Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w marcu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w marcu 2015 | ISO.org – normy opublikowane w marcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w marcu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w marcu 2015

Nowe normy i standardy opublikowane w marcu 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grupa cenowa
IIW International Institute of Welding
ISO 14373:2015 Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels C
TC 8 Ships and marine technology
ISO 28007-1:2015 * Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General D
ISO 9876:2015 * Ships and marine technology — Marine facsimile receivers for meteorological charts B
ISO 15016:2015 * Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data H
ISO 22554:2015 * Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type B
ISO 17941:2015 * Ships and marine technology — Hydraulic hinged watertight fireproof doors B
TC 17 Steel
ISO 16573:2015 * Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels B
ISO 16124:2015 Steel wire rod — Dimensions and tolerances B
TC 20 Aircraft and space vehicles
ISO 16694:2015 * Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines C
TC 22 Road vehicles
ISO 8820-5:2015 * Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures C
ISO 8820-10:2015 * Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high current miniature) B
ISO 6621-4:2015 * Internal combustion engines — Piston rings — Part 4: General specifications E
ISO/TR 14645:2015 * Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags C
ISO 12617:2015 * Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector C
TC 23 Tractors and machinery for agriculture and forestry
ISO 16122-1:2015 Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General B
ISO 16122-2:2015 Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers C
ISO 16122-3:2015 Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops C
ISO 16122-4:2015 Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers D
ISO 24253-1:2015 Crop protection equipment — Spray deposition test for field crop — Part 1: Measurement in a horizontal plane D
ISO 24253-2:2015 Crop protection equipment — Spray deposition test for field crop — Part 2: Measurement in a crop D
TC 29 Small tools
ISO 1711-1:2015 Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets A
ISO 1711-2:2015 Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) A
ISO 2725-1:2015 * Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets B
ISO 2725-2:2015 * Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets („impact”) B
ISO 2725-3:2015 * Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets („non-impact”) A
TC 34 Food products
ISO 11056:1999/Amd 2:2015 Sensory analysis — Methodology — Magnitude estimation method  — Amendment 2 XZ
ISO 29842:2011/Amd 1:2015 * Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1 XZ
ISO/TS 21569-3:2015 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms B
TC 37 Terminology and other language and content resources
ISO/TS 24620-1:2015 * Language resource management — Controlled natural language (CNL) — Part 1: Basic concepts and principles B
TC 38 Textiles
ISO/TR 11827:2012 Textiles — Composition testing — Identification of fibres G
ISO 18103:2015 Superfine woven wool fabric labelling — Requirements for Super S code definition B
ISO 1136:2015 * Wool — Determination of mean diameter of fibres — Air permeability method C
TC 39 Machine tools
ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy D
ISO/TR 16907:2015 * Machine tools — Numerical compensation of geometric errors E
TC 42 Photography
ISO 15781:2015 * Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time D
TC 44 Welding and allied processes
ISO 23277:2015 Non-destructive testing of welds — Penetrant testing — Acceptance levels A
TC 45 Rubber and rubber products
ISO 6505:2015 * Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals B
TC 58 Gas cylinders
ISO 21172-1:2015 * Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres F
TC 59 Buildings and civil engineering works
ISO 16757-1:2015 * Data structures for electronic product catalogues for building services — Part 1: Concepts, architecture and model E
ISO/TS 21929-2:2015 * Sustainability in building construction — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works E
TC 61 Plastics
ISO 899-1:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1 XZ
ISO 899-2:2003/Amd 1:2015 Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1 XZ
ISO 16012:2015 * Plastics — Determination of linear dimensions of test specimens B
ISO 23560:2015 * Woven polypropylene sacks for bulk packaging of foodstuffs B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 16901:2015 * Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface G
ISO 15589-1:2015 * Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines G
TC 68 Financial services
ISO 9564-1:2011/Amd 1:2015 * Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1 XZ
TC 72 Textile machinery and accessories
ISO 23771:2015 Textile machinery — Guide to the design of textile machinery for reduction of the noise emissions E
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM 51608:2015 * Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV C
ISO/ASTM 51649:2015 * Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV E
ISO/ASTM 51707:2015 * Guide for estimation of measurement uncertainty in dosimetry for radiation processing B
ISO 12799:2015 Nuclear energy — Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method A
TC 92 Fire safety
ISO 5660-1:2015 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) G
ISO 16405:2015 * Room corner and open calorimeter — Guidance on sampling and measurement of effluent gas production using FTIR technique C
TC 98 Bases for design of structures
ISO 2394:2015 * General principles on reliability for structures H
TC 106 Dentistry
ISO 7494-2:2015 Dentistry — Dental units — Part 2: Air, water, suction and wastewater systems D
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10816-6:1995/Amd 1:2015 * Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1 XZ
TC 121 Anaesthetic and respiratory equipment
ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets C
ISO 80601-2-13:2011/Amd 1:2015 * Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amendment 1 XZ
TC 122 Packaging
ISO 17480:2015 * Packaging — Accessible design — Ease of opening F
TC 131 Fluid power systems
ISO 6953-1:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements B
ISO 6953-2:2015 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers E
ISO 18413:2015 Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting F
ISO 3601-5:2015 * Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications C
TC 137 Footwear sizing designations and marking systems
ISO/TS 19408:2015 Footwear — Sizing — Vocabulary and terminology D
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 4427-1:2007/Amd 1:2015 * Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100 XZ
ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure A
ISO 3501:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force A
ISO 6259-1:2015 Thermoplastics pipes — Determination of tensile properties — Part 1: General test method B
ISO 13951:2015 Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading A
ISO 17778:2015 Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships A
ISO 7509:2015 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure B
ISO 18851:2015 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings B
ISO 4437-4:2015 * Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves C
TC 145 Graphical symbols
ISO 7001:2007/Amd 2:2015 * Graphical symbols — Public information symbols — Amendment 2 XZ
TC 146 Air quality
ISO 19289:2015 * Air quality — Meteorology — Siting classifications for surface observing stations on land C
TC 147 Water quality
ISO 17690:2015 * Water quality — Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection B
TC 172 Optics and photonics
ISO 9022-12:2015 * Optics and photonics — Environmental test methods — Part 12: Contamination B
ISO 9022-14:2015 * Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice A
ISO 9022-17:2015 * Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation A
ISO 14132-4:2015 * Optics and photonics — Vocabulary for telescopic systems — Part 4: Terms for astronomical telescopes A
TC 173 Assistive products for persons with disability
IEC 60601-2-52:2009/Amd 1:2015 * Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Amendment 1 XZ
ISO/TS 16840-12:2015 * Wheelchair seating — Part 12: Apparatus and method for cushion envelopment testing C
TC 174 Jewellery
ISO 15093:2015 Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES B
TC 178 Lifts, escalators and moving walks
ISO 25745-2:2015 Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators) C
ISO 25745-3:2015 Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escalators and moving walks C
TC 184 Automation systems and integration
ISO 15746-1:2015 * Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 1: Framework and functional model D
IEC 62264-2:2015 * Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integration H
TC 194 Biological and clinical evaluation of medical devices
ISO/TR 10993-33:2015 * Biological evaluation of medical devices — Part 33: Guidance on tests to evaluate genotoxicity — Supplement to ISO 10993-3 F
TC 201 Surface chemical analysis
ISO 14707:2015 * Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use B
TC 204 Intelligent transport systems
ISO/TS 21219-3:2015 * Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules C
ISO/TS 21219-4:2015 * Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 4: UML to XML conversion rules F
ISO/TS 21219-5:2015 * Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW) F
ISO/TS 21219-6:2015 * Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 2(TPEG2) — Part 6: Message management container (TPEG2-MMC) C
ISO/TS 21219-18:2015 * Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application (TPEG2-TFP) F
TC 215 Health informatics
ISO/IEEE 11073-00103:2015 * Health informatics — Personal health device communication — Part 00103: Overview G
ISO/IEEE 11073-10441:2015 * Health informatics — Personal health device communication — Part 10441: Device specialization — Cardiovascular fitness and activity monitor H
ISO/IEEE 11073-10442:2015 * Health informatics — Personal health device communication — Part 10442: Device specialization — Strength fitness equipment F
ISO/IEEE 11073-20601:2010/Amd 1:2015 Health informatics — Personal health device communication — Part 20601: Application profile — Optimized exchange protocol — Amendment 1 H
ISO/IEEE 11073-30200:2004/Amd 1:2015 Health informatics — Point-of-care medical device communication — Part 30200: Transport profile — Cable connected — Amendment 1 F
ISO/TR 80001-2-7:2015 * Application of risk management for IT-networks incorporating medical devices — Application guidance — Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1 H
TC 221 Geosynthetics
ISO 10318-1:2015 * Geosynthetics — Part 1: Terms and definitions A
ISO 10318-2:2015 Geosynthetics — Part 2: Symbols and pictograms B
TC 228 Tourism and related services
ISO 17680:2015 * Tourism and related services — Thalassotherapy — Service requirements D
TC 238 Solid biofuels
ISO 16993:2015 Solid biofuels — Conversion of analytical results from one basis to another B
ISO 16994:2015 Solid biofuels — Determination of total content of sulfur and chlorine B
TC 261 Additive manufacturing
ISO 17296-2:2015 Additive manufacturing — General principles — Part 2: Overview of process categories and feedstock B
TMBG Technical Management Board – groups
ISO 19600:2014 Compliance management systems — Guidelines E
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17234-1:2015 Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants C
JTC 1 Information technology
ISO/IEC 14651:2011/Amd 2:2015 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amendment 2 XZ
ISO/IEC 19793:2015 * Information technology — Open Distributed Processing — Use of UML for ODP system specifications H
ISO/IEC 11695-2:2015 * Identification cards — Optical memory cards — Holographic recording method — Part 2: Dimensions and location of accessible optical area A
ISO/IEC 16963:2015 * Information technology — Digitally recorded media for information interchange and storage — Test method for the estimation of lifetime of optical disks for long-term data storage G
ISO/IEC 14763-3:2014/Cor 1:2015 * Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling — Technical Corrigendum 1 free
ISO/IEC 27043:2015 * Information technology — Security techniques — Incident investigation principles and processes E
ISO/IEC 17991:2015 * Information technology — Office equipment — Method for Measuring Scanning Productivity of Digital Multifunctional Devices E
ISO/IEC 14496-3:2009/Amd 4:2013/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4: New levels for AAC profiles — Technical Corrigendum 1 free
ISO/IEC 14496-3:2009/Cor 5:2015 * Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 5 free
ISO/IEC 14496-5:2001/Amd 33:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 33: Reference software for MVC plus depth extension of AVC XZ
ISO/IEC 14496-5:2001/Amd 27:2011/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software — Technical Corrigendum 1 free
ISO/IEC 14496-12:2012/Amd 3:2015 * Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 3: Font streams and other improvements to file format XZ
ISO/IEC 14496-12:2012/Cor 3:2015 * Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 3 free
ISO/IEC 14496-15:2014/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in ISO base media file format — Technical Corrigendum 1 free
ISO/IEC 14496-16:2011/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Technical Corrigendum 1 free
ISO/IEC 14496-26:2010/Cor 8:2015 * Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigendum 8 free
ISO/IEC 14496-27:2009/Amd 2:2011/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 2: Scalable complexity 3D mesh coding conformance — Technical Corrigendum 1 free
ISO/IEC 14496-29:2015 * Information technology — Coding of audio-visual objects — Part 29: Web video coding H
ISO/IEC 14496-30:2014/Cor 1:2015 * Information technology — Coding of audio-visual objects — Part 30: Timed text and other visual overlays in ISO base media file format — Technical Corrigendum 1 free
ISO/IEC 15444-1:2004/Cor 4:2015 * Information technology — JPEG 2000 image coding system: Core coding system — Part 1:  — Technical Corrigendum 4 free
ISO/IEC 15444-12:2012/Amd 3:2015 * Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 3: Font streams and other improvements to file format XZ
ISO/IEC 15444-12:2012/Cor 3:2015 * Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 3 free
ISO/IEC 21000-8:2008/Amd 3:2015 * Information technology — Multimedia framework (MPEG-21) — Part 8: Reference software — Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology (MCO) Reference Software E
ISO/IEC 21000-21:2013/Cor 1:2015 * Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract Ontology — Technical Corrigendum 1 free
ISO/IEC 23001-7:2015 * Information technology — MPEG systems technologies — Part 7: Common encryption in ISO base media file format files C
ISO/IEC 23003-2:2010/Amd 3:2015 * Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 3: Dialogue enhancement XZ
ISO/IEC 23003-3:2012/Cor 3:2015 * Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Corrigendum 3 free
ISO/IEC 23008-1:2014/Cor 1:2015 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) — Technical Corrigendum 1 free
ISO/IEC 23008-11:2015 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 11: MPEG Media Transport Composition Information E
ISO/IEC 23009-1:2014/Cor 1:2015 * Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Technical Corrigendum 1 free
ISO/IEC 15459-2:2015 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 2: Registration procedures A
ISO/IEC 11179-5:2015 * Information technology — Metadata registries (MDR) — Part 5: Naming principles D
ISO/IEC 15944-4:2015 * Information technology — Business Operational View — Part 4: Business transaction scenarios — Accounting and economic ontology G
ISO/IEC 19763-12:2015 * Information technology — Metamodel framework for interoperability (MFI)               — Part 12: Metamodel for information model registration G
ISO/IEC 13250-5:2015 * Information technology — Topic Maps — Part 5: Reference model B
ISO/IEC 20006-2:2015 * Information technology for learning, education and training — Information model for competency — Part 2: Proficiency level information model E
ISO/IEC TR 29195:2015 * Traveller processes for biometric recognition in automated border D
ISO/IEC 29197:2015 * Information technology — Evaluation methodology for environmental influence in biometric system performance D
ISO/IEC 30121:2015 * Information technology — Governance of digital forensic risk framework A
Zobacz podobne  ISO.org – normy opublikowane w październiku 2017 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków