IKMJ |ISO.org – normy opublikowane w styczniu 2019 roku | | IKMJ | IKMJ |ISO.org – normy opublikowane w styczniu 2019 roku | ISO.org – normy opublikowane w styczniu 2019 roku – IKMJ | ISO.org – normy opublikowane w styczniu 2019 roku – IKMJ |
Nowa norma ISO

ISO.org – normy opublikowane w styczniu 2019 roku

Nowe normy i standardy opublikowane w styczniu 2019 roku:
1 opóźniona publikacja wersji językowej
2 poprawiona wersja
3 wielojęzyczny dokument

 

 

Grupa cenowa

 

TC 6 Paper, board and pulps
ISO/TR 24498:2019 en Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons

B

TC 17 Steel
ISO 683-3:2019 en

fr

Heat-treatable steels, alloy steels and free-cutting steels — Part 3: Case-hardening steels

F

ISO 5952:2019 en Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance

B

TC 22 Road vehicles
ISO 15118-4:2018 fr1 Road vehicles — Vehicle to grid communication interface — Part 4: Network and application protocol conformance test

H

ISO 11452-2:2019 en Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure

F

ISO 19642-2:2019 en Road vehicles — Automotive cables — Part 2: Test methods

G

ISO 19642-3:2019 en Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables

C

ISO 19642-4:2019 en Road vehicles — Automotive cables — Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables

C

ISO 19642-5:2019 en Road vehicles — Automotive cables — Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables

C

ISO 19642-6:2019 en Road vehicles — Automotive cables — Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor cables

C

ISO 19642-7:2019 en Road vehicles — Automotive cables — Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

C

ISO 19642-8:2019 en Road vehicles — Automotive cables — Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

C

ISO 19642-9:2019 en Road vehicles — Automotive cables — Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

C

ISO 19642-10:2019 en Road vehicles — Automotive cables — Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

C

ISO/PAS 21448:2019 en Road vehicles — Safety of the intended functionality

G

ISO 15037-1:2019 en Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars

D

TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-12:2019 en

fr

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services

E

TC 24 Particle characterization including sieving
ISO 3310-1:2016 fr1 Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth

C

TC 29 Small tools
ISO/TS 13399-301:2013 fr1 Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

D

ISO/TS 13399-302:2013 fr1 Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

F

ISO/TS 13399-304:2016 fr1 Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole

E

ISO/TS 13399-305:2017 fr1 Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring

G

ISO/TS 13399-406:2019 en Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface

F

ISO 22180:2019 en

fr

CVD diamond tools — Categorization

C

TC 30 Measurement of fluid flow in closed conduits
ISO 14511:2019 en Measurement of fluid flow in closed conduits — Thermal mass flowmeters

E

TC 34 Food products
ISO 21446:2019 en Infant formula and adult nutritionals — Determination of trans and total (cis + trans) vitamin K1 content — Normal phase HPLC

D

TC 38 Textiles
ISO 18692-2:2019 en

fr

Fibre ropes for offshore stationkeeping — Part 2: Polyester

B

ISO 20921:2019 en Textiles — Determination of stable nitrogen isotope ratio in cotton fibres

B

ISO 2370:2019 en

fr

Textiles — Determination of fineness of flax fibres — Permeametric methods

C

TC 39 Machine tools
ISO/TR 17243-1:2014 fr1 Machine tool spindles — Evaluation of machine tool spindle vibrations by measurements on spindle housing — Part 1: Spindles with rolling element bearings and integral drives operating at  speeds between 600 min-1 and 30 000 min-1

C

ISO/TR 17243-2:2017 fr1 Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min

C

TC 43 Acoustics
ISO 17201-3:2019 en Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations

G

TC 44 Welding and allied processes
ISO 5178:2019 en Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints

A

ISO/TR 23413:2019 en

fr

Resistance welding — Overview of standards for resistance welding

B

ISO 5175-2:2017 en2

fr2

Gas welding equipment — Safety devices — Part 2: Devices not incorporating a flame (flashback) arrestor

B

ISO 24394:2018 fr1 Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components

F

TC 45 Rubber and rubber products
ISO/TS 22762-4:2019 en Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3

E

TC 46 Information and documentation
ISO 30301:2019 en Information and documentation — Management systems for records — Requirements

C

TC 58 Gas cylinders
ISO 16964:2019 en Gas cylinders — Flexible hoses assemblies — Specification and testing

C

TC 60 Gears
ISO/TS 6336-4:2019 en Calculation of load capacity of spur and helical gears — Part 4: Calculation of tooth flank fracture load capacity

E

TC 61 Plastics
ISO 21301-1:2019 en

fr

Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 21301-2:2019 en

fr

Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

B

ISO 17422:2018 fr1 Plastics — Environmental aspects — General guidelines for their inclusion in standards

B

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 16812:2019 en Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers

A

TC 69 Applications of statistical methods
ISO 16355-3:2019 en Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder

F

TC 70 Internal combustion engines
ISO 8178-3:2019 en Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter

B

TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 13315-8:2019 en Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations

D

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 11040-6:2019 en Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling

G

TC 83 Sports and other recreational facilities and equipment
ISO 20740:2019 en

fr

Martial arts — Wushu Taiji sword — Requirements and test method

B

TC 84 Devices for administration of medicinal products and catheters
ISO 23907-1:2019 en

fr

Sharps injury protection — Requirements and test methods — Part 1: Single-use sharps containers

B

TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 4037-1:2019 en

fr

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteristics and production methods

F

ISO 4037-2:2019 en

fr

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

E

ISO 4037-3:2019 en

fr

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

G

ISO 4037-4:2019 en

fr

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

C

ISO 8299:2019 en Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry

D

ISO 9463:2019 en Nuclear energy — Nuclear fuel technology — Determination of plutonium in nitric acid solutions by spectrophotometry

B

ISO 18256-1:2019 en Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 1: Dissolution of plutonium dioxide powders

B

ISO 18256-2:2019 en Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 2: Dissolution of MOX pellets and powders

B

ISO 10979:2019 en Identification of fuel assemblies for nuclear power reactors

A

TC 87 Cork
ISO 633:2019 en
fr3
Cork — Vocabulary

A

TC 91 Surface active agents
ISO 21703:2019 en Surface active agents — Microbiology — Microbiological test methods for liquid hand dishwashing

D

TC 92 Fire safety
ISO 3008-1:2019 en Fire resistance tests — Door and shutter assemblies — Part 1: General requirements

G

TC 105 Steel wire ropes
ISO 19427:2019 en

fr

Steel wire ropes — Pre-fabricated parallel wire strands for suspension bridge main cable — Specifications

C

TC 106 Dentistry
ISO/TR 22710:2019 en Dentistry — Vocabulary of process chain from dental CT to CAD/CAM for implant prosthetic restorations — Backward planning in the digital process chain

A

TC 107 Metallic and other inorganic coatings
ISO 10111:2019 en

fr

Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods

B

ISO 6158:2018 fr1 Metallic and other inorganic coatings — Electrodeposited coatings of chromium for engineering purposes

C

TC 108 Mechanical vibration, shock and condition monitoring
ISO 10819:2013/Amd 1:2019 en

fr

Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand — Amendment 1

XZ

TC 112 Vacuum technology
ISO 20146:2019 en

fr

Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges

C

ISO 21360-3:2019 en

fr

Vacuum technology — Standard methods for measuring vacuum pump performance — Part 3: Specific parameters for mechanical booster vacuum pumps

C

TC 115 Pumps
ISO/ASME 14414:2019 en

fr

Pump system energy assessment

G

ISO/TR 19688:2019 en Rotodymanic pumps — Hydraulic performance acceptance test using a model pump

F

TC 121 Anaesthetic and respiratory equipment
ISO 10524-3:2019 en

fr

Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves (VIPRs)

F

TC 122 Packaging
ISO 20848-3:2018 fr1 Packaging — Plastics drums — Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l

D

TC 123 Plain bearings
ISO 22423:2019 en Foil bearings — Performance testing of foil thrust bearings  — Testing of static load capacity, bearing torque, friction coefficient and lifetime

C

TC 127 Earth-moving machinery
ISO 19014-1:2018 en2

fr2

Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety-related parts of the control system and performance requirements

D

TC 131 Fluid power systems
ISO 6301-2:2018 fr1 Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier’s literature

A

ISO 11943:2018 fr1 Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation

E

TC 135 Non-destructive testing
ISO 16836:2019 en Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete

B

ISO 16837:2019 en Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams

A

ISO 16838:2019 en Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures

A

TC 136 Furniture
ISO 7175-1:2019 en Furniture — Children’s cots and folding cots for domestic use — Part 1: Safety requirements

B

ISO 7175-2:2019 en Furniture — Children’s cots and folding cots for domestic use — Part 2: Test methods

E

TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 11296-7:2019 en

fr

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes

C

TC 146 Air quality
ISO 16000-37:2019 en Indoor air — Part 37: Measurement of PM2,5 mass concentration

B

ISO 16000-38:2019 en Indoor air — Part 38: Determination of amines in indoor and test chamber air — Active sampling on samplers containing phosphoric acid impregnated filters

B

TC 147 Water quality
ISO 7027-2:2019 en

fr

Water quality — Determination of turbidity — Part 2: Semi-quantitative methods for the assessment of transparency of waters

B

TC 150 Implants for surgery
ISO 14242-3:2009/Amd 1:2019 en

fr

Implants for surgery — Wear of total hip-joint prostheses — Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test — Amendment 1

XZ

TC 165 Timber structures
ISO 22157:2019 en Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods

D

TC 171 Document management applications
ISO 8126:2019 en Micrographics — Duplicating film, silver, diazo and vesicular  — Specifications and measurement for visual density

A

TC 172 Optics and photonics
ISO/TR 20772:2018 fr1 Ophthalmic optics — Spectacle lenses — Short wavelength visible solar radiation and the eye

E

TC 173 Assistive products
ISO 21802:2019 en Assistive products — Guidelines on cognitive accessibility — Daily time management

D

ISO 23599:2019 en Assistive products for blind and vision-impaired persons — Tactile walking surface indicators

F

TC 178 Lifts, escalators and moving walks
ISO 8102-6:2019 en Electrical requirements for lifts, escalators and moving walks — Part 6: Programmable electronic systems in safety-related applications for escalators and moving walks (PESSRAE)

D

TC 182 Geotechnics
ISO 14689:2017 fr1 Geotechnical investigation and testing — Identification, description and classification of rock

D

ISO 17892-11:2019 en Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests

D

ISO 22476-15:2016 fr1 Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling

D

TC 184 Automation systems and integration
ISO 18828-5:2019 en Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 5: Manufacturing change management

E

TC 198 Sterilization of health care products
ISO 11607-1:2019 en

fr

Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems

F

ISO 11607-2:2019 en

fr

Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes

C

TC 199 Safety of machinery
ISO 19353:2019 en

fr

Safety of machinery — Fire prevention and fire protection

F

TC 201 Surface chemical analysis
ISO 18516:2019 en Surface chemical analysis — Determination of lateral resolution and sharpness in beam based methods with a range from nanometres to micrometres

G

TC 204 Intelligent transport systems
ISO 14827-3:2019 en Transport information and control systems — Data interfaces between centres for transport information and control systems — Part 3: Data interfaces between centres for intelligent transport sytems (ITS) using XML (Profile A)

E

ISO 20035:2019 en Intelligent transport systems — Cooperative adaptive cruise control systems (CACC) — Performance requirements and test procedures

C

ISO/TR 21718:2019 en Intelligent transport systems — Spatio-temporal data dictionary for cooperative ITS and automated driving systems 2.0

H

ISO 29281-2:2019 en Intelligent transport systems — Localized communications — Part 2: Legacy system support

E

TC 206 Fine ceramics
ISO 21814:2019 en Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of aluminium nitride powders

F

TC 211 Geographic information/Geomatics
ISO 19111:2019 en Geographic information — Referencing by coordinates

H

ISO 19115-2:2019 en

fr

Geographic information — Metadata — Part 2: Extensions for acquisition and processing

G

ISO 19150-2:2015/Amd 1:2019 en

fr

Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language (OWL) — Amendment 1

XZ

TC 216 Footwear
ISO 20150:2019 en

fr

Footwear and footwear components — Quantitative challenge test method to assess antifungal activity

B

TC 217 Cosmetics
ISO 11930:2019 en

fr

Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product

D

TC 249 Traditional Chinese medicine
ISO/TR 20498-5:2019 en Traditional Chinese medicine — Computerized tongue image analysis system — Part 5: Method of acquisition and expression of tongue colour and tongue coating colour

C

TC 265 Carbon dioxide capture, transportation, and geological storage
ISO 27916:2019 en

fr

Carbon dioxide capture, transportation and geological storage — Carbon dioxide storage using enhanced oil recovery (CO2-EOR)

G

TC 269 Railway applications
ISO/TR 21245:2018 fr1 Railway applications — Railway project planning process — Guidance on railway project planning

E

TC 274 Light and lighting
ISO/CIE 20086:2019 en Light and lighting — Energy performance of lighting in buildings

G

TC 292 Security and resilience
ISO 22315:2014 fr1 Societal security — Mass evacuation — Guidelines for planning

D

ISO/TS 22331:2018 fr1 Security and resilience — Business continuity management systems — Guidelines for business continuity strategy

D

ISO 22397:2014 fr1 Societal security — Guidelines for establishing partnering arrangements

C

CASCO Committee on conformity assessment
ISO/IEC TS 17021-8:2019 en Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 8: Competence requirements for auditing and certification of management systems for sustainable development in communities

B

JTC 1 Information technology
ISO/IEC 20933:2019 en Information technology — Distributed application platforms and services (DAPS) — Framework for distributed real-time access systems

E

ISO/IEC 10646:2017/Amd 1:2019 en Information technology — Universal Coded Character Set (UCS) — Amendment 1: Dogra, Gunjala Gondi, Makasar, Medefaidrin, Indic Siyaq Numbers and other characters

H

ISO/IEC 14651:2019 en

fr

Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering

G

ISO/IEC 18520:2019 en

 

Information technology — Computer graphics, image processing and environmental data representation — Benchmarking of vision-based spatial registration and tracking methods for mixed and augmented reality (MAR)

G

ISO/IEC 9798-3:2019 en IT Security techniques — Entity authentication — Part 3: Mechanisms using digital signature techniques

D

ISO/IEC 19086-4:2019 en Cloud computing — Service level agreement (SLA) framework — Part 4: Components of security and of protection of PII

D

ISO/IEC TS 27008:2019 en Information technology — Security techniques — Guidelines for the assessment of information security controls

H

ISO/IEC 27018:2019 en Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors

D

ISO/IEC 14496-15:2017/Amd 2:2019 en Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format — Amendment 2: Support for additional brands

XZ

ISO/IEC 14496-22:2019 en Information technology — Coding of audio-visual objects — Part 22: Open Font Format

H

ISO/IEC 23000-19:2018/Amd 2:2019 en Information technology — Multimedia application format (MPEG-A) — Part 19: Common media application format (CMAF) for segmented media — Amendment 2: XHE-AAC and other media profiles

XZ

ISO/IEC 23001-14:2019 en Information technology — MPEG systems technologies — Part 14: Partial file format

D

ISO/IEC 23008-9:2019 en Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 9: 3D Audio conformance testing

H

ISO/IEC 23090-2:2019 en Information technology — Coded representation of immersive media — Part 2: Omnidirectional media format

H

ISO/IEC TR 22678:2019 en Information technology — Cloud computing — Guidance for policy development

E

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości


Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków