Nowa norma ISO

ISO.org – normy opublikowane w maju 2017 roku

Nowe normy i standardy opublikowane w maju 2017 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

Grupa cenowa
PC 280 Management consultancy
ISO 20700:2017 * Guidelines for management consultancy services E
TC 6 Paper, board and pulps
ISO 9416:2017 * Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) B
ISO 11475:2017 * Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) C
ISO 11480:2017 * Pulp, paper and board — Determination of total chlorine and organically bound chlorine C
TC 8 Ships and marine technology
ISO 6482:2017 * Shipbuilding — Deck machinery — Warping end profiles A
TC 17 Steel
ISO 14404-3:2017 * Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility D
ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire — Part 1: General requirements E
ISO 16120-4:2017 Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod for special applications B
TC 20 Aircraft and space vehicles
ISO 18170:2017 * Aerospace series — AC induction electric motor driven, variable delivery, hydraulic pumps — General requirements G
TC 21 Equipment for fire protection and fire fighting
ISO 21927-7:2017 * Smoke and heat control systems — Part 7: Smoke ducts sections B
ISO 21927-8:2017 * Smoke and heat control systems — Part 8: Smoke control dampers C
TC 22 Road vehicles
ISO/PAS 19451-1:2016 * Application of ISO 26262:2011-2012 to semiconductors — Part 1: Application of concepts H
ISO 17949:2013/Amd 1:2017 * Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices — Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions — Amendment 1 XZ
TC 23 Tractors and machinery for agriculture and forestry
ISO 4254-12:2012/Amd 1:2017 Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers — Amendment 1 XZ
ISO 5395-2:2013/Amd 2:2017 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 2: Cutting-means-enclosure guards XZ
ISO 7112:2017 Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary A
TC 24 Particle characterization including sieving
ISO/TS 14411-1:2017 * Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles E
TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 13357-1:2017 * Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water B
ISO 13357-2:2017 * Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils B
ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions C
ISO 19970:2017 * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations B
TC 29 Small tools
ISO/TS 13399-2:2014 Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items H
ISO/TS 13399-3:2014 Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items H
ISO/TS 13399-4:2014 Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items G
ISO/TS 13399-5:2014 Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items G
ISO/TS 13399-50:2013 Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts H
ISO/TS 13399-80:2017 * Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles E
TC 31 Tyres, rims and valves
ISO 16392:2017 Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig B
ISO 4251-1:2017 Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours D
ISO 4251-2:2017 Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings C
TC 34 Food products
ISO/TS 19046-1:2017 Cheese — Determination of propionic acid level by chromatography — Part 1: Method by gas chromatography B
ISO/TS 19046-2:2017 Cheese — Determination of propionic acid level by chromatography — Part 2: Method by ion exchange chromatography B
ISO 11290-1:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. — Part 1: Detection method F
ISO 11290-2:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. — Part 2: Enumeration method E
TC 35 Paints and varnishes
ISO 3668:2017 * Paints and varnishes — Visual comparison of colour of paints B
TC 42 Photography
ISO 15739:2017 * Photography — Electronic still-picture imaging — Noise measurements E
ISO 18844:2017 * Photography — Digital cameras — Image flare measurement B
TC 43 Acoustics
ISO/TS 11819-3:2017 Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres C
ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method C
TC 44 Welding and allied processes
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification C
ISO 14555:2017 Welding — Arc stud welding of metallic materials G
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys F
TC 45 Rubber and rubber products
ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification C
ISO 36:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics B
ISO 19846:2017 Reclaimed rubber — Coding and classification system A
TC 46 Information and documentation
ISO 5127:2017 * Information and documentation — Foundation and vocabulary A
ISO 15836-1:2017 Information and documentation — The Dublin Core metadata element set — Part 1: Core elements B
TC 58 Gas cylinders
ISO/TR 19811:2017 * Gas cylinders — Service life testing for cylinders and tubes of composite construction B
TC 59 Buildings and civil engineering works
ISO 10563:2017 Buildings and civil engineering works — Sealants — Determination of change in mass and volume A
ISO 16745-1:2017 * Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication F
ISO 16745-2:2017 * Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 2: Verification A
TC 61 Plastics
ISO 5659-2:2017 Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test F
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens E
ISO 20568-1:2017 Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications C
ISO 20568-2:2017 Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties D
TC 69 Applications of statistical methods
ISO 11843-5:2008/Amd 1:2017 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases — Amendment 1 XZ
TC 70 Internal combustion engines
ISO 4548-12:2017 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity E
ISO 8178-1:2017 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions H
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/TS 16774-1:2017 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 1: Test method for thermal stability C
ISO/TS 16774-5:2017 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 5: Test method for watertightness C
ISO/TS 16774-6:2017 * Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 6: Test method for response to the substrate movement C
TC 82 Mining
ISO 19225:2017 Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems D
TC 84 Devices for administration of medicinal products and catheters
ISO 7886-1:2017 Sterile hypodermic syringes for single use — Part 1: Syringes for manual use E
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM 51205:2017 * Practice for use of a ceric-cerous sulfate dosimetry system B
ISO 12183:2016 Nuclear fuel technology — Controlled-potential coulometric assay of plutonium E
ISO 21484:2017 Nuclear Energy — Fuel technology — Determination of the O/M ratio in MOX pellets by the gravimetric method A
TC 92 Fire safety
ISO 3008-2:2017 Fire-resistance tests — Part 2: Lift landing door assemblies D
TC 96 Cranes
ISO 8566-5:2017 Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes A
ISO 8686-5:2017 Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes E
TC 102 Iron ore and direct reduced iron
ISO/TR 9686:2017 * Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement C
ISO 13930:2015 * Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method B
TC 106 Dentistry
ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments B
ISO 7787-3:2017 Dentistry — Laboratory cutters — Part 3: Carbide cutters for milling machines A
ISO 19490:2017 * Dentistry — Sinus membrane elevator A
ISO 19715:2017 Dentistry — Filling instrument with contra angle B
ISO 11609:2017 Dentistry — Dentifrices — Requirements, test methods and marking D
TC 107 Metallic and other inorganic coatings
ISO 20267:2017 * Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 8041-1:2017 Human response to vibration — Measuring instrumentation — Part 1: General purpose vibration meters H
ISO 16063-45:2017 * Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil C
ISO/TR 19664:2017 * Human response to vibration — Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety B
ISO 21940-2:2017 * Mechanical vibration — Rotor balancing — Part 2: Vocabulary A
TC 113 Hydrometry
ISO 1438:2017 * Hydrometry — Open channel flow measurement using thin-plate weirs G
ISO 6420:2016 Hydrometry — Position fixing equipment for hydrometric boats B
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-74:2017 Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment H
TC 126 Tobacco and tobacco products
ISO 13276:2017 Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid A
TC 133 Clothing sizing systems – size designation, size measurement methods and digital fittings
ISO 5971:2017 * Size designation of clothes — Tights B
TC 145 Graphical symbols
ISO 7001:2007/Amd 4:2017 * Graphical symbols — Public information symbols — Amendment 4 XZ
ISO 3864-2:2016 Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels D
TC 147 Water quality
ISO 9308-1:2014/Amd 1:2016 Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method for waters with low bacterial background flora — Amendment 1 XZ
ISO 11731:2017 Water quality — Enumeration of Legionella F
ISO 5667-14:2014 Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling E
TC 150 Implants for surgery
ISO 19233-1:2017 * Implants for surgery — Orthopaedic joint prosthesis — Part 1: Procedure for producing parametric 3D bone models from CT data of the knee B
TC 153 Valves
ISO 19240:2017 * Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries B
TC 155 Nickel and nickel alloys
ISO 6372:2017 * Nickel and nickel alloys — Terms and definitions A
TC 156 Corrosion of metals and alloys
ISO 3651-3:2017 * Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels B
ISO 15257:2017 Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme E
TC 158 Analysis of gases
ISO 16664:2017 * Gas analysis — Handling of calibration gases and gas mixtures — Guidelines C
TC 171 Document management applications
ISO/TR 15801:2017 * Document management — Electronically stored information — Recommendations for trustworthiness and reliability F
TC 172 Optics and photonics
ISO 10939:2017 Ophthalmic instruments — Slit-lamp microscopes A
ISO 15798:2013/Amd 1:2017 Ophthalmic implants — Ophthalmic viscosurgical devices — Amendment 1 XZ
ISO/TR 18476:2017 * Ophthalmic optics and instruments — Free form technology — Spectacle lenses and measurement E
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-16:2017 Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables C
TC 204 Intelligent transport systems
ISO 14823:2017 * Intelligent transport systems — Graphic data dictionary F
ISO/TS 20026:2017 * Intelligent transport systems — Cooperative ITS — Test architecture D
TC 205 Building environment design
ISO 16817:2017 * Building environment design — Indoor environment — Design process for the visual environment E
TC 213 Dimensional and geometrical product specifications and verification
ISO 25178-72:2017 Geometrical product specifications (GPS) — Surface texture: Areal — Part 72: XML file format x3p D
TC 215 Health informatics
ISO/IEEE 11073-00103:2015 Health informatics — Personal health device communication — Part 00103: Overview G
ISO/IEEE 11073-10442:2015 Health informatics — Personal health device communication — Part 10442: Device specialization — Strength fitness equipment F
ISO/TS 20428:2017 * Health informatics — Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records E
TC 217 Cosmetics
ISO 18415:2017 Cosmetics — Microbiology — Detection of specified and non-specified microorganisms D
ISO 21148:2017 Cosmetics — Microbiology — General instructions for microbiological examination D
ISO 21149:2017 Cosmetics — Microbiology  — Enumeration and detection of aerobic mesophilic bacteria D
TC 219 Floor coverings
ISO 10833:2017 * Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test A
TC 225 Market, opinion and social research
ISO 19731:2017 * Digital analytics and web analyses for purposes of market, opinion and social research — Vocabulary and service requirements C
TC 229 Nanotechnologies
ISO/TS 10868:2017 * Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy D
ISO/TR 18401:2017 * Nanotechnologies — Plain language explanation of selected terms from the ISO/IEC 80004 series C
ISO/TS 18827:2017 * Nanotechnologies — Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials D
TC 249 Traditional chinese medicine
ISO 19611:2017 * Traditional Chinese medicine — Air extraction cupping device B
ISO 19614:2017 * Traditional Chinese medicine — Pulse graph force transducer D
ISO 20308:2017 * Traditional Chinese medicine — Gua Sha instruments C
ISO 20409:2017 * Traditional Chinese medicine — Panax notoginseng root and rhizome C
ISO 20498-2:2017 * Traditional Chinese medicine — Computerized tongue image analysis system — Part 2: Light environment A
TC 258 Project, programme and portfolio management
ISO 21505:2017 * Project, programme and portfolio management — Guidance on governance D
TC 260 Human resource management
ISO/TR 30406:2017 * Human resource management — Sustainable employability management for organizations C
TC 264 Fireworks
ISO 25947-1:2017 Fireworks — Categories 1, 2 and 3 — Part 1: Terminology A
ISO 25947-2:2017 Fireworks — Categories 1, 2 and 3 — Part 2: Categories and types B
ISO 25947-3:2017 Fireworks — Categories 1, 2 and 3 — Part 3: Minimum labelling requirements E
ISO 25947-4:2017 Fireworks — Categories 1, 2 and 3 — Part 4: Test methods E
ISO 25947-5:2017 Fireworks — Categories 1, 2 and 3 — Part 5: Requirements for construction and performance D
TC 269 Railway applications
ISO/TS 22163:2017 Railway applications — Quality management system — Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector G
TC 292 Security and resilience
ISO 22319:2017 Security and resilience — Community resilience — Guidelines for planning the involvement of spontaneous volunteers C
JTC 1 Information technology
ISO/IEC 30182:2017 * Smart city concept model — Guidance for establishing a model for data interoperability G
ISO/IEC 9594-1:2017 * Information technology — Open Systems Interconnection — The Directory — Part 1: Overview of concepts, models and services D
ISO/IEC 9594-2:2017 * Information technology — Open Systems Interconnection — The Directory — Part 2: Models H
ISO/IEC 9594-3:2017 * Information technology — Open Systems Interconnection — The Directory — Part 3: Abstract service definition H
ISO/IEC 9594-4:2017 * Information technology — Open Systems Interconnection — The Directory — Part 4: Procedures for distributed operation H
ISO/IEC 9594-5:2017 * Information technology — Open Systems Interconnection — The Directory — Part 5: Protocol specifications H
ISO/IEC 9594-6:2017 * Information technology — Open Systems Interconnection — The Directory — Part 6: Selected attribute types H
ISO/IEC 9594-7:2017 * Information technology — Open Systems Interconnection — The Directory — Part 7: Selected object classes E
ISO/IEC 9594-8:2017 * Information technology — Open Systems Interconnection — The Directory — Part 8: Public-key and attribute certificate frameworks H
ISO/IEC 9594-9:2017 * Information technology — Open Systems Interconnection — The Directory — Part 9: Replication F
ISO/IEC/IEEE 15939:2017 * Systems and software engineering — Measurement process F
ISO/IEC 20741:2017 * Systems and software engineering — Guideline for the evaluation and selection of software engineering tools E
ISO/IEC 15693-3:2009/Amd 4:2017 * Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 4: Security framework D
ISO/IEC TR 11801-9904:2017 * Information technology — Generic cabling systems for customer premises — Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications D
ISO/IEC 27037:2012 Information technology — Security techniques — Guidelines for identification, collection, acquisition and preservation of digital evidence F
ISO/IEC 27038:2014 Information technology — Security techniques — Specification for digital redaction B
ISO/IEC 27040:2015 Information technology — Security techniques — Storage security H
ISO/IEC 27041:2015 Information technology — Security techniques — Guidance on assuring suitability and adequacy of incident investigative method C
ISO/IEC 27042:2015 Information technology — Security techniques — Guidelines for the analysis and interpretation of digital evidence C
ISO/IEC 27043:2015 Information technology — Security techniques — Incident investigation principles and processes E
ISO/IEC 13818-1:2015/Amd 3:2016/Cor 1:2017 * Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 3: Carriage of green metadata in MPEG2 systems — Technical Corrigendum 1 free
ISO/IEC 13818-1:2015/Cor 2:2017 * Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Technical Corrigendum 2 free
ISO/IEC 21000-21:2017 * Information technology — Multimedia framework (MPEG-21) — Part 21: Media contract ontology H
ISO/IEC 19794-15:2017 * Information technology — Biometric data interchange format — Part 15: Palm crease image data D

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości


Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków



Dbamy o jakość!

Masz uwagi lub sugestie. Wypełnij krótką ANKIETĘ na temat naszej strony.

Szukaj we wszystkich serwisach IKMJ