Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2017 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w sierpniu 2017 roku | ISO.org – normy opublikowane w sierpniu 2017 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w sierpniu 2017 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w sierpniu 2017 roku

Nowe normy i standardy opublikowane w sierpniu 2017 roku:

* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 Grupa  Cenowa
IIW International Institute of Welding
ISO 14271:2017 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds B
ISO/TS 20273:2017 Guidelines on weld quality in relationship to fatigue strength F
PC 280 Management consultancy
ISO 20700:2017 Guidelines for management consultancy services E
REMCO Committee on reference materials
ISO Guide 35:2017 * Reference materials — Guidance for characterization and assessment of homogeneity and stability H
TC 4 Rolling bearings
ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan D
ISO 15242-3:2017 Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface B
ISO 15242-4:2017 * Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface B
ISO 20015:2017 * Spherical plain bearings — Method for the calculation of static and dynamic load ratings B
TC 6 Paper, board and pulps
ISO 11480:2017 Pulp, paper and board — Determination of total chlorine and organically bound chlorine C
ISO 8791-3:2017 * Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method C
TC 8 Ships and marine technology
ISO 20155:2017 * Ships and marine technology — Test method of flow induced in-pipe noise source characteristics for a ship-used pump D
TC 20 Aircraft and space vehicles
ISO 9667:2017 * Aircraft ground support equipment — Tow bars B
ISO 10842:2017 * Aircraft — Ground service connections — Locations and types B
ISO 19683:2017 * Space systems — Design qualification and acceptance tests of small spacecraft and units H
TC 21 Equipment for fire protection and fire fighting
ISO 6183:2009/Amd 1:2017 * Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation — Amendment 1 XZ
TC 22 Road vehicles
ISO 17409:2015 Electrically propelled road vehicles — Connection to an external electric power supply — Safety requirements D
ISO/TS 19466:2017 * Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems C
ISO 2575:2010/Amd 6:2017 * Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 6 XZ
ISO 2575:2010/Amd 7:2017 * Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 7 XZ
ISO 12619-8:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 8: Pressure indicator A
ISO 12619-9:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV) A
ISO 12619-10:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 10: Pressure relief device (PRD) B
ISO 12619-11:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 11: Excess flow valve A
ISO 12619-12:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses A
ISO 12619-13:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel A
ISO 12619-14:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line A
ISO 12619-15:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 15: Filter A
ISO 12619-16:2017 * Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 16: Fittings A
TC 23 Tractors and machinery for agriculture and forestry
ISO 21628:2008/Amd 1:2015 Gardening machinery — Powered material-collecting systems — Safety — Amendment 1 XZ
TC 27 Solid mineral fuels
ISO 7404-4:2017 * Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition B
TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 2592:2017 Petroleum and related products — Determination of flash and fire points — Cleveland open cup method C
TC 29 Small tools
ISO 3364:2017 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions C
TC 30 Measurement of fluid flow in closed conduits
ISO 12764:2017 * Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full D
TC 31 Tyres, rims and valves
ISO 4250-2:2017 * Earth-mover tyres and rims — Part 2: Loads and inflation pressures D
ISO 18885-1:2017 TPMS snap-in valves — Part 1: Identification A
TC 34 Food products
ISO/TS 34700:2016 Animal welfare management — General requirements and guidance for organizations in the food supply chain B
ISO 21294:2017 Oilseeds — Manual or automatic discontinuous sampling B
ISO 12099:2017 Animal feeding stuffs, cereals and milled cereal products — Guidelines for the application of near infrared spectrometry E
TC 35 Paints and varnishes
ISO 11997-1:2017 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid C
ISO 15110:2017 Paints and varnishes — Artificial weathering including acidic deposition C
ISO 19396-1:2017 * Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane C
ISO 19396-2:2017 * Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology C
ISO 19399:2016 Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill method) E
TC 38 Textiles
ISO 1833-7:2017 * Textiles — Quantitative chemical analysis — Part 7: Mixtures of polyamide with certain other fibres (method using formic acid) A
ISO 1833-11:2017 * Textiles — Quantitative chemical analysis — Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) A
ISO 105-G01:2016 Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides B
TC 39 Machine tools
ISO/TR 17243-2:2017 * Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min C
TC 43 Acoustics
ISO 9296:2017 Acoustics — Declared noise emission values of information technology and telecommunications equipment C
TC 44 Welding and allied processes
ISO 19285:2017 Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels D
ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds C
ISO 18278-3:2017 Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding D
ISO 9455-11:2017 Soft soldering fluxes — Test methods — Part 11: Solubility of flux residues A
ISO 9455-13:2017 Soft soldering fluxes — Test methods — Part 13: Determination of flux spattering A
ISO 9455-14:2017 Soft soldering fluxes — Test methods — Part 14: Assessment of tackiness of flux residues A
ISO 9455-15:2017 Soft soldering fluxes — Test methods — Part 15: Copper corrosion test B
TC 45 Rubber and rubber products
ISO 4079:2017 * Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification C
ISO 6943:2017 Rubber, vulcanized — Determination of tension fatigue C
ISO 7267-1:2017 Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method A
ISO 7267-3:2017 Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method B
ISO 19984-1:2017 * Rubber and rubber products — Determination of biobased content — Part 1: General principles and calculation methods using the formulation of the rubber compound C
ISO 19984-2:2017 * Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content D
ISO 19984-3:2017 * Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content D
ISO 2930:2017 Rubber, raw natural — Determination of plasticity retention index (PRI) B
ISO 11236:2017 Rubber compounding ingredients — p-Phenylenediamine antidegradants (PPDs) — Test methods D
ISO 20851:2017 * Synthetic rubber latex — Examination for microorganisms A
ISO 22768:2017 * Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC) B
ISO 2321:2017 * Rubber threads — Methods of test E
ISO 4675:2017 * Rubber- or plastics-coated fabrics — Low-temperature bend test A
ISO 5470-1:2016 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader B
ISO 17717:2017 * Meteorological balloons — Specification D
ISO 20058:2017 * General purpose rubber thread — Specification A
TC 46 Information and documentation
ISO 28500:2017 * Information and documentation — WARC file format D
ISO/TR 19814:2017 * Information and documentation — Collections management for archives and libraries G
TC 58 Gas cylinders
ISO 15996:2017 Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices D
TC 59 Buildings and civil engineering works
ISO 6707-3:2017 * Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms A
ISO 15928-4:2017 * Houses — Description of performance — Part 4: Fire safety C
TC 61 Plastics
ISO 10210:2012 Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials D
ISO 14853:2016 Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production E
ISO 15985:2014 Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas B
ISO 18830:2016 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer B
ISO 19679:2016 Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide B
ISO 4582:2017 * Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources C
ISO 19699-1:2017 * Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods B
ISO 19699-2:2017 * Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 2: Specifications A
ISO 3616:2001/Amd 1:2017 * Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1 XZ
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 14224:2016 Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment H
ISO 18797-1:2016 Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM E
ISO 19008:2016 Standard cost coding system for oil and gas production and processing facilities B
ISO 18647:2017 * Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms H
ISO 14692-1:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials G
ISO 14692-2:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture G
ISO 14692-3:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design F
ISO 14692-4:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation G
ISO 24817:2017 * Petroleum, petrochemical and natural gas industries  — Composite repairs for pipework — Qualification and design, installation, testing and inspection H
TC 70 Internal combustion engines
ISO 8178-4:2017 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications H
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/TR 19727:2017 * Medical devices — Pump tube spallation test — General procedure A
TC 83 Sports and other recreational facilities and equipment
ISO 25649-1:2017 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods E
ISO 25649-2:2017 Floating leisure articles for use on and in the water — Part 2: Consumer information D
ISO 25649-3:2017 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices C
ISO 25649-4:2017 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices D
ISO 25649-5:2017 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices D
ISO 25649-6:2017 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices C
ISO 25649-7:2017 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices D
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 19361:2017 Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting D
ISO 22875:2017 Nuclear energy — Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets B
TC 89 Wood-based panels
ISO 2074:2007/Amd 1:2017 * Plywood — Vocabulary — Amendment 1 A
TC 92 Fire safety
ISO 13943:2017 * Fire safety — Vocabulary A
ISO/TR 24679-4:2017 * Fire safety engineering — Performance of structures in fire — Part 4: Example of a fifteen-storey steel-framed office building F
TC 94 Personal safety — Protective clothing and equipment
ISO 20349-2:2017 Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes B
TC 96 Cranes
ISO 9927-5:2017 * Cranes — Inspections — Part 5: Bridge and gantry cranes, including portal and semi-portal cranes and their supporting structures C
TC 102 Iron ore and direct reduced iron
ISO 15633:2017 * Iron ores — Determination of nickel  — Flame atomic absorption spectrometric method C
ISO 22682:2017 * Iron ores — Determination of trace elements — Plasma spectrometric method D
TC 106 Dentistry
ISO 9917-2:2017 Dentistry — Water-based cements — Part 2: Resin-modified cements D
ISO 19490:2017 Dentistry — Sinus membrane elevator A
TC 107 Metallic and other inorganic coatings
ISO 20523:2017 * Carbon based films — Classification and designations B
ISO 2082:2017 Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel C
TC 108 Mechanical vibration, shock and condition monitoring
ISO 7919-4:2009/Amd 1:2017 Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1 XZ
ISO 10816-3:2009/Amd 1:2017 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1 XZ
ISO 10816-4:2009/Amd 1:2017 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1 XZ
ISO 13373-7:2017 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants D
ISO/TR 18570:2017 * Mechanical vibration — Measurement and evaluation of human exposure to hand transmitted vibration — Supplementary method for assessing risk of vascular disorders C
TC 112 Vacuum technology
ISO 3669:2017 Vacuum technology — Bakeable flanges — Dimensions of knife-edge flanges B
TC 119 Powder metallurgy
ISO 3927:2017 Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression B
TC 122 Packaging
ISO/TS 17451-2:2017 * Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 2: XML messaging structure for electronic transmission of inventory data D
TC 127 Earth-moving machinery
ISO 10987-2:2017 Earth-moving machinery — Sustainability — Part 2: Remanufacturing B
ISO 10987-3:2017 Earth-moving machinery — Sustainability — Part 3: Used machines B
ISO 7131:2009/Amd 1:2017 Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1 XZ
TC 130 Graphic technology
ISO 2846-1:2017 * Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing C
ISO 16613-1:2017 * Graphic technology — Variable content replacement — Part 1: Using PDF/X for variable content replacement (PDF/VCR-1) D
ISO 20654:2017 * Graphic technology — Measurement and calculation of spot colour tone value A
TC 131 Fluid power systems
ISO 6149-4:2017 Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs B
ISO 7789:2007 Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities D
ISO 20401:2017 * Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors A
ISO 4406:2017 * Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles A
TC 132 Ferroalloys
ISO 5446:2017 * Ferromanganese — Specification and conditions of delivery B
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 13260:2010/Amd 1:2017 * Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1 XZ
ISO 12176-1:2017 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion D
ISO 19892:2011 Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling A
TC 142 Cleaning equipment for air and other gases
ISO 29464:2017 Cleaning of air and other gases — Terminology E
TC 146 Air quality
ISO 9096:2017 * Stationary source emissions — Manual determination of mass concentration of particulate matter F
ISO 16000-33:2017 Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) F
TC 156 Corrosion of metals and alloys
ISO 19280:2017 * Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution C
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 25841:2017 * Female condoms — Requirements and test methods G
TC 158 Analysis of gases
ISO 16664:2017 Gas analysis — Handling of calibration gases and gas mixtures — Guidelines C
TC 159 Ergonomics
ISO 7250-1:2017 * Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks G
ISO 9241-125:2017 Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information F
ISO 7243:2017 * Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index C
TC 163 Thermal performance and energy use in the built environment
ISO 12569:2017 Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method G
TC 165 Timber structures
ISO 12122-6:2017 * Timber structures — Determination of characteristic values — Part 6: Large components and assemblies D
TC 168 Prosthetics and orthotics
ISO 21063:2017 Prosthetics and orthotics — Soft orthoses — Uses, functions, classification and description A
ISO 21064:2017 Prosthetics and orthotics — Foot orthotics — Uses, functions classification and description A
ISO 21065:2017 Prosthetics and orthotics — Terms relating to the treatment and rehabilitation of persons having a lower limb amputation A
TC 172 Optics and photonics
ISO 10110-7:2017 Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections B
ISO 14997:2017 Optics and photonics — Test methods for surface imperfections of optical elements C
ISO/TR 21477:2017 * Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems A
ISO 11978:2017 Ophthalmic optics — Contact lenses and contact lens care products — Labelling B
ISO 11979-8:2017 Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements A
ISO 18369-1:2017 Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications A
ISO 18369-2:2017 Ophthalmic optics — Contact lenses — Part 2: Tolerances B
ISO 18369-3:2017 Ophthalmic optics — Contact lenses — Part 3: Measurement methods F
ISO 18369-4:2017 Ophthalmic optics — Contact lenses — Part 4: Physicochemical properties of contact lens materials F
ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics C
TC 184 Automation systems and integration
ISO 8000-2:2017 * Data quality — Part 2: Vocabulary A
ISO 18828-3:2017 * Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 3: Information flows in production planning processes G
TC 190 Soil quality
ISO 18400-102:2017 Soil quality — Sampling — Part 102: Selection and application of sampling techniques G
ISO 18400-103:2017 Soil quality — Sampling — Part 103: Safety E
ISO 18400-105:2017 Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples B
ISO 18400-106:2017 Soil quality — Sampling — Part 106: Quality control and quality assurance B
ISO 18400-107:2017 Soil quality — Sampling — Part 107: Recording and reporting B
ISO 18400-201:2017 Soil quality — Sampling — Part 201: Physical pretreatment in the field D
ISO 11504:2017 * Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons D
ISO 18504:2017 * Soil quality — Sustainable remediation D
TC 201 Surface chemical analysis
ISO 19668:2017 * Surface chemical analysis — X-ray photoelectron spectroscopy — Estimating and reporting detection limits for elements in homogeneous materials D
TC 204 Intelligent transport systems
ISO 14817-3:2017 * Intelligent transport systems — ITS data dictionaries — Part 3: Object identifier assignments for ITS data concepts B
ISO/TR 18317:2017 * Intelligent transport systems — Pre-emption of ITS communication networks for disaster and emergency communication — Use case scenarios A
TC 206 Fine ceramics
ISO 18753:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer B
ISO 19674:2017 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula B
TC 210 Quality management and corresponding general aspects for medical devices
ISO 16142-2:2017 * Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards F
TC 211 Geographic information/Geomatics
ISO 19155-2:2017 * Geographic information — Place Identifier (PI) architecture — Part 2: Place Identifier (PI) linking E
TC 215 Health informatics
ISO/IEEE 11073-10418:2014/Cor 1:2016 Health informatics — Personal health device communication — Part 10418: Device specialization — International Normalized Ratio (INR) monitor — Technical Corrigendum 1 free
ISO 12052:2017 Health informatics — Digital imaging and communication in medicine (DICOM) including workflow and data management C
ISO 17090-5:2017 * Health informatics — Public key infrastructure — Part 5: Authentication using Healthcare PKI credentials C
IEC/TR 80001-2-9:2017 * Application of risk management for IT-networks incorporating medical devices — Part 2-9: Application guidance — Guidance for use of security assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities BD
TC 219 Floor coverings
ISO 9405:2015 Textile floor coverings — Assessment of changes in appearance A
TC 228 Tourism and related services
ISO 17679:2016 Tourism and related services — Wellness spa — Service requirements C
TC 229 Nanotechnologies
ISO/TR 19601:2017 Nanotechnologies — Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) G
ISO/TS 20477:2017 * Nanotechnologies — Standard terms and their definition for cellulose nanomaterial A
TC 232 Learning services outside formal education
ISO 29993:2017 * Learning services outside formal education — Service requirements B
TC 244 Industrial furnaces and associated processing equipment
ISO 13579-11:2017 * Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating energy efficiency — Part 11: Evaluation of various kinds of efficiency G
TC 249 Traditional chinese medicine
ISO 20333:2017 * Traditional Chinese medicine — Coding rules for Chinese medicines in supply chain management B
TC 261 Additive manufacturing
ISO/ASTM 52901:2017 Additive manufacturing — General principles — Requirements for purchased AM parts B
TC 265 Carbon dioxide capture, transportation, and geological storage
ISO/TR 27915:2017 * Carbon dioxide capture, transportation and geological storage — Quantification and verification G
TC 268 Sustainable cities and communities
ISO 37154:2017 * Smart community infrastructures — Best practice guidelines for transportation D
TC 269 Railway applications
ISO 19659-1:2017 Railway applications — Heating, ventilation and air conditioning systems for rolling stock — Part 1: Terms and definitions A
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17231:2017 Leather — Physical and mechanical tests — Determination of water repellency of garment leather B
CASCO Committee on conformity assessment
ISO/IEC 17025:2005 * General requirements for the competence of testing and calibration laboratories E
JTC 1 Information technology
ISO/IEC/IEEE 8802-1Q:2016/Amd 1:2017 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 1: Path control and reservation H
ISO/IEC/IEEE 8802-1Q:2016/Amd 3:2017 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 3: Enhancements for scheduled traffic G
ISO/IEC/IEEE 8802-1AB:2017 * Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1AB: Station and media access control connectivity discovery H
ISO/IEC 25063:2014 Systems and software engineering — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description E
ISO/IEC 25064:2013 Systems and software engineering — Software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: User needs report D
ISO/IEC 26558:2017 * Software and systems engineering — Methods and tools for variability modelling in software and systems product line F
ISO/IEC 26559:2017 * Software and systems engineering — Methods and tools for variability traceability in software and systems product line E
ISO/IEC 14543-5-8:2017 * Information technology — Home electronic systems (HES) architecture — Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 — Remote access core protocol F
ISO/IEC 14543-5-9:2017 * Information technology — Home electronic systems (HES) architecture — Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 — Remote access service platform D
ISO/IEC 14888-3:2016 * Information technology — Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms H
ISO/IEC 15946-5:2017 * Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 5: Elliptic curve generation E
ISO/IEC 20009-4:2017 * Information technology — Security techniques — Anonymous entity authentication — Part 4: Mechanisms based on weak secrets D
ISO/IEC 29151:2017 * Information technology — Security techniques — Code of practice for personally identifiable information protection F
ISO/IEC 14496-22:2015/Amd 2:2017 * Information technology — Coding of audio-visual objects — Part 22: Open Font Format — Amendment 2: Updated text layout features and implementations XZ
ISO/IEC 23001-4:2017 * Information technology — MPEG systems technologies — Part 4: Codec configuration representation H
ISO/IEC 23008-1:2017 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) H
ISO/IEC TR 23008-13:2017 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 13: MPEG media transport implementation guidelines H
ISO/IEC 30113-11:2017 * Information technology — Gesture-based interfaces across devices and methods — Part 11: Single-point gestures for common system actions E
ISO/IEC TR 20748-2:2017 * Information technology for learning, education and training — Learning analytics interoperability — Part 2: System requirements C
ISO/IEC 30107-3:2017 * Information technology — Biometric presentation attack detection — Part 3: Testing and reporting E
Zobacz podobne  ISO.org – normy opublikowane w czerwcu 2017 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków