Vocabulary

A

ISO 19426-2:2018 * Structures for mine shafts — Part 2: Headframe structures

C

ISO 19426-3:2018 * Structures for mine shafts — Part 3: Sinking stages

D

ISO 19426-4:2018 * Structures for mine shafts — Part 4: Conveyances

E

ISO 19426-5:2018 * Structures for mine shafts — Part 5: Shaft system structures

F

TC 83 Sports and other recreational facilities and equipment
ISO 11088:2018 Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection

C

TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 19443:2018 * Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)

F

ISO 19226:2017 Nuclear energy — Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals

B

TC 92 Fire safety
ISO 1716:2018 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)

E

ISO/TS 19021:2018 * Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy

D

TC 94 Personal safety — Personal protective equipment
ISO 18640-1:2018 * Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat and moisture transfer with the sweating torso

F

ISO 18640-2:2018 * Protective clothing for firefighters — Physiological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters

C

TC 106 Dentistry
ISO 10637:2018 Dentistry — Central suction source equipment

C

ISO 18618:2018 Dentistry — Interoperability of CAD/CAM systems

G

TC 107 Metallic and other inorganic coatings
ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems

F

TC 112 Vacuum technology
ISO/TS 20175:2018 * Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pressure measurement

D

TC 119 Powder metallurgy
ISO 3923-1:2018 * Metallic powders — Determination of apparent density — Part 1: Funnel method

A

TC 121 Anaesthetic and respiratory equipment
ISO 10079-1:2015/Amd 1:2018 Medical suction equipment — Part 1: Electrically powered suction equipment — Amendment 1: Changes to requirements for operating at extremes of temperature

XZ

TC 131 Fluid power systems
ISO 6164:2018 Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80

C

ISO 11943:2018 * Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation

E

TC 135 Non-destructive testing
ISO 19835:2018 Non-destructive testing — Acoustic emission testing — Steel structures of overhead travelling cranes and portal bridge cranes

C

TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 10467:2018 * Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

G

ISO 10468:2018 * Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions

B

ISO 10471:2018 * Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

B

TC 147 Water quality
ISO 20950-1:2018 * Water quality — Determination of available weak and dissociable (WAD) cyanide — Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection

C

ISO 5667-3:2018 Water quality — Sampling — Part 3: Preservation and handling of water samples

G

TC 150 Implants for surgery
ISO 5910:2018 * Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices

H

ISO 14242-4:2018 Implants for surgery — Wear of total hip-joint prostheses — Part 4: Testing hip prostheses under variations in component positioning which results in direct edge loading

B

TC 156 Corrosion of metals and alloys
ISO 16151:2018 Corrosion of metals and alloys — Accelerated  cyclic test with exposure to acidified salt spray, dry and wet conditions

D

TC 163 Thermal performance and energy use in the built environment
ISO 17749:2018 * Thermal insulation products — Sheep wool mat and board — Specification

C

ISO 20310:2018 * Thermal insulation for building equipment and industrial installations — Aluminosilicate wool products — Specification

B

TC 172 Optics and photonics
ISO 19740:2018 * Optics and photonics — Optical materials and components — Test method for homogeneity of infrared optical materials

D

ISO 19741:2018 * Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials

B

ISO 19742:2018 * Optics and photonics — Optical materials and components — Test method for bubbles and inclusions in infrared optical materials

A

ISO 17915:2018 * Optics and photonics — Measurement method of semiconductor lasers for sensing

E

TC 176 Quality management and quality assurance
ISO 10006:2017 Quality management — Guidelines for quality management in projects

E

TC 182 Geotechnics
ISO 18674-2:2016 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line:  Extensometers

F

TC 184 Automation systems and integration
ISO 8000-2:2017/Amd 1:2018 * Data quality — Part 2: Vocabulary — Amendment 1

XZ

TC 188 Small craft
ISO 16147:2018 Small craft — Inboard diesel engines — Engine-mounted fuel, oil and electrical components

A

TC 190 Soil quality
ISO 11260:2018 Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution

B

ISO 23611-1:2018 Soil quality — Sampling of soil invertebrates — Part 1: Hand-sorting and extraction of earthworms

D

TC 192 Gas turbines
ISO 10494:2018 Turbines and turbine sets — Measurement of emitted airborne noise — Engineering/survey method

F

TC 204 Intelligent transport systems
ISO 13185-3:2018 * Intelligent transport systems  — Vehicle interface for provisioning and support of ITS Services — Part 3: Unified vehicle interface protocol (UVIP) server and client API specification

F

ISO 17419:2018 * Intelligent transport systems — Cooperative systems — Globally unique identification

F

ISO 17423:2018 * Intelligent transport systems — Cooperative systems — Application requirements and objectives

E

ISO 18750:2018 * Intelligent transport systems — Co-operative ITS — Local dynamic map

G

ISO 21215:2018 * Intelligent transport systems — Localized communications — ITS-M5

E

ISO 21218:2018 * Intelligent transport systems — Hybrid communications — Access technology support

G

ISO 22418:2018 * Intelligent transport systems — Fast service announcement protocol (FSAP)

G

ISO 24102-6:2018 * Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 6: Path and flow management

G

TC 207 Environmental management
ISO 14026:2017 Environmental labels and declarations — Principles, requirements and guidelines for communication of footprint information

C

TC 211 Geographic information/Geomatics
ISO 19101-2:2018 Geographic information — Reference model — Part 2: Imagery

G

ISO 19146:2018 * Geographic information — Cross-domain vocabularies

G

ISO/TS 19159-3:2018 * Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 3: SAR/InSAR

G

TC 213 Dimensional and geometrical product specifications and verification
ISO 5458:2018 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification

F

ISO/TR 23605:2018 * Technical product specification (TPS) — Application guidance — International model for national implementation

E

TC 215 Health informatics
ISO/TS 20405:2018 * Health informatics — Framework of event data and reporting definitions for the safety of health software

C

TC 218 Timber
ISO 19474:2018 Round timber — Visual characteristics — Methods of determination

B

TC 219 Floor coverings
ISO 10582:2017 Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications

C

TC 221 Geosynthetics
ISO 10318-1:2015/Amd 1:2018 Geosynthetics — Part 1: Terms and definitions — Amendment 1

XZ

ISO 10318-2:2015/Amd 1:2018 Geosynthetics — Part 2: Symbols and pictograms — Amendment 1

XZ

TC 224 Service activities relating to drinking water supply wastewater and stormwater systems
ISO/TR 24514:2018 * Activities relating to drinking water and wastewater services — Examples of the use of performance indicators using ISO 24510, ISO 24511 and ISO 24512 and related methodologies

G

TC 226 Materials for the production of primary aluminium
ISO 12985-1:2018 * Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method

A

ISO 12985-2:2018 * Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method

A

TC 229 Nanotechnologies
ISO/TS 21362:2018 * Nanotechnologies — Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation

F

TC 244 Industrial furnaces and associated processing equipment
ISO 13578:2017 Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces

E

TC 255 Biogas
ISO 20675:2018 Biogas — Biogas production, conditioning, upgrading and utilization — Terms, definitions and classification scheme

D

TC 258 Project, programme and portfolio management
ISO 21511:2018 Work breakdown structures for project and programme management

D

TC 282 Water reuse
ISO 20426:2018 Guidelines for health risk assessment and management for non-potable water reuse

D

TC 292 Security and resilience
ISO/TS 22330:2018 * Security and resilience — Business continuity management systems — Guidelines for people aspects of business continuity

F

TC 299 Robotics
ISO/TR 20218-2:2017 * Robotics — Safety design for industrial robot systems — Part 2: Manual load/unload stations

C

IULTCS International Union of Leather Technologists and Chemists Societies
ISO 4045:2018 Leather — Chemical tests —  Determination of pH and difference figure

A

ISO 10195:2018 Leather — Chemical determination of chromium(VI) content in leather — Thermal pre-ageing of leather and determination of hexavalent chromium

A

JTC 1 Information technology
ISO/IEC 22275:2018 * Information technology — Programming languages, their environments, and system software interfaces — ECMAScript® Specification Suite

A

ISO/IEC/IEEE 8802-11:2018 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications

H

ISO/IEC 8824-3:2015/Cor 1:2018 * Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification — Part 3:  — Technical Corrigendum 1

free

ISO/IEC 8825-4:2015/Cor 1:2018 * Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:  — Technical Corrigendum 1

free

ISO/IEC 7816-15:2016/Amd 1:2018 * Identification cards — Integrated circuit cards — Part 15: Cryptographic information application — Amendment 1

XZ

ISO/IEC TS 21544:2018 * Programming languages — Extensions to C++ for modules

E

ISO/IEC TS 20540:2018 * Information technology — Security techniques — Testing cryptographic modules in their operational environment

F

ISO/IEC 27034-3:2018 * Information technology — Application security — Part 3: Application security management process

F

ISO/IEC 27034-7:2018 * Information technology — Application security — Part 7: Assurance prediction framework

E

ISO/IEC TS 27034-5-1:2018 * Information technology — Application security — Part 5-1: Protocols and application security controls data structure, XML schemas

G

ISO/IEC 13818-1:2018/Amd 1:2018 * Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 1: Ultra-low latency and 4k and higher resolution support for transport of JPEG 2000 video

XZ

ISO/IEC 21000-19:2010/Amd 1:2018 * Information technology — Multimedia framework (MPEG-21) — Part 19: Media Value Chain Ontology — Amendment 1: Extensions on time-segments and multi-track audio

D

ISO/IEC 23000-18:2018 * Information technology — Multimedia application formats (MPEG-A) — Part 18: Media linking application format

G

ISO/IEC 23006-1:2018 * Information technology — Multimedia service platform technologies — Part 1: Architecture

D

ISO/IEC TR 29196:2018 * Information technology — Guidance for biometric enrolment

G

ISO/IEC TR 38505-2:2018 * Information technology — Governance of IT — Governance of data — Part 2: Implications of ISO/IEC 38505-1 for data management

F

 

Zobacz podobne  ISO.org – normy opublikowane w lipcu 2018 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków