Zobacz nowe normy (październik 2014)! | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w październiku 2014 | ISO.org – normy opublikowane w październiku 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w październiku 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w październiku 2014

Nowe normy międzynarodowe opublikowane od 1 do 31 października 2014

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

 

PC 259 Outsourcing
ISO 37500:2014 Guidance on outsourcing
TC 8 Ships and marine technology
ISO 17325-2:2014 Ships and marine technology — Marine environment protection — Oil booms — Part 2: Strength and performance requirements
ISO 18309:2014 Ships and marine technology — Incinerator sizing and selection — Guidelines
ISO 17907:2014 Ships and marine technology — Single point mooring arrangements for conventional tankers
ISO 18289:2014 Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches
ISO 18296:2014 Ships and marine technology — Ship-shifting winches
ISO 16556:2014 Large yachts — Deck equipment — Anchoring equipments
TC 17 Steel
ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
TC 20 Aircraft and space vehicles
ISO 27027:2014 Aerospace — Solid-state remote power controllers — General performance requirements
ISO 16919:2014 Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
TC 22 Road vehicles
ISO 15007-1:2014 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-3:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer
TC 28 Petroleum products and lubricants
ISO 10370:2014 Petroleum products — Determination of carbon residue — Micro method
ISO 17315:2014 Petroleum products and other liquids — Ethanol — Determination of total acidity by potentiometric titration
TC 29 Small tools
ISO 26623-1:2014 Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
ISO 26623-2:2014 Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
TC 31 Tyres, rims and valves
ISO 14960-1:2014 Tubeless tyres — Valves and components — Part 1: Test methods
ISO 14960-2:2014 Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method
TC 34 Food products
ISO 11133:2014 Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media
ISO 22004:2014 Food safety management systems — Guidance on the application of ISO 22000
ISO 2451:2014 Cocoa beans — Specification
TC 35 Paints and varnishes
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 16474-3:2013 Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
TC 36 Cinematography
ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
ISO 7832:2014 Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration
TC 37 Terminology and other language and content resources
ISO 24156-1:2014 Graphic notations for concept modelling in terminology work and its relationship with UML — Part 1: Guidelines for using UML notation in terminology work
TC 39 Machine tools
ISO/TR 17529:2014 Machine tools — Practical guidance and example of risk assessment on electro-discharge machines
TC 45 Rubber and rubber products
ISO 815-1:2014 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
ISO 1656:2014 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
ISO 2302:2014 Isobutene-isoprene rubber (IIR) — Evaluation procedure
TC 46 Information and documentation
ISO 10161-2:2014 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma
ISO 21127:2014 Information and documentation — A reference ontology for the interchange of cultural heritage information
ISO/TR 26122:2008 Information and documentation — Work process analysis for records
TC 51 Pallets for unit load method of materials handling
ISO 18613:2014 Pallets for materials handling — Repair of flat wooden pallets
TC 58 Gas cylinders
ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
TC 60 Gears
ISO/TR 15144-2:2014 Calculation of micro-pitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting
TC 61 Plastics
ISO 17855-1:2014 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
TC 69 Applications of statistical methods
ISO 22514-8:2014 Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process
TC 83 Sports and other recreational facilities and equipment
ISO 9462:2014 Alpine ski-bindings — Requirements and test methods
ISO 13992:2014 Alpine touring ski-bindings — Requirements and test methods
TC 84 Devices for administration of medicinal products and catheters
ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires
TC 87 Cork
ISO 7322:2014 Composition cork — Test methods
TC 94 Personal safety — Protective clothing and equipment
ISO 16900-1:2014 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage
TC 96 Cranes
ISO 9928-2:2014 Cranes — Crane operating manual — Part 2: Mobile cranes
ISO 11662-2:2014 Mobile cranes — Experimental determination of crane performance — Part 2: Structural competence under static loading
TC 106 Dentistry
ISO 13116:2014 Dentistry — Test Method for Determining Radio-Opacity of Materials
ISO 9680:2014 Dentistry — Operating lights
ISO 17730:2014 Dentistry — Fluoride varnishes
TC 110 Industrial trucks
ISO 22915-9:2014 Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
TC 114 Horology
ISO 10552:2014 Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions
TC 121 Anaesthetic and respiratory equipment
ISO 5367:2014 Anaesthetic and respiratory equipment — Breathing sets and connectors
ISO 8836:2014 Suction catheters for use in the respiratory tract
TC 126 Tobacco and tobacco products
ISO 10315:2013 Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method
ISO/TR 19478-1:2014 ISO and Health Canada intense smoking parameters — Part 1: Results of an international machine smoking study
TC 131 Fluid power systems
ISO 6358-3:2014 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems
TC 145 Graphical symbols
ISO 9186-3:2014 Graphical symbols — Test methods — Part 3: Method for testing symbol referent association
TC 149 Cycles
ISO 4210-4:2014 Cycles — Safety requirements for bicycles — Part 4: Braking test methods
ISO 4210-6:2014 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods
ISO 4210-8:2014 Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
TC 150 Implants for surgery
ISO 14242-1:2014 Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14243-3:2014 Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
TC 164 Mechanical testing of metals
ISO 16842:2014 Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
TC 168 Prosthetics and orthotics
ISO 8549-4:2014 Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation
TC 172 Optics and photonics
ISO 9022-4:2014 Optics and photonics — Environmental test methods — Part 4: Salt mist
ISO 17328:2014 Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials
ISO 14490-6:2014 Optics and photonics — Test methods for telescopic systems — Part 6: Test methods for veiling glare index
TC 173 Assistive products for persons with disability
ISO 7176-1:2014 Wheelchairs — Part 1: Determination of static stability
ISO 17069:2014 Accessible design — Consideration and assistive products for accessible meeting
TC 174 Jewellery
ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide
TC 181 Safety of toys
ISO 8124-4:2014 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 13547-1:2014 Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
TC 184 Automation systems and integration
ISO 22400-1:2014 Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations management — Part 1: Overview, concepts and terminology
TC 190 Soil quality
ISO 11268-3:2014 Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations
TC 198 Sterilization of health care products
ISO 11140-1:2014 Sterilization of health care products — Chemical indicators — Part 1: General requirements
TC 202 Microbeam analysis
ISO 14594:2014 Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
ISO 14595:2014 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)
TC 204 Intelligent transport systems
ISO/TS 16785:2014 Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and external in-vehicle devices
ISO/TR 17465-1:2014 Intelligent transport systems — Cooperative ITS — Part 1: Terms and definitions
ISO 29281-2:2013/Amd 1:2014 Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 2: Legacy system support — Amendment 1
TC 215 Health informatics
ISO/TR 14639-2:2014 Health informatics — Capacity-based eHealth architecture roadmap — Part 2: Architectural components and maturity model
TC 217 Cosmetics
ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS
TC 218 Timber
ISO 13061-1:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests
ISO 13061-2:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests
TC 223 Societal security
ISO 22300:2012 Societal security — Terminology
TC 228 Tourism and related services
ISO 13687:2014 Tourism and related services — Yacht harbours — Minimum requirements
TC 242 Energy Management
ISO 50003:2014 Energy management systems — Requirements for bodies providing audit and certification of energy management systems
TC 261 Additive manufacturing
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
ISO 17296-4:2014 Additive manufacturing — General principles — Part 4: Overview of data processing
CASCO Committee on conformity assessment
ISO/IEC TS 17021-7:2014 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road traffic safety management systems
JTC 1 Information technology
ISO/IEC 8824-3:2008/Cor 1:2014 Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification — Part 3: — Technical Corrigendum 1
ISO/IEC 10373-5:2014 Identification cards — Test methods — Part 5: Optical memory cards
ISO/IEC 11694-5:2014 Identification cards — Optical memory cards — Linear recording method — Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
ISO/IEC TR 11801-9901:2014 Information technology — Generic cabling for customer premises — Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
ISO/IEC 24775-1:2014 Information technology — Storage management — Part 1: Overview
ISO/IEC 24775-2:2014 Information technology — Storage management — Part 2: Common Architecture
ISO/IEC 24775-3:2014 Information technology — Storage management — Part 3: Common Profiles
ISO/IEC 24775-4:2014 Information technology — Storage management — Part 4: Block Devices
ISO/IEC 27000:2014 Information technology — Security techniques — Information security management systems — Overview and vocabulary
ISO/IEC 14496-18:2004/Amd 1:2014 Information technology — Coding of audio-visual objects — Part 18: Font compression and streaming — Amendment 1: Updated semantics of decoderSpecificInfo and font data description for ISOBMFF
ISO/IEC 17788:2014 Information technology — Cloud computing — Overview and vocabulary
ISO/IEC 17789:2014 Information technology — Cloud computing — Reference architecture

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków