Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane we wrześniu 2015 | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane we wrześniu 2015 | ISO.org – normy opublikowane we wrześniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane we wrześniu 2015 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane we wrześniu 2015

Nowe normy i standardy opublikowane we wrześniu 2015 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
PC 248 Sustainability criteria for bioenergy
ISO 13065:2015 * Sustainability criteria for bioenergy G
TC 4 Rolling bearings
ISO 104:2015 * Rolling bearings — Thrust bearings — Boundary dimensions, general plan D
TC 8 Ships and marine technology
ISO 6218:2015 Inland navigation vessels — Manually- and power-operated coupling devices for pushing units and coupled vessels — Safety requirements and main dimensions C
ISO 6042:2015 * Ships and marine technology — Weathertight single-leaf steel doors B
ISO 17939:2015 * Ships and marine technology — Oil tank hatches C
ISO 17940:2015 * Ships and marine technology — Hinged watertight doors B
TC 17 Steel
ISO 16574:2015 * Determination of percentage of resolvable pearlite in high carbon steel wire rod A
ISO 4990:2015 * Steel castings — General technical delivery requirements C
ISO 4993:2015 * Steel and iron castings — Radiographic testing C
ISO 9477:2015 * High strength cast steels for general engineering and structural purposes A
ISO 11972:2015 * Corrosion-resistant cast steels for general applications B
ISO 11973:2015 * Heat-resistant cast steels and alloys for general applications A
ISO 13583-1:2015 * Centrifugally cast steel and alloy products — Part 1: General testing and tolerances B
ISO 13583-2:2015 * Centrifugally cast steel and alloy products — Part 2: Heat-resistant materials B
ISO 19960:2015 * Cast steels and alloys with special physical properties B
TC 20 Aircraft and space vehicles
ISO 19631:2015 * Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification specification D
ISO 16679:2015 * Space systems — Relative motion analysis elements after LV/SC separation B
ISO/TR 19473:2015 * Space systems — Best practices for orbit elements at payload — LV separation B
TC 22 Road vehicles
ISO 8820-3:2015 * Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) C
ISO 6469-4:2015 * Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical safety C
TC 23 Tractors and machinery for agriculture and forestry
ISO 5131:2015 * Tractors for agriculture and forestry — Measurement of noise at the operator’s position — Survey method C
ISO 7216:2015 * Agricultural and forestry tractors — Measurement of noise emitted when in motion A
ISO 16230-1:2015 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements C
ISO 16231-2:2015 Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures D
ISO 11783-10:2015 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange H
TC 27 Solid mineral fuels
ISO 5074:2015 * Hard coal — Determination of Hardgrove grindability index A
TC 28 Petroleum products and related products of synthetic or biological origin
ISO 20844:2015 Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle B
TC 31 Tyres, rims and valves
ISO 4000-1:2015 Passenger car tyres and rims — Part 1: Tyres (metric series) G
ISO 23671:2015 Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres C
ISO 10231:2003/Amd 1:2015 Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1 XZ
TC 34 Food products
ISO 10519:2015 Rapeseed — Determination of chlorophyll content — Spectrometric method A
ISO 21415-2:2015 Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means C
ISO 7218:2007/Amd 1:2013 * Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1 G
ISO 18743:2015 Microbiology of the food chain — Detection of Trichinella larvae in meat by artificial digestion method C
ISO/TS 18867:2015 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis E
ISO 17780:2015 Animal and vegetable fats and oils — Determination of aliphatic hydrocarbons in vegetable oils E
TC 38 Textiles
ISO 18782:2015 * Textiles — Determination of dynamic hygroscopic heat generation C
ISO 17608:2015 Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swimming-pool water) B
TC 41 Pulleys and belts (including veebelts)
ISO 9563:2015 Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method A
ISO 19347:2015 * Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys D
TC 43 Acoustics
ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories G
TC 44 Welding and allied processes
ISO 14172:2015 Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification D
ISO 17643:2015 Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis C
TC 45 Rubber and rubber products
ISO 5772:2015 * Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification D
ISO 8308:2015 Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and tubing walls B
ISO 289-1:2015 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity C
ISO 19050:2015 * Rubber, raw, vulcanised — Determination of metal content by ICP-OES B
ISO 1126:2015 Rubber compounding ingredients — Carbon black — Determination of loss on heating B
ISO 8312:2015 * Rubber compounding ingredients — Stearic acid — Definition and test methods D
ISO 19043:2015 * Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method A
ISO 20299-1:2015 Film for wrapping rubber bales — Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) A
ISO 7229:2015 Rubber- or plastics-coated fabrics — Measurement of gas permeability C
TC 58 Gas cylinders
ISO 14456:2015 * Gas cylinders — Gas properties and associated classification (FTSC) codes C
ISO 16964:2015 * Gas cylinders — Flexible hoses assemblies — Specification and testing C
ISO 11118:2015 Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods E
TC 61 Plastics
ISO 16012:2015 Plastics — Determination of linear dimensions of test specimens B
ISO 6721-10:2015 * Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer D
ISO 18263-1:2015 * Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specification A
ISO 10364:2015 * Structural adhesives — Determination of the pot life (working life) of multi-component adhesives B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves G
ISO 19901-8:2014 Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations H
TC 72 Textile machinery and accessories
ISO 18599:2015 * Textile machinery and accessories — Strips for water jet solidification A
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 8362-2:2015 Injection containers and accessories — Part 2: Closures for injection vials A
TC 83 Sports and other recreational facilities and equipment
ISO 9838:2015 Alpine and touring ski-bindings — Test soles for ski-binding tests B
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 12749-3:2015 * Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle F
ISO/TS 18090-1:2015 Radiological protection — Characteristics of reference pulsed radiation — Part 1: Photon radiation C
TC 87 Cork
ISO 2031:2015 Granulated cork — Determination of apparent bulk density A
ISO 4708:2015 Composition cork — Gasket material — Test methods B
TC 92 Fire safety
ISO 16733-1:2015 * Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios E
TC 94 Personal safety — Protective clothing and equipment
ISO 12312-1:2013/Amd 1:2015 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1 XZ
ISO 20471:2013 * High visibility clothing — Test methods and requirements D
ISO 16900-7:2015 * Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods B
TC 100 Chains and chain sprockets for power transmission and conveyors
ISO 4347:2015 * Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths D
ISO 15654:2015 * Fatigue test method for transmission precision roller chains and leaf chains F
TC 106 Dentistry
ISO 17937:2015 Dentistry — Osteotome B
ISO 10650:2015 Dentistry — Powered polymerization activators C
ISO 19429:2015 * Dentistry — Designation system for dental implants A
TC 107 Metallic and other inorganic coatings
ISO 2746:2015 Vitreous and porcelain enamels — High voltage test A
TC 108 Mechanical vibration, shock and condition monitoring
ISO 13373-3:2015 * Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis F
ISO 13381-1:2015 * Condition  monitoring and diagnostics of  machines — Prognostics — Part 1: General guidelines
TC 110 Industrial trucks
ISO 22915-24:2015 Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks C
TC 114 Horology
ISO/TS 18684:2015 Timekeeping instruments — Watch external parts made of hard materials — General requirements and test methods B
TC 117 Fans
ISO 13350:2015 Fans — Performance testing of jet fans E
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-72:2015 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients H
TC 123 Plain bearings
ISO 19259:2015 * Plain bearings — Bearings with embedded solid lubricants B
TC 130 Graphic technology
ISO/TR 19300:2015 * Graphic technology — Guidelines for the use of standards for print media production C
TC 131 Fluid power systems
ISO 19973-2:2015 * Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves C
ISO 19973-3:2015 * Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod D
ISO 19973-5:2015 * Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves C
ISO 4393:2015 * Fluid power systems and components — Cylinders — Basic series of piston strokes A
ISO 6432:2015 Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions A
ISO 10767-1:2015 * Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps E
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system H
ISO 17885:2015 Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications F
ISO 18489:2015 * Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method B
TC 146 Air quality
ISO 16258-1:2015 Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 1: Direct-on-filter method D
ISO 16258-2:2015 Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 2: Method by indirect analysis E
ISO 17621:2015 Workplace atmospheres — Short term detector tube measurement systems — Requirements and test methods D
TC 147 Water quality
ISO 18191:2015 * Water quality — Determination of pHt in sea water — Method using the indicator dye m-cresol purple B
ISO 17244:2015 Water quality — Determination of the toxicity of water samples on the embryo-larval development of Japanese oyster (Crassostrea gigas) and mussel (Mytilus edulis or Mytilus galloprovincialis) D
TC 149 Cycles
ISO 4210-1:2014 Cycles — Safety requirements for bicycles — Part 1: Terms and definitions A
ISO 4210-2:2014 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles E
ISO 4210-3:2014 Cycles — Safety requirements for bicycles — Part 3: Common test methods B
ISO 4210-4:2014 Cycles — Safety requirements for bicycles — Part 4: Braking test methods E
ISO 4210-5:2014 Cycles — Safety requirements for bicycles — Part 5: Steering test methods C
ISO 4210-6:2014 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods D
ISO 4210-7:2014 Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods B
ISO 4210-8:2014 Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods B
ISO 4210-9:2014 Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods A
TC 150 Implants for surgery
ISO 13356:2015 Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) C
ISO 5840-1:2015 Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements G
ISO 5840-2:2015 Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes G
ISO 12417-1:2015 Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements F
TC 156 Corrosion of metals and alloys
ISO 16540:2015 Corrosion of metals and alloys  — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method C
TC 159 Ergonomics
ISO 7250-3:2015 Basic human body measurements for technological design — Part 3: Worldwide and regional design ranges for use in product standards E
TC 164 Mechanical testing of metals
ISO 6892-4:2015 * Metallic materials — Tensile testing — Part 4: Method of test in liquid helium C
ISO 18338:2015 * Metallic materials — Torsion test at ambient temperature C
ISO 16859-1:2015 Metallic materials — Leeb hardness test — Part 1: Test method D
ISO 16859-2:2015 Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices B
ISO 16859-3:2015 Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks C
ISO 14556:2015 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method D
TC 172 Optics and photonics
ISO 12853:2015 * Microscopes — Information provided to the user A
ISO 19055:2015 * Microscopes — Minimum requirements for binocular tubes A
ISO 19056-1:2015 * Microscopes — Definition and measurement of illumination properties — Part 1: Image brightness and uniformity in bright field microscopy A
TC 173 Assistive products for persons with disability
ISO 10865-2:2015 * Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 2: Systems for forward-facing wheelchair-seated passengers E
ISO 16840-6:2015 Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions E
ISO/TR 16840-9:2015 Wheelchair seating — Part 9: Clinical interface pressure mapping guidelines for seating C
TC 176 Quality management and quality assurance
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary G
ISO 9001:2015 Quality management systems — Requirements E
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 9599:2015 * Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method A
ISO 15247:2015 * Zinc sulfide concentrates — Determination of silver content — Acid dissolution and flame atomic absorption spectrometric method C
TC 188 Small craft
ISO 19009:2015 Small craft — Electric navigation lights — Performance of LED lights C
TC 189 Ceramic tile
ISO 10545-14:2015 Ceramic tiles — Part 14: Determination of resistance to stains B
TC 199 Safety of machinery
ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design B
TC 204 Intelligent transport systems
ISO 14813-1:2015 * Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services H
ISO/TS 14907-1:2015 * Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of test procedures H
ISO 17515-1:2015 * Intelligent transport systems — Communications access for land mobiles (CALM) — Evolved Universal Terrestrial Radio Access Network (E-UTRAN) — Part 1: General usage B
ISO/TS 19299:2015 Electronic fee collection — Security framework H
TC 206 Fine ceramics
ISO 17859:2015 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field B
TC 207 Environmental management
ISO 14001:2015 Environmental management systems — Requirements with guidance for use E
TC 211 Geographic information/Geomatics
ISO 19135-1:2015 Geographic information — Procedures for item registration — Part 1: Fundamentals G
TC 213 Dimensional and geometrical product specifications and verification
ISO 286-2:2010/Cor 1:2013 * Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — Technical Corrigendum 1 free
ISO 16610-40:2015 Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts C
TC 215 Health informatics
ISO/TS 13972:2015 * Health informatics — Detailed clinical models, characteristics and processes G
ISO 14199:2015 * Health informatics — Information models — Biomedical Research Integrated Domain Group (BRIDG) Model B
ISO/TS 17975:2015 * Health informatics — Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information E
ISO 21549-5:2015 * Health informatics — Patient healthcard data — Part 5: Identification data B
TC 219 Floor coverings
ISO 12951:2015 Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine B
ISO 16905:2015 * Resilient floor coverings — Specification for rubber floor covering — Tile/Plank B
TC 220 Cryogenic vessels
ISO 21029-2:2015 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements C
TC 228 Tourism and related services
ISO 13810:2015 Tourism services — Industrial tourism — Service provision C
TC 229 Nanotechnologies
ISO/TS 80004-2:2015 Nanotechnologies — Vocabulary — Part 2: Nano-objects B
TC 234 Fisheries and aquaculture
ISO 16741:2015 Traceability of crustacean products — Specifications on the information to be recorded in farmed crustacean distribution chains E
ISO 18539:2015 Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains D
TC 238 Solid biofuels
ISO 18134-2:2015 * Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method A
ISO 18134-3:2015 Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample A
TC 263 Coalbed methane (CBM)
ISO 18871:2015 * Method of determining coalbed methane content E
TC 292 Security and resilience
ISO 18788:2015 * Management system for private security operations — Requirements with guidance for use H
ISO/TS 22317:2015 * Societal security — Business continuity management systems — Guidelines for business impact analysis (BIA) E
ISO/TS 22318:2015 * Societal security — Business continuity management systems — Guidelines for supply chain continuity D
ISO/TR 22351:2015 * Societal security — Emergency management — Message structure for exchange of information H
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 5402-2:2015 * Leather — Determination of flex resistance — Part 2: Vamp flex method A
ISO 18219:2015 Leather — Determination of chlorinated hydrocarbons in leather — Chromatographic method for short-chain chlorinated paraffins (SCCP) A
JTC 1 Information technology
ISO/IEC TR 19759:2015 * Software Engineering — Guide to the software engineering body of knowledge (SWEBOK) H
ISO/IEC 19987:2015 * Information technology — EPC Information services — Specification H
ISO/IEC 19988:2015 * Information technology — GS1 Core Business Vocabulary (CBV) G
ISO/IEC 20243:2015 * Information Technology — Open Trusted Technology ProviderTM Standard (O-TTPS) — Mitigating maliciously tainted and counterfeit products E
ISO/IEC 9594-6:2014/Cor 1:2015 * Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types — Technical Corrigendum 1 free
ISO/IEC 9594-8:2014/Cor 1:2015 * Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 1 free
ISO/IEC 19770-2:2015 * Information technology — Software asset management — Part 2: Software identification tag G
ISO/IEC TS 30103:2015 * Software and Systems Engineering — Lifecycle Processes — Framework for Product Quality Achievement F
ISO/IEC 17960:2015 * Information technology — Programming languages, their environments and system software interfaces — Code signing for source code B
ISO/IEC TS 19568:2015 * Programming Languages — C++ Extensions for Library Fundamentals H
ISO/IEC TS 19841:2015 * Technical Specification for C++ Extensions for Transactional Memory E
ISO/IEC 19775-2:2015 * Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) — Part 2: Scene access interface (SAI) A
ISO/IEC 14543-4-3:2015 * Information technology — Home Electronic Systems (HES) architecture — Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1 E
ISO/IEC 14763-2:2012/Amd 1:2015 * Information technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation — Amendment 1 XZ
ISO/IEC 14776-326:2015 * Information technology — Small Computer System Interface (SCSI) — Part 326: Reduced Block Commands (RBC) F
ISO/IEC 14888-2:2008/Cor 1:2015 * Information technology — Security techniques — Digital signatures with appendix — Part 2: Integer factorization based mechanisms — Technical Corrigendum 1: To ISO/IEC 14888-2:2008 free
ISO/IEC 19790:2012/Cor 1:2015 * Information technology — Security techniques — Security requirements for cryptographic modules — Technical Corrigendum 1 free
ISO/IEC 24759:2014/Cor 1:2015 * Information technology — Security techniques — Test requirements for cryptographic modules
— Technical Corrigendum 1
free
ISO/IEC 27006:2015 * Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems E
ISO/IEC 17823:2015 * Information technology — Office equipment — Colour terminology for office colour equipment C
ISO/IEC 23000-13:2014/Amd 1:2015 * Information technology – Multimedia application format (MPEG-A) — Part 13: Augmented reality application format — Amendment 1: ARAF reference software and conformance XZ
ISO/IEC 23001-10:2015 * Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format C
ISO/IEC 23008-2:2015/Amd 1:2015 * Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 1: 3D video extensions H
ISO/IEC 15438:2015 * Information technology — Automatic identification and data capture techniques — PDF417 bar code symbology specification H
ISO/IEC 24769-61:2015 * Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface A
ISO/IEC 24769-62:2015 * Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface A
ISO/IEC 24770-61:2015 * Information technology — Real Time Locating System (RTLS) device performance test methods — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface B
ISO/IEC 9075-2:2011/Cor 2:2015 * Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) — Technical Corrigendum 2 free
ISO/IEC 9075-4:2011/Cor 2:2015 * Information technology — Database languages — SQL — Part 4: Persistent Stored Modules (SQL/PSM) — Technical Corrigendum 2 free
ISO/IEC 9075-14:2011/Cor 2:2015 * Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) — Technical Corrigendum 2 free
ISO/IEC 15944-2:2015 * Information technology — Business Operational View — Part 2: Registration of scenarios and their components as business objects H
ISO/IEC 15944-9:2015 * Information technology — Business Operational View — Part 9: Business transaction traceability framework for commitment exchange H
ISO/IEC 19785-3:2015 * Information technology — Common Biometric Exchange Formats Framework — Part 3: Patron format specifications G
ISO/IEC 19794-6:2011/Amd 1:2015 * Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 1: Conformance testing methodology and clarification of defects F
ISO/IEC TS 20027:2015 * Biometrics interoperability profiles — Best practices for slap tenprint captures C

 

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków