Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2015 | ISO.org – normy opublikowane w sierpniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w sierpniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w sierpniu 2015

Nowe normy i standardy opublikowane w sierpniu 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
TC 17 Steel
ISO 19272:2015 * Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu – Glow discharge optical emission spectrometry (routine method) E
ISO 4969:2015 Steel — Etching method for macroscopic examination B
TC 20 Aircraft and space vehicles
ISO 9940:2015 * Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical specification E
ISO 18423:2015 * Space data and information transfer systems — Pseudo-Noise (PN) Ranging Systems E
ISO 20104:2015 * Space data and information transfer systems — Producer-Archive Interface Specification (PAIS) H
ISO 20105:2015 * Space data and information transfer systems — Operation of CFDP over encapsulation service C
ISO 20106:2015 * Space data and information transfer systems — Mission operations common object model G
ISO 20107:2015 * Space data and information transfer systems — Spacecraft onboard interface services — Device virtualization service D
ISO 20205:2015 * Space data and information transfer systems — Spacecraft Onboard Interface Systems — Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control E
ISO 20206:2015 * Space data and information transfer systems — IP over CCSDS space links D
ISO 20207:2015 * Space data and information transfer systems — CCSDS Space Link Protocols over ETSI DVB-S2 Standard D
ISO 20208:2015 * Space data and information transfer systems — Delta-DOR Raw Data Exchange Format F
ISO 20210:2015 * Space data and information transfer systems — Mission Operations Message Abstraction Layer – JAVA API H
ISO 20211:2015 * Space data and information transfer systems — Spacecraft Onboard Interface Services — Device Access Service D
ISO 20213:2015 * Space data and information transfer systems — Spacecraft onboard interface services — Message transfer service E
ISO 20214:2015 * Space data and information transfer systems — Security architecture for space data systems F
ISO 20215:2015 * Space data and information transfer systems — CCSDS cryptographic algorithms D
ISO 20216:2015 * Space data and information transfer systems — Spacecraft onboard interface services — Device data pooling service E
ISO 20217:2015 * Space data and information transfer systems — Spacecraft onboard interface services — File and packet store services H
ISO 21459:2015 * Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer F
ISO 21460:2015 * Space data and information transfer systems — Proximity-1 space link protocol — Physical layer E
ISO 22663:2015 * Space data and information transfer systems — Proximity-1 space link protocol — Data link layer H
TC 22 Road vehicles
ISO 3006:2015 Road vehicles — Passenger car wheels for road use — Test methods B
ISO 3894:2015 Road vehicles — Wheels/rims for commercial vehicles — Test methods B
ISO 13948-1:2015 * Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections B
ISO 17840-1:2015 Road vehicles — Information for first and second responders — Part 1: Rescue sheet for passenger cars and light commercial vehicles D
TC 23 Tractors and machinery for agriculture and forestry
ISO 789-3:2015 * Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters B
ISO 6535:2015 Portable chain-saws — Chain brake performance A
ISO/TS 19858:2015 * Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil lubricity B
TC 29 Small tools
ISO/TS 13399-202:2015 * Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts F
TC 34 Food products
ISO 11085:2015 Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method C
ISO 17604:2015 * Microbiology of the food chain — Carcass sampling for microbiological analysis C
ISO 17780:2015 * Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable oils E
ISO 18363-1:2015 * Animal and vegetable fats and oils — Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS — Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol B
ISO 16779:2015 Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs B
TC 35 Paints and varnishes
ISO 8623:2015 Tall-oil fatty acids for paints and varnishes — Test methods and characteristic values B
TC 38 Textiles
ISO/TS 17920:2015 * Fibre ropes for offshore stationkeeping — Aramid F
ISO/TS 19336:2015 * Fibre ropes for offshore station keeping — Polyarylate F
TC 39 Machine tools
ISO 18217:2015 Safety of woodworking machines — Edge-banding machines fed by chain(s) F
TC 42 Photography
ISO 18383:2015 * Photography — Digital cameras — Specification guideline G
TC 44 Welding and allied processes
ISO 6848:2015 Arc welding and cutting — Nonconsumable tungsten electrodes — Classification B
TC 45 Rubber and rubber products
ISO 34-1:2015 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces C
ISO 34-2:2015 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces B
ISO 6133:2015 Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength A
ISO 249:2014 * Rubber, raw natural — Determination of dirt content B
ISO 15825:2015 Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry B
ISO 6123-1:2015 * Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness A
ISO 7229:2015 * Rubber- or plastics-coated fabrics — Measurement of gas permeability C
TC 58 Gas cylinders
ISO 17871:2015 Gas cylinders — Quick-release cylinder valves — Specification and type testing B
TC 59 Buildings and civil engineering works
ISO 11618:2015 * Buildings and Civil Engineering Works — Sealants — Classification and requirements for pedestrian walkway sealants B
ISO 15928-1:2015 * Houses — Description of performance — Part 1: Structural safety C
ISO 15928-2:2015 * Houses — Description of performance — Part 2: Structural serviceability C
ISO 15928-3:2015 * Houses — Description of performance — Part 3: Structural durability C
TC 60 Gears
ISO/TR 10828:2015 * Worm gears — Worm profiles and gear mesh geometry H
TC 61 Plastics
ISO 11357-7:2015 Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics B
ISO 22007-2:2015 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method D
ISO 16616:2015 * Test methods for natural fibre-reinforced plastic composite (NFC) deck boards C
ISO 19095-1:2015 * Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach A
ISO 19095-2:2015 * Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens B
ISO 19095-3:2015 * Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods C
ISO 19095-4:2015 * Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability C
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 15156-1:2015 * Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials B
ISO 15156-2:2015 * Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons F
ISO 15156-3:2015 * Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys H
TC 68 Financial services
ISO 4217:2015 * Codes for the representation of currencies A
TC 70 Internal combustion engines
ISO 8178-8:2015 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 13926-2:2011/Amd 1:2015 * Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1 XZ
TC 83 Sports and other recreational facilities and equipment
ISO/TR 20183:2015 Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards A
ISO 11110:2015 Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests B
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12749-4:2015 * Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing E
TC 92 Fire safety
ISO 19702:2015 * Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy G
ISO/TR 24679-3:2015 Fire safety engineering — Performance of structure in fire — Part 3: Example of an open car park F
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 606:2015 * Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets E
TC 102 Iron ore and direct reduced iron
ISO 16742:2014 * Iron ores — Sampling of slurries E
ISO/TR 18230:2015 * Iron ores — Determination of loss on ignition — Non-oxidised ores B
ISO 3271:2015 * Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices A
ISO 4695:2015 * Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index B
ISO 4696-1:2015 * Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2 B
ISO 4696-2:2015 * Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2 B
ISO 4700:2015 * Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength A
ISO 7215:2015 * Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index B
ISO 7992:2015 * Iron ores for blast furnace feedstocks — Determination of reduction under load B
ISO 8371:2015 * Iron ores for blast furnace feedstocks — Determination of the decrepitation index A
ISO 11256:2015 * Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index C
ISO 11257:2015 * Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization B
ISO 11258:2015 * Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization C
ISO 13930:2015 * Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method B
TC 106 Dentistry
ISO 6874:2015 Dentistry — Polymer-based pit and fissure sealants B
ISO 3630-3:2015 Dentistry — Endodontic instruments — Part 3: Compactors: pluggers and spreaders B
ISO 13397-5:2015 Dentistry — Periodontal curettes, dental scalers and excavators — Part 5: Jacquette scalers A
ISO 16408:2015 Dentistry — Oral care products — Oral rinses B
TC 110 Industrial trucks
ISO 22915-24:2015 * Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks C
TC 113 Hydrometry
ISO/TR 11651:2015 * Estimation of sediment deposition in reservoirs using one dimensional simulation models E
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-5:2009/Amd 1:2015 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills — Amendment 1: Feed force XZ
TC 126 Tobacco and tobacco products
ISO/TR 19478-2:2015 * ISO and Health Canada intense smoking parameters — Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes G
TC 130 Graphic technology
ISO 14861:2015 * Graphic technology — Requirements for colour soft proofing systems B
ISO/PAS 15339-1:2015 * Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles C
ISO/PAS 15339-2:2015 * Graphic technology — Printing from digital data across multiple technologies — Part 2: Characterized reference printing conditions, CRPC1-CRPC7 B
TC 131 Fluid power systems
ISO 19973-1:2015 * Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures F
ISO 6020-2:2015 Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series D
ISO 6020-3:2015 * Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm C
ISO 6432:2015 * Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions A
TC 135 Non-destructive testing
ISO 9934-1:2015 Non-destructive testing — Magnetic particle testing — Part 1: General principles C
ISO 9934-2:2015 Non-destructive testing — Magnetic particle testing — Part 2: Detection media D
ISO 9934-3:2015 Non-destructive testing — Magnetic particle testing — Part 3: Equipment B
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 18488:2015 * Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method B
TC 146 Air quality
ISO 17211:2015 * Stationary source emissions — Sampling and determination of selenium compounds in flue gas D
TC 147 Water quality
ISO/TS 16780:2015 * Water quality — Determination of polychlorinated naphthalenes (PCN) — Method using gas chromatography (GC) and mass spectrometry (MS) F
TC 149 Cycles
ISO 4210-2:2015 * Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles E
ISO 4210-6:2015 * Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods D
TC 155 Nickel and nickel alloys
ISO 7530-1:2015 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese D
TC 156 Corrosion of metals and alloys
ISO 8044:2015 * Corrosion of metals and alloys — Basic terms and definitions A
TC 158 Analysis of gases
ISO 6142-1:2015 Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures F
TC 159 Ergonomics
ISO 7250-3:2015 * Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards E
ISO 20685-2:2015 * Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions D
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23551-9:2015 * Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats D
TC 163 Thermal performance and energy use in the built environment
ISO 9972:2015 Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method D
TC 165 Timber structures
ISO 16598:2015 * Timber structures — Structural classification for sawn timber D
TC 171 Document management applications
ISO 18565:2015 * Document management — AFP/Archive E
TC 172 Optics and photonics
ISO 16671:2015 Ophthalmic implants — Irrigating solutions for ophthalmic surgery D
ISO 16672:2015 Ophthalmic implants — Ocular endotamponades C
TC 173 Assistive products for persons with disability
ISO 7176-8:2014 Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths G
ISO 16840-3:2014 Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices E
TC 189 Ceramic tile
ISO 13007-5:2015 * Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives D
ISO/TR 17870-1:2015 * Ceramic tiles — Guidelines for installation — Part 1: Installation of ceramic wall and floor tiles D
ISO/TR 17870-2:2015 * Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels D
TC 190 Soil quality
ISO 16558-1:2015 Soil quality — Risk-based petroleum hydrocarbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) C
ISO/TS 16558-2:2015 Soil quality — Risk-based petroleum hydrocarbons — Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) D
TC 195 Building construction machinery and equipment
ISO 21873-1:2015 * Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications D
TC 201 Surface chemical analysis
ISO 13083:2015 * Surface chemical analysis — Scanning probe microscopy — Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes C
TC 204 Intelligent transport systems
ISO/TR 16786:2015 * Intelligent transport systems — The use of simulation models for evaluation of traffic management systems — Input parameters and reporting template for simulation of traffic signal control systems C
ISO/TR 17465-2:2015 * Intelligent transport systems — Cooperative ITS — Part 2: Guidelines for standards documents B
ISO/TR 17465-3:2015 * Intelligent transport systems — Cooperative ITS — Part 3: Release procedures for standards documents A
TC 206 Fine ceramics
ISO 15733:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties B
ISO 17841:2015 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate C
TC 211 Geographic information/Geomatics
ISO 19136-2:2015 * Geographic information — Geography Markup Language (GML) — Part 2: Extended schemas and encoding rules G
ISO 19162:2015 * Geographic information — Well-known text representation of coordinate reference systems H
TC 213 Dimensional and geometrical product specifications and verification
ISO 14253-5:2015 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 5: Uncertainty in verification testing of indicating measuring instruments C
TC 215 Health informatics
ISO/TR 17522:2015 * Health informatics — Provisions for health applications on mobile/smart devices C
ISO/TS 22077-2:2015 * Health informatics — Medical waveform format — Part 2: Electrocardiography F
TC 221 Geosynthetics
ISO 25619-2:2015 * Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour B
TC 224 Service activities relating to drinking water supply systems and wastewater systems – Quality criteria of the service and performance indicators
ISO 24518:2015 * Activities relating to drinking water and wastewater services — Crisis management of water utilities D
TC 226 Materials for the production of primary aluminium
ISO 18842:2015 * Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density B
TC 229 Nanotechnologies
ISO/TS 17466:2015 * Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots C
TC 234 Fisheries and aquaculture
ISO 18538:2015 * Traceability of molluscan products — Specifications on the information to be recorded in farmed molluscan distribution chains F
TC 238 Solid biofuels
ISO 18134-1:2015 * Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method A
TC 251 Asset management
ISO 55000:2014 * Asset management — Overview, principles and terminology D
ISO 55002:2014 * Asset management — Management systems — Guidelines for the application of ISO 55001 E
TC 256 Pigments, dyestuffs and extenders
ISO 18473-1:2015 * Functional pigments and extenders for special applications — Part 1: Nanoscale calcium carbonate for sealant application A
ISO 18473-2:2015 * Functional pigments and extenders for special applications — Part 2: Nanoscale titanium dioxide for sunscreen application A
TC 257 Evaluation of energy savings
ISO 17742:2015 Energy efficiency and savings calculation for countries, regions and cities G
TC 266 Biomimetics
ISO 18458:2015 Biomimetics — Terminology, concepts and methodology D
ISO 18459:2015 Biomimetics — Biomimetic structural optimization D
TC 282 Water re-use
ISO 16075-1:2015 Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse project for irrigation E
ISO 16075-2:2015 Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the project D
ISO 16075-3:2015 Guidelines for treated wastewater use for irrigation projects — Part 3: Components of a reuse project for irrigation F
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 3379:2015 Leather — Determination of distension and strength of surface (Ball burst method) A
ISO 3380:2015 * Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C A
ISO 17235:2015 * Leather — Physical and mechanical tests — Determination of softness A
ISO 19074:2015 * Leather — Physical and mechanical tests — Determination of water absorption by capillary action (wicking) A
JTC 1 Information technology
ISO/IEC/IEEE 8802-11:2012/Amd 4:2015 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 4 H
ISO/IEC/IEEE 8802-11:2012/Amd 5:2015 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications — Amendment 5 H
ISO/IEC TR 19446:2015 * Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications D
ISO/IEC 11770-3:2015 * Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques H
ISO/IEC 27033-1:2015 * Information technology — Security techniques — Network security — Part 1: Overview and concepts F
ISO/IEC 29190:2015 * Information technology — Security techniques — Privacy capability assessment model C
ISO/IEC 28360:2015 * Information technology — Office equipment — Determination of chemical emission rates from electronic equipment F
ISO/IEC 14496-3:2009/Amd 5:2015 * Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 5: Support for Dynamic Range Control, New Levels for ALS Simple Profile, and Audio Synchronization D
ISO/IEC 14496-5:2001/Amd 32:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 32: Reference software for multi-resolution 3D mesh compression XZ
ISO/IEC 14496-5:2001/Amd 35:2015 * Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 35: 3D-AVC Reference software XZ
ISO/IEC 15938-13:2015 * Information technology — Multimedia content description interface — Part 13: Compact descriptors for visual search H
ISO/IEC 23003-1:2007/Amd 1:2008/Cor 3:2015 * Information technology — MPEG audio technologies — Part 1: MPEG Surround — Amendment 1: Conformance testing — Technical Corrigendum 3 free
ISO/IEC 23003-3:2012/Cor 4:2015 * Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Corrigendum 4 free
ISO/IEC 29170-2:2015 * Information technology — Advanced image coding and evaluation — Part 2: Evaluation procedure for nearly lossless coding D
ISO/IEC 15426-2:2015 * Information technology — Automatic identification and data capture techniques — Bar code verifier conformance specification — Part 2: Two-dimensional symbols C
ISO/IEC 16480:2015 * Information technology — Automatic identification and data capture techniques — Reading and display of ORM by mobile devices C
ISO/IEC 11179-6:2015 * Information technology — Metadata registries (MDR) — Part 6: Registration G
ISO/IEC 19763-5:2015 * Information technology — Metamodel framework for interoperability (MFI)                — Part 5: Metamodel for process model registration E
ISO/IEC 19763-6:2015 * Information technology — Metamodel framework for interoperability (MFI)                — Part 6: Registry Summary D
ISO/IEC 19785-1:2015 * Information technology — Common Biometric Exchange Formats Framework — Part 1: Data element specification F
ISO/IEC TR 29196:2015 * Guidance for biometric enrolment F
Zobacz podobne  Nowelizacja normy ISO 17025 cd.

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków