Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w styczniu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w styczniu 2015 | ISO.org – normy opublikowane w styczniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w styczniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w styczniu 2015

Nowe normy międzynarodowe opublikowane od 1 do 31 stycznia 2015

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

 

Standards published

New International Standards published between 01 January and 31 January 2015
* Available in English only
** French version of standard previously published in English only
Price group
PC 251 Asset management
ISO 55000:2014 * Asset management — Overview, principles and terminology D
ISO 55001:2014 * Asset management — Management systems — Requirements C
ISO 55002:2014 * Asset management — Management systems — Guidelines for the application of ISO 55001 E
TC 2 Fasteners
ISO 4017:2014 Fasteners — Hexagon head screws — Product grades A and B B
TC 8 Ships and marine technology
ISO 14884:2015 * Large yachts — Weathertight doors — Strength and weathertightness requirements B
TC 10 Technical product documentation
ISO 17599:2015 * Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products D
TC 17 Steel
ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels D
ISO 4997:2015 * Cold-reduced carbon steel sheet of structural quality B
ISO 377:2013 * Steel and steel products — Location and preparation of samples and test pieces for mechanical testing D
TC 21 Equipment for fire protection and fire fighting
ISO 14520-13:2015 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant A
TC 22 Road vehicles
ISO 14229-7:2015 * Road vehicles — Unified diagnostic services (UDS) — Part 7: UDS on local interconnect network (UDSonLIN) C
ISO 16844-4:2015 * Road vehicles — Tachograph systems — Part 4: CAN interface D
ISO 16844-6:2015 * Road vehicles — Tachograph systems — Part 6: Diagnostics C
ISO 16844-7:2015 * Road vehicles — Tachograph systems — Part 7: Parameters G
ISO 18542-2:2014 Road vehicles — Standardized repair and maintenance information (RMI) terminology — Part 2: Standardized process implementation requirements, Registration Authority E
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 17308:2015 * Petroleum products and other liquids — Ethanol — Determination of electrical conductivity A
TC 29 Small tools
ISO 9138:2015 * Abrasive grains — Sampling and splitting A
TC 33 Refractories
ISO 16349:2015 Refractory materials — Determination of abrasion resistance at elevated temperature B
TC 34 Food products
ISO 5527:2015 * Cereals — Vocabulary A
ISO 4833-1:2013 * Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 degrees C by the pour plate technique B
ISO 4833-2:2013 * Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 degrees C by the surface plating technique B
ISO/TS 21569-3:2015 * Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms B
TC 37 Terminology and other language and content resources
ISO 24622-1:2015 * Language resource management — Component Metadata Infrastructure (CMDI) — Part 1: The Component Metadata Model B
TC 38 Textiles
ISO 17299-4:2015 * Textiles — Determination of deodorant property — Part 4: Condensation sampling analysis D
TC 39 Machine tools
ISO 10791-1:2015 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis) H
ISO 23125:2015 Machine tools — Safety — Turning machines G
TC 43 Acoustics
ISO 362-1:2015 * Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories G
ISO/TR 17534-3:2015 * Acoustics — Software for the calculation of sound outdoors — Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 G
TC 44 Welding and allied processes
ISO/TR 14745:2015 * Welding — Post-weld heat treatment parameters for steels B
TC 54 Essential oils
ISO 3064:2015 Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.)) B
TC 58 Gas cylinders
ISO 11120:2015 Gas cylinders — Refillable seamless steel tubes of water capacity between 150 l and 3000 l — Design, construction and testing E
TC 60 Gears
ISO/TR 15144-2:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting F
TC 63 Glass containers
ISO 12818:2013 Glass packaging — Standard tolerances for flaconnage B
ISO 12821:2013 Glass packaging — 26 H 180 crown finish — Dimensions A
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 18683:2015 * Guidelines for systems and installations for supply of LNG as fuel to ships F
ISO 13354:2014 Petroleum and natural gas industries — Drilling and production equipment — Shallow gas diverter equipment F
TC 69 Applications of statistical methods
ISO 17258:2015 Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 10406-1:2015 * Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids F
ISO 10406-2:2015 * Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets E
TC 84 Devices for administration of medicinal products and catheters
ISO 10555-1:2013 * Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements D
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 17099:2014 Radiological protection — Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry E
ISO 18589-2:2015 * Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples D
ISO 15366-1:2014 Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range B
ISO 15366-2:2014 Nuclear fuel technology — Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography — Part 2: Samples containing plutonium and uranium in the nanogram range and below B
TC 92 Fire safety
ISO 14934-4:2014 Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests D
ISO 5925-1:2007/Amd 1:2015 * Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests — Amendment 1 XZ
ISO 6944-1:2008/Amd 1:2015 * Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1 XZ
TC 96 Cranes
ISO 12482:2014 Cranes — Monitoring for crane design working period C
TC 106 Dentistry
ISO/TS 11405:2015 * Dentistry — Testing of adhesion to tooth structure B
ISO 9687:2015 Dentistry — Graphical symbols for dental equipment E
TC 107 Metallic and other inorganic coatings
ISO 14919:2015 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions C
ISO 14920:2015 Thermal spraying — Spraying and fusing of self-fluxing alloys B
TC 110 Industrial trucks
ISO 22915-12:2015 Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer B
TC 111 Round steel link chains, chain slings, components and accessories
ISO 16872:2015 * Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade VH C
ISO 16877:2015 * Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade TH C
TC 121 Anaesthetic and respiratory equipment
IEC 60601-1-11:2015 * Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment H
ISO 80601-2-70:2015 Medical Electrical Equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment F
TC 130 Graphic technology
ISO 12647-5:2015 * Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing B
TC 137 Footwear sizing designations and marking systems
ISO/TS 19407:2015 * Footwear — Sizing — Conversion of sizing systems B
ISO/TS 19408:2015 * Footwear — Sizing — Vocabulary and terminology D
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 11297-3:2013 * Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes C
TC 146 Air quality
ISO 25597:2013 * Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution G
ISO 16000-20:2014 Indoor air — Part 20: Detection and enumeration of moulds — Determination of total spore count C
TC 147 Water quality
ISO 13164-1:2013 * Water quality — Radon-222 — Part 1: General principles D
TC 149 Cycles
ISO 4210-5:2014 * Cycles — Safety requirements for bicycles — Part 5: Steering test methods C
TC 150 Implants for surgery
ISO 13779-6:2015 Implants for surgery — Hydroxyapatite — Part 6: Powders B
ISO 7199:2009 Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) B
TC 156 Corrosion of metals and alloys
ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests C
TC 163 Thermal performance and energy use in the built environment
ISO 16956:2015 * Thermal performance in the built environment — Determination of air flow rate in building applications by field measuring methods D
TC 168 Prosthetics and orthotics
ISO 13405-1:2015 Prosthetics and orthotics — Classification and description of prosthetic components — Part 1: Classification of prosthetic components A
ISO 13405-2:2015 Prosthetics and orthotics — Classification and description of prosthetic components — Part 2: Description of lower limb prosthetic components C
ISO 13405-3:2015 Prosthetics and orthotics — Classification and description of prosthetic components — Part 3: Description of upper limb prosthetic components C
ISO 29783-2:2015 Prosthetics and orthotics — Vocabulary — Part 2: Prosthetic gait A
TC 172 Optics and photonics
ISO 14490-5:2005/Amd 1:2015 * Optics and optical instruments — Test methods for telescopic systems — Part 5: Test methods for transmittance — Amendment 1 XZ
TC 174 Jewellery
ISO 11490:2015 * Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime A
ISO 13756:2015 * Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride A
ISO 15093:2015 * Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES B
TC 190 Soil quality
ISO 11268-3:2014 Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations C
ISO 16198:2015 Soil quality — Plant-based test to assess the environmental bioavailability of trace elements to plants F
TC 193 Natural gas
ISO 20765-2:2015 Natural gas — Calculation of thermodynamic properties — Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application G
TC 204 Intelligent transport systems
ISO 17572-1:2015 * Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 1: General requirements and conceptual model E
ISO 17572-2:2015 * Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 2: Pre-coded location references (pre-coded profile) F
ISO 17572-3:2015 * Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3: Dynamic location references (dynamic profile) H
TC 211 Geographic information/Geomatics
ISO/TS 19130-2:2014 Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and sonar H
TC 213 Dimensional and geometrical product specifications and verification
ISO 14638:2015 Geometrical product specifications (GPS) — Matrix model C
TC 219 Floor coverings
ISO 9405:2015 * Textile floor coverings — Assessment of changes in appearance A
ISO 10361:2015 * Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester B
TC 228 Tourism and related services
ISO 13009:2015 * Tourism and related services — Requirements and recommendations for beach operation E
ISO 13687:2014 Tourism and related services — Yacht harbours — Minimum requirements B
TC 261 Additive manufacturing
ISO 17296-2:2015 * Additive manufacturing — General principles — Part 2: Overview of process categories and feedstock B
TMBG Technical Management Board – groups
IWA 14-1:2013 * Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating F
IWA 14-2:2013 * Vehicle security barriers — Part 2: Application G
IWA 16:2015 * International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport E
CASCO Committee on conformity assessment
ISO/IEC TR 17026:2015 * Conformity assessment — Example of a certification scheme for tangible products E
JTC 1 Information technology
ISO/IEC 10373-2:2015 * Identification cards — Test methods — Part 2: Cards with magnetic stripes E
ISO/IEC 27040:2015 * Information technology — Security techniques — Storage security H
ISO/IEC 15444-1:2004/Amd 8:2015 * Information technology — JPEG 2000 image coding system: Core coding system — Part 1:  — Amendment 8: Profiles for an interoperable master format IMF XZ
ISO/IEC 23001-8:2013/Cor 1:2015 * Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Technical Corrigendum 1 free
ISO/IEC 19395:2015 * Information technology — Sustainability for and by information technology — Smart data centre resource monitoring and control E

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków