Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2016 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2016 roku | ISO.org – normy opublikowane w sierpniu 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w sierpniu 2016 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w sierpniu 2016 roku

Nowe normy i standardy opublikowane w sierpniu 2016 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
TC 1 Screw threads
ISO 2901:2016 ISO metric trapezoidal screw threads — Basic and design profiles A
ISO 2902:2016 ISO metric trapezoidal screw threads — General plan A
ISO 2903:2016 ISO metric trapezoidal screw threads — Tolerances C
TC 6 Paper, board and pulps
ISO 9197:2016 * Paper, board and pulps — Determination of water-soluble chlorides B
ISO 11476:2016 Paper and board — Determination of CIE whiteness, C/2° (indoor illumination conditions) C
TC 10 Technical product documentation
ISO 15787:2016 Technical product documentation — Heat-treated ferrous parts — Presentation and indications E
TC 17 Steel
ISO 13976:2016 * Hot-rolled steel sheet in coils of structural quality and heavy thickness B
ISO 14590:2016 * Cold-reduced steel sheet of high tensile strength and low yield point with improved formability B
TC 20 Aircraft and space vehicles
ISO 8168:2016 * Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification D
ISO 20683-1:2016 * Aircraft ground equipment — Nose gear towbarless towing vehicle (TLTV) — Design, testing and maintenance requirements — Part 1: Main line aircraft D
ISO 20683-2:2016 * Aircraft ground equipment — Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) — Part 2: Regional aircraft C
TC 22 Road vehicles
ISO 14230-2:2016 * Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer F
ISO 17987-1:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 1: General information and use case definition B
ISO 17987-2:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer services G
ISO 17987-3:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification F
ISO 17987-4:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical physical layer (EPL) specification 12 V/24 V E
ISO 11452-3:2016 * Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell D
ISO 12619-4:2016 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve A
ISO 12619-5:2016 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve A
TC 23 Tractors and machinery for agriculture and forestry
ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols H
ISO 3767-2:2016 * Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery G
ISO 3767-3:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment C
ISO 3767-4:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery E
ISO 3767-5:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines A
ISO 13693-1:2013 Irrigation equipment — Safety devices for chemigation — Part 1: Small plastics valves for chemigation D
ISO 15886-3:2012/Amd 1:2016 * Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods — Amendment 1 XZ
TC 29 Small tools
ISO 10897:2016 Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts B
ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A A
TC 31 Tyres, rims and valves
ISO 18106:2016 Passenger car, commercial vehicle, truck and bus tyres — Methods for measuring snow grip performance — Loaded new tyres D
TC 34 Food products
ISO 11816-2:2016 Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese C
ISO 22004:2014 * Food safety management systems — Guidance on the application of ISO 22000 E
TC 39 Machine tools
ISO 3070-2:2016 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type) G
TC 43 Acoustics
ISO 10140-1:2016 Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products G
TC 44 Welding and allied processes
ISO 10656:2016 Resistance welding equipment — Transformers — Integrated transformers for welding guns B
ISO 15618-1:2016 Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding D
TC 54 Essential oils
ISO 13171:2016 Essential oil of oregano [Origanum vulgare L. subsp. hirtum (Link) letsw] B
TC 60 Gears
ISO 6336-5:2016 * Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials F
TC 61 Plastics
ISO 18830:2016 * Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer B
ISO 19679:2016 * Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 18797-1:2016 * Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM E
ISO 19008:2016 * Standard cost coding system for oil and gas production and processing facilities B
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings H
TC 69 Applications of statistical methods
ISO 22514-4:2016 * Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures F
TC 79 Light metals and their alloys
ISO 16374:2016 * Evaluation method for cleanliness of magnesium and magnesium alloy ingots A
TC 84 Devices for administration of medicinal products and catheters
ISO 6009:2016 Hypodermic needles for single use — Colour coding for identification A
ISO 7864:2016 Sterile hypodermic needles for single use — Requirements and test methods D
ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods D
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12183:2016 * Nuclear fuel technology — Controlled-potential coulometric assay of plutonium E
TC 96 Cranes
ISO 12480-3:2016 Cranes — Safe use — Part 3: Tower cranes E
ISO 11031:2016 Cranes — Principles for seismically resistant design F
TC 108 Mechanical vibration, shock and condition monitoring
ISO 16063-32:2016 * Methods for the calibration of vibration and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation B
TC 110 Industrial trucks
ISO 22915-7:2016 Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks C
TC 114 Horology
IEC 60086-3:2016 * Primary batteries — Part 3: Watch batteries F
TC 121 Anaesthetic and respiratory equipment
ISO 5361:2016 Anaesthetic and respiratory equipment — Tracheal tubes and connectors F
ISO 5364:2016 Anaesthetic and respiratory equipment — Oropharyngeal airways C
TC 131 Fluid power systems
ISO 5781:2016 Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces D
ISO 12829:2016 Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope B
TC 133 Clothing sizing systems – size designation, size measurement methods and digital fittings
ISO 18825-2:2016 Clothing — Digital fittings — Part 2: Vocabulary and terminology used for attributes of the virtual human body F
TC 145 Graphical symbols
ISO 28564-2:2016 * Public information guidance systems — Part 2: Guidelines for the design and use of location signs and direction signs E
TC 147 Water quality
ISO 18635:2016 Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and electron capture negative ionization (ECNI) E
ISO 13168:2015 Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting C
TC 149 Cycles
ISO 6699:2016 * Cycles — Handlebar centre and stem dimensions A
TC 150 Implants for surgery
ISO 15674:2016 * Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags B
ISO 15675:2016 * Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial blood line filters B
ISO 15676:2016 * Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) B
ISO 18241:2016 * Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems — Venous bubble traps B
ISO 18242:2016 * Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps B
ISO/TR 19024:2016 * Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass B
ISO 7207-2:2011/Amd 1:2016 Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1 XZ
TC 156 Corrosion of metals and alloys
ISO/TR 16203:2016 Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids B
TC 159 Ergonomics
ISO/TS 21144:2016 * Ergonomics of human-system interaction —  Electronic paper display — Indoor use C
TC 164 Mechanical testing of metals
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method E
TC 182 Geotechnics
ISO 22476-15:2016 * Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling D
TC 192 Gas turbines
ISO 19859:2016 Gas turbine applications — Requirements for power generation H
TC 193 Natural gas
ISO 6976:2016 * Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition G
TC 204 Intelligent transport systems
ISO/TS 16460:2016 * Intelligent transport systems — Communications access for land mobiles (CALM) — Communication protocol messages for global usage F
ISO/TS 21219-16:2016 * Intelligent transport systems — Traffic and travel information via transport protocol exports group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI) G
TC 207 Environmental management
ISO/TR 14073:2016 * Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046 G
TC 210 Quality management and corresponding general aspects for medical devices
ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications F
TC 211 Geographic information/Geomatics
ISO/TS 19115-3:2016 * Geographic information —  Metadata — Part 3: XML schema implementation for fundamental concepts G
TC 213 Dimensional and geometrical product specifications and verification
ISO 1:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties A
ISO 14405-1:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes G
ISO/TS 17865:2016 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems B
TC 224 Service activities relating to drinking water supply systems and wastewater systems – Quality criteria of the service and performance indicators
ISO 24521:2016 * Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services G
TC 238 Solid biofuels
ISO 18846:2016 Solid biofuels — Determination of fines content in samples of pellets A
ISO 18847:2016 Solid biofuels — Determination of particle density of pellets and briquettes B
TC 249 Traditional chinese medicine
ISO 18746:2016 * Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use B
TC 260 Human resource management
ISO 30400:2016 * Human resource management — Vocabulary C
ISO 30405:2016 Human resource management — Guidelines on recruitment D
ISO 30408:2016 Human resource management — Guidelines on human governance C
ISO 30409:2016 * Human resource management — Workforce planning E
TMBG Technical Management Board – groups
IWA 23:2016 * Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification B
IWA 24:2016 * Non-sewered sanitation systems — General safety and performance requirements for design and testing H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 19076:2016 Leather — Measurement of leather surface — Using electronic techniques C
JTC 1 Information technology
ISO/IEC 14443-3:2016 * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision G
ISO/IEC 18745-2:2016 * Information technology — Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface F
ISO/IEC TS 17961:2013/Cor 1:2016 * Information technology — Programming languages, their environments and system software interfaces — C secure coding rules — Technical Corrigendum 1 free
ISO/IEC TS 18661-5:2016 * Information Technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 5: Supplementary attributes D
ISO/IEC 24734:2014/Cor 1:2016 * Information technology — Office equipment — Method for measuring digital printing productivity — Technical Corrigendum 1 free
ISO/IEC 23008-3:2015/Amd 2:2016 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 2: MPEG-H 3D Audio File Format Support XZ
ISO/IEC 15961-4:2016 * Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interface commands for battery assist and sensor functionality D
ISO/IEC TR 18120:2016 * Information technology — Learning, education, and training — Requirements for e-textbooks in education G
ISO/IEC 19794-14:2013/Amd 1:2016 * Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conformance testing and clarification of defects H

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków