ISO.org – normy opublikowane w styczniu 2018 roku
Nowe normy i standardy opublikowane w styczniu 2018 roku:
* Dostępne tylko w języku angielskim
** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim
| Grupa cenowa | |||
| IIW | International Institute of Welding | ||
| ISO/TR 22281:2018 | Welding consumables — International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications | A | |
| TC 5 | Ferrous metal pipes and metallic fittings | ||
| ISO 10804:2018 | * | Restrained joint systems for ductile iron pipelines — Design rules and type testing | A |
| TC 8 | Ships and marine technology | ||
| ISO/PAS 21195:2018 | * | Ships and marine technology — Systems for the detection of persons while going overboard from ships (Man overboard detection) | C |
| ISO 20313:2018 | * | Ships and marine technology — Cathodic protection of ships | G |
| ISO 21005:2018 | * | Ships and marine technology — Thermally toughened safety glass panes for windows and side scuttles | A |
| TC 20 | Aircraft and space vehicles | ||
| ISO 19971:2018 | * | Space systems — Spacecraft and launch vehicle combined operation plan (COP) at launch site — General format | C |
| ISO 20188:2018 | * | Space systems — Product assurance requirements for commercial satellites | E |
| TC 22 | Road vehicles | ||
| ISO 18541-6:2018 | Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements | H | |
| ISO 20077-2:2018 | * | Road Vehicles — Extended vehicle (ExVe) methodology — Part 2: Methodology for designing the extended vehicle |
D |
| ISO 6469-2:2018 | * | Electrically propelled road vehicles — Safety specifications — Part 2: Vehicle operational safety | A |
| TC 23 | Tractors and machinery for agriculture and forestry | ||
| ISO 4254-8:2018 | Agricultural machinery — Safety — Part 8: Solid fertilizer distributors | C | |
| TC 28 | Petroleum and related products, fuels and lubricants from natural or synthetic sources | ||
| ISO 4259-1:2017 | Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test | G | |
| ISO 6743-6:2018 | * | Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (gear systems) | B |
| ISO 12925-1:2018 | * | Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems | F |
| TC 30 | Measurement of fluid flow in closed conduits | ||
| ISO/TR 15377:2018 | * | Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 | E |
| TC 34 | Food products | ||
| ISO 18794:2018 | * | Coffee — Sensory analysis — Vocabulary | A |
| TC 35 | Paints and varnishes | ||
| ISO 6270-3:2018 | * | Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir) | B |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods | B | |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures | D | |
| TC 37 | Language and terminology | ||
| ISO 18841:2018 | * | Interpreting services — General requirements and recommendations | C |
| TC 43 | Acoustics | ||
| ISO 3822-3:2018 | Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances | B | |
| TC 44 | Welding and allied processes | ||
| ISO 20378:2017 | Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification | A | |
| TC 46 | Information and documentation | ||
| ISO 20247:2018 | * | Information and documentation — International library item identifier(ILII) | A |
| TC 58 | Gas cylinders | ||
| ISO 11363-1:2018 | Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specifications | B | |
| TC 60 | Gears | ||
| ISO/TS 6336-21:2017 | Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method | F | |
| ISO/TR 6336-30:2017 | Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 | G | |
| TC 67 | Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries | ||
| ISO 24817:2017 | * | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection | H |
| TC 76 | Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use | ||
| ISO 8871-3:2003/Amd 1:2018 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count — Amendment 1 | XZ | |
| TC 79 | Light metals and their alloys | ||
| ISO 7599:2018 | * | Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium | D |
| TC 83 | Sports and other recreational facilities and equipment | ||
| ISO 23537-1:2016/Amd 1:2018 | * | Requirements for sleeping bags — Part 1: Thermal and dimensional requirements — Amendment 1 | XZ |
| TC 84 | Devices for administration of medicinal products and catheters | ||
| ISO 10555-1:2013/Amd 1:2017 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1 | XZ | |
| TC 91 | Surface active agents | ||
| ISO 19619:2018 | * | Surface active agents — Determination of free propylene oxide content in propylene oxide adduct surfactants — GC method | B |
| TC 94 | Personal safety — Personal protective equipment | ||
| ISO 18639-1:2018 | * | PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General | C |
| ISO 18639-3:2018 | * | PPE ensembles for firefighters undertaking specific rescue activities — Part 3: Clothing | C |
| ISO 18639-6:2018 | * | PPE ensembles for firefighters undertaking specific rescue activities — Part 6: Footwear | C |
| ISO/TR 19591:2018 | * | Personal protective equipment for firefighters — Standard terms and definitions | A |
| TC 106 | Dentistry | ||
| ISO 21533:2018 | Dentistry — Reprocessable cartridge syringes for intraligamentary injections | B | |
| ISO 19448:2018 | Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode | B | |
| ISO 20126:2012/Amd 1:2018 | Dentistry — Manual toothbrushes — General requirements and test methods — Amendment 1 | XZ | |
| TC 108 | Mechanical vibration, shock and condition monitoring | ||
| ISO/TS 14837-31:2017 | Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings | F | |
| ISO/TR 18570:2017 | Mechanical vibration — Measurement and evaluation of human exposure to hand transmitted vibration — Supplementary method for assessing risk of vascular disorders | C | |
| ISO 17359:2018 | Condition monitoring and diagnostics of machines — General guidelines | E | |
| ISO 29821:2018 | * | Condition monitoring and diagnostics of machines — Ultrasound — General guidelines, procedures and validation | D |
| TC 120 | Leather | ||
| ISO 17551:2018 | * | Leather — Pickled sheep pelts — Guidelines for grading on the basis of defect and size | A |
| TC 121 | Anaesthetic and respiratory equipment | ||
| ISO 11195:2018 | * | Gas mixers for medical use — Stand-alone gas mixers | D |
| ISO 15002:2008/Amd 1:2018 | Flow-metering devices for connection to terminal units of medical gas pipeline systems — Amendment 1 | XZ | |
| TC 127 | Earth-moving machinery | ||
| ISO 13031:2016 | Earth-moving machinery — Quick couplers — Safety | B | |
| TC 130 | Graphic technology | ||
| ISO 12636:2018 | * | Graphic technology — Blankets for offset printing | B |
| ISO 17972-4:2018 | * | Graphic technology — Colour data exchange format (CxF/X) — Part 4: Spot colour characterisation data (CxF/X-4) | C |
| ISO 20654:2017 | * | Graphic technology — Measurement and calculation of spot colour tone value | A |
| ISO 20690:2018 | * | Graphic technology — Determination of the operating power consumption of digital printing devices | D |
| TC 132 | Ferroalloys | ||
| ISO 6467:2018 | * | Ferrovanadium — Determination of vanadium content — Potentiometric method | B |
| TC 138 | Plastics pipes, fittings and valves for the transport of fluids | ||
| ISO 161-1:2018 | * | Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series | A |
| ISO 4065:2018 | * | Thermoplastics pipes — Universal wall thickness table | B |
| ISO 11922-1:2018 | * | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series | C |
| ISO 11296-2:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes | B | |
| ISO 11296-4:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes | F | |
| ISO 11297-2:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes | B | |
| ISO 11297-4:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes | B | |
| ISO 11298-2:2018 | Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes | B | |
| TC 146 | Air quality | ||
| ISO 12219-6:2017 | Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method | C | |
| ISO 12219-7:2017 | Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements | D | |
| TC 147 | Water quality | ||
| ISO/TS 19620:2018 | * | Water quality — Determination of arsenic(III) and arsenic(V) species — Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS) | F |
| ISO 20595:2018 | Water quality — Determination of selected highly volatile organic compounds in water — Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) | D | |
| TC 150 | Implants for surgery | ||
| ISO/TR 14283:2018 | * | Implants for surgery — Essential principles of safety and performance | D |
| ISO 19090:2018 | * | Tissue-engineered medical products — Bioactive ceramics — Method to measure cell migration in porous materials | E |
| TC 155 | Nickel and nickel alloys | ||
| ISO 11437:2018 | * | Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method | C |
| TC 164 | Mechanical testing of metals | ||
| ISO 26203-1:2018 | Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems | E | |
| ISO 6507-1:2018 | * | Metallic materials — Vickers hardness test — Part 1: Test method | E |
| ISO 6507-2:2018 | * | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines | C |
| ISO 6507-3:2018 | * | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks | C |
| ISO 15653:2018 | Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds | F | |
| TC 172 | Optics and photonics | ||
| ISO 14889:2013/Amd 1:2017 | Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses — Amendment 1 | XZ | |
| TC 173 | Assistive products for persons with disability | ||
| ISO 16840-2:2018 | * | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity | E |
| TC 193 | Natural gas | ||
| ISO 20729:2017 | Natural gas — Determination of sulfur compounds — Determination of total sulfur content by ultraviolet fluorescence method | B | |
| TC 198 | Sterilization of health care products | ||
| ISO 11737-1:2018 | Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products | F | |
| ISO 13408-2:2018 | Aseptic processing of health care products — Part 2: Sterilizing filtration | E | |
| TC 204 | Intelligent transport systems | ||
| ISO 13143-2:2016 | Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 2: Abstract test suite | C | |
| ISO/TR 16401-1:2018 | * | Electronic fee collection — Evaluation of equipment for conformity to ISO/TS 17575-2 — Part 1: Test suite structure and test purposes | H |
| ISO/TR 16401-2:2018 | * | Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-2 — Part 2: Abstract test suite | B |
| ISO/TS 21719-1:2018 | * | Electronic fee collection — Personalization of on-board equipment (OBE) — Part 1: Framework | B |
| ISO/TS 21719-2:2018 | * | Electronic fee collection — Personalization of on-board equipment (OBE) — Part 2: Using dedicated short-range communication | F |
| TC 211 | Geographic information/Geomatics | ||
| ISO 19157:2013/Amd 1:2018 | * | Geographic information — Data quality — Amendment 1: Describing data quality using coverages | XZ |
| TC 215 | Health informatics | ||
| ISO/IEEE 11073-10424:2016/Cor 1:2018 | * | Health informatics — Personal health device communication — Part 10424: Device specialization — Sleep apnoea breathing therapy equipment (SABTE) — Technical Corrigendum 1 | free |
| ISO 11615:2017 | Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated medicinal product information | G | |
| ISO 11616:2017 | Health informatics — Identification of medicinal products — Data elements and structures for unique identification and exchange of regulated pharmaceutical product information | E | |
| TC 228 | Tourism and related services | ||
| ISO 20410:2017 | Tourism and related services — Bareboat charter — Minimum service and equipment requirements | C | |
| TC 249 | Traditional chinese medicine | ||
| ISO 21371:2018 | * | Traditional Chinese medicine — Labelling requirements of products intended for oral or topical use | A |
| TC 276 | Biotechnology | ||
| ISO 20391-1:2018 | * | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods | C |
| TMBG | Technical Management Board – groups | ||
| ISO/IEC 80079-20-1:2017 | * | Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data | H |
| JTC 1 | Information technology | ||
| ISO/IEC 20243-2:2018 | * | Information technology — Open Trusted Technology ProviderTM Standard (O-TTPS) — Mitigating maliciously tainted and counterfeit products — Part 2: Assessment procedures for the O-TTPS and ISO/IEC 20243-1:2018 | E |
| ISO/IEC TR 20547-2:2018 | * | Information technology — Big data reference architecture — Part 2: Use cases and derived requirements | H |
| ISO/IEC 24570:2018 | * | Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis | G |
| ISO/IEC/IEEE 8802-1Q:2016/Amd 2:2018 | * | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and bridged networks — Amendment 2: Application virtual local area network (VLAN) type, length, value (TLV) | H |
| ISO/IEC TR 29110-5-3:2018 | * | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-3: Service delivery guidelines | E |
| ISO/IEC 19286:2018 | * | Identification cards — Integrated circuit cards — Privacy-enhancing protocols and services | G |
| ISO/IEC TR 14369:2018 | * | Information technology — Programming languages, their environments and system software interfaces — Guidelines for the preparation of language-independent service specifications (LISS) | G |
| ISO/IEC 23000-16:2018 | * | Information technology — Multimedia application format (MPEG-A) — Part 16: Publish/Subscribe Application Format | E |
| ISO/IEC 23000-19:2018 | * | Information technology — Multimedia application format (MPEG-A) — Part 19: Common media application format (CMAF) for segmented media | H |
| ISO/IEC TR 24741:2018 | * | Information technology — Biometrics — Overview and application | E |
