Zobacz nowe normy (lipiec 2014)! | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – norm opublikowane w lipcu 2014 | ISO.org – norm opublikowane w lipcu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – norm opublikowane w lipcu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – norm opublikowane w lipcu 2014

Nowe normy międzynarodowe opublikowane od 01 do 31 lipca 2014

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

PC 251 Asset management
ISO 55000:2014 Asset management — Overview, principles and terminology
ISO 55001:2014 Asset management — Management systems — Requirements
ISO 55002:2014 Asset management — Management systems — Guidelines for the application of ISO 55001
REMCO Committee on reference materials
ISO Guide 80:2014 Guidance for the in-house preparation of quality control materials (QCMs)
TC 2 Fasteners
ISO 4017:2014 Fasteners — Hexagon head screws — Product grades A and B
TC 4 Rolling bearings
ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
ISO 492:2014 Rolling bearings — Radial bearings — Dimensional and geometrical tolerances
TC 6 Paper, board and pulps
ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO 5631-2:2014 Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)
ISO 5631-3:2014 Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)
TC 8 Ships and marine technology
ISO 8728:2014 Ships and marine technology — Marine gyro-compasses
ISO 9875:2000 Ships and marine technology — Marine echo-sounding equipment
ISO 14885:2014 Large yachts — Diesel engines for main propulsion and essential auxiliaries — Safety requirements
TC 17 Steel
ISO 13933:2014 Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emission spectrometric method
ISO 683-4:2014 Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels
ISO 4999:2014 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
TC 20 Aircraft and space vehicles
ISO 6966-2:2014 Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
TC 22 Road vehicles
ISO 16552:2014 Heavy commercial vehicles and buses — Stopping distance in straight-line braking with ABS — Open loop and closed loop test methods
ISO 12614-1:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions
ISO 12614-2:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods
ISO 12614-3:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve
ISO 12614-4:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve
ISO 12614-5:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge
ISO 12614-6:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 6: Pressure regulator
ISO 12614-7:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Pressure relief valve
ISO 12614-8:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Excess flow valve
ISO 12614-9:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Gas-tight housing and ventilation hose
ISO 12614-10:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel
ISO 12614-11:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Fittings
ISO 12614-12:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in copper and its alloys
ISO 12614-13:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Tank pressure control regulator
ISO 12614-14:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 14: Differential pressure fuel content gauge
ISO 12614-15:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Capacitance fuel content gauge
ISO 12614-16:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Heat exchanger – vaporizer
ISO 12614-17:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector
ISO 12614-18:2014 Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Gas temperature sensor
TC 23 Tractors and machinery for agriculture and forestry
ISO 730:2009/Amd 1:2014 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 — Amendment 1
ISO 11783-6:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal
TC 29 Small tools
ISO/TS 13399-80:2014 Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
ISO 603-17:2014 Bonded abrasive products — Dimensions — Part 17: Spindle mounted wheels (ISO type 52)
ISO 242:2014 Carbide tips for brazing on turning tools
ISO 243:2014 Turning tools with carbide tips — External tools
ISO 514:2014 Turning tools with carbide tips — Internal tools
ISO 9361-1:2014 Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
TC 34 Food products
ISO/TR 6579-3:2014 Microbiology of the food chain — Horizontal method for the detection, enumeration and serotyping of Salmonella — Part 3: Guidelines for serotyping of Salmonella spp.
ISO 5555:2001/Amd 1:2014 Animal and vegetable fats and oils — Sampling — Amendment 1: Flexitanks
ISO 12228-1:2014 Determination of individual and total sterols contents — Gas chromatographic method — Part 1: Animal and vegetable fats and oils
TC 35 Paints and varnishes
ISO 17463:2014 Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
TC 37 Terminology and other language and content resources
ISO 24617-4:2014 Language resource management — Semantic annotation framework (SemAF) — Part 4: Semantic roles (SemAF-SR)
TC 38 Textiles
ISO 16533:2014 Textiles — Measurement of exothermic and endothermic properties of textiles under humidity change
ISO 3074:2014 Wool — Determination of dichloromethane-soluble matter in combed sliver
ISO 18068:2014 Cotton fibres — Test method for sugar content — Spectrophotometry
TC 43 Acoustics
ISO 10844:2014 Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres
ISO/TR 17534-2:2014 Acoustics — Software for the calculation of sound outdoors — Part 2: General recommendations for test cases and quality assurance interface
ISO 16251-1:2014 Acoustics — Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor
TC 44 Welding and allied processes
ISO 13469:2014 Mechanical joining — Form-fit blind rivets and (lock) bolt joints — Specifications and qualification of testing procedures
TC 45 Rubber and rubber products
ISO 8030:2014 Rubber and plastics hoses — Method of test for flammability
ISO 249:2014 Rubber, raw natural — Determination of dirt content
ISO 6101-3:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
ISO 6101-4:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
ISO 18766:2014 Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide
ISO 3302-1:2014 Rubber — Tolerances for products — Part 1: Dimensional tolerances
ISO 3385:2014 Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
ISO/TS 22762-4:2014 Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
TC 46 Information and documentation
ISO 18626:2014 Information and documentation — Interlibrary Loan Transactions
TC 54 Essential oils
ISO 3218:2014 Essential oils — Principles of nomenclature
TC 58 Gas cylinders
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
ISO 9809-4:2014 Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
TC 60 Gears
ISO 14104:2014 Gears — Surface temper etch inspection after grinding, chemical method
TC 61 Plastics
ISO 3167:2014 Plastics — Multipurpose test specimens
ISO 11358-1:2014 Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
ISO 844:2014 Rigid cellular plastics — Determination of compression properties
ISO 4895:2014 Plastics — Liquid epoxy resins — Determination of tendency to crystallize
TC 68 Financial services
ISO 9564-2:2014 Financial services — Personal Identification Number (PIN) management and security — Part 2: Approved algorithms for PIN encipherment
TC 69 Applications of statistical methods
ISO 11843-6:2013 Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
ISO 16336:2014 Applications of statistical and related methods to new technology and product development process — Robust parameter design (RPD)
TC 70 Internal combustion engines
ISO 4548-15:2014 Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings
TC 72 Textile machinery and accessories
ISO 12912:2014 Circular knitting machines — Vocabulary
TC 87 Cork
ISO 9986:2014 Composition cork for shoe outsoles
TC 106 Dentistry
ISO 16443:2014 Dentistry — Vocabulary for dental implants systems and related procedure
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10816-8:2014 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems
ISO 16063-42:2014 Methods for the calibration of vibration and shock transducers — Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
ISO 17359:2011 Condition monitoring and diagnostics of machines — General guidelines
ISO 18436-6:2014 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 6: Acoustic emission
TC 110 Industrial trucks
ISO 22915-16:2014 Industrial trucks — Verification of stability — Part 16: Pedestrian-propelled trucks
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-69:2014 Medical electrical equipment — Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
TC 130 Graphic technology
ISO 12647-4:2014 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 4: Publication gravure printing
TC 131 Fluid power systems
ISO 7241:2014 Hydraulic fluid power — Dimensions and requirements of quick-action couplings
TC 135 Non-destructive testing
ISO 17405:2014 Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
TC 146 Air quality
ISO 14385-1:2014 Stationary source emissions — Greenhouse gases — Part 1: Calibration of automated measuring systems
ISO 14385-2:2014 Stationary source emissions — Greenhouse gases — Part 2: Ongoing quality control of automated measuring systems
ISO 16000-32:2014 Indoor air — Part 32: Investigation of buildings for the occurrence of pollutants
TC 147 Water quality
ISO 5667-6:2014 Water quality — Sampling — Part 6: Guidance on sampling of rivers and streams
TC 150 Implants for surgery
ISO 5841-2:2014 Implants for surgery — Cardiac pacemakers — Part 2: Reporting of clinical performance of populations of pulse generators or leads
TC 158 Analysis of gases
ISO 6145-2:2014 Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 2: Piston pumps
TC 163 Thermal performance and energy use in the built environment
ISO 9869-1:2014 Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 1: Heat flow meter method
TC 164 Mechanical testing of metals
ISO 16808:2014 Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
TC 172 Optics and photonics
ISO 12858-1:2014 Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling staffs
ISO 11979-10:2006/Amd 1:2014 Ophthalmic implants — Intraocular lenses — Part 10: Phakic intraocular lenses — Amendment 1
TC 176 Quality management and quality assurance
ISO 10002:2014 Quality management — Customer satisfaction — Guidelines for complaints handling in organizations
TC 188 Small craft
ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
ISO 12215-5:2008/Amd 1:2014 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination — Amendment 1
TC 189 Ceramic tile
ISO 10545-4:2014 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
ISO 13007-1:2014 Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
TC 190 Soil quality
ISO 14388-1:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 1: Introduction and definitions, symbols and acronyms, sampling and sample preparation
ISO 14388-2:2014 Soil quality – Acid-base accounting procedure for acid sulfate soils — Part 2: Chromium reducible sulfur (CRS) methodology
ISO 14388-3:2014 Soil quality — Acid-base accounting procedure for acid sulfate soils — Part 3: Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) methodology
TC 193 Natural gas
ISO 6974-5:2014 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons
TC 198 Sterilization of health care products
ISO 11135:2014 Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 11607-1:2006/Amd 1:2014 Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — Amendment 1
ISO 11607-2:2006/Amd 1:2014 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
TC 201 Surface chemical analysis
ISO 14706:2014 Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
TC 204 Intelligent transport systems
ISO 15638-6:2014 Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 6: Regulated applications
ISO 15638-8:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 8: Vehicle access management
ISO 15638-11:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 11: Driver work records
ISO 15638-12:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 12: Vehicle mass monitoring
ISO 15638-14:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 14: Vehicle access control
ISO 15638-15:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 15: Vehicle location monitoring
ISO 15638-16:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 16: Vehicle speed monitoring
ISO 15638-17:2014 Intelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TARV) — Part 17: Consignment and location monitoring
ISO/TS 17427:2014 Intelligent transport systems — Cooperative systems — Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
TC 206 Fine ceramics
ISO 17942:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders
TC 207 Environmental management
ISO 14046:2014 Environmental management — Water footprint — Principles, requirements and guidelines
ISO/TS 14071:2014 Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006
TC 211 Geographic information/Geomatics
ISO/TS 19159-1:2014 Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 1: Optical sensors
TC 215 Health informatics
ISO/TS 17948:2014 Health informatics — Traditional Chinese medicine literature metadata
TC 223 Societal security
ISO 22397:2014 Societal security — Guidelines for establishing partnering arrangements
TC 226 Materials for the production of primary aluminium
ISO 10143:2014 Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by the three-point method
ISO 12986-2:2014 Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method
ISO 18515:2014 Carbonaceous materials for the production of aluminium — Cathode blocks and baked anodes — Determination of compressive strength
TC 238 Solid biofuels
ISO 16559:2014 Solid biofuels — Terminology, definitions and descriptions
TC 247 Fraud countermeasures and controls
ISO 16678:2014 Guidelines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 2588:2014 Leather — Sampling — Number of items for a gross sample
JTC 1 Information technology
ISO/IEC 29182-6:2014 Information technology — Sensor networks: Sensor Network Reference Architecture (SNRA) — Part 6: Applications
ISO/IEC 15149-1:2014 Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 1: Air interface
ISO/IEC 17839-1:2014 Information technology — Biometric System-on-Card — Part 1: Core requirements
ISO/IEC TS 18661-1:2014 Information technology — Programming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 1: Binary floating-point arithmetic
ISO/IEC 14763-3:2014 Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling
ISO/IEC 10118-4:1998/Cor 1:2014 Information technology — Security techniques — Hash-functions — Part 4: Hash-functions using modular arithmetic — Technical Corrigendum 1
ISO/IEC 27018:2014 Information technology — Security techniques — Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors
ISO/IEC 27036-2:2014 Information technology — Security techniques — Information security for supplier relationships — Part 2: Requirements
ISO/IEC 14496-4:2004/Amd 41:2014 Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 41: Conformance testing of MVC plus depth extension of AVC
ISO/IEC 14496-12:2012/Cor 2:2014 Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 2
ISO/IEC 14496-28:2012/Cor 2:2014 Information technology — Coding of audio-visual objects — Part 28: Composite font representation — Technical Corrigendum 2: Changes and clarifications of CFR element descriptions
ISO/IEC 15444-12:2012/Cor 2:2014 Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 2
ISO/IEC 23001-4:2014 Information technology — MPEG systems technologies — Part 4: Codec configuration representation
ISO/IEC 29199-4:2010/Amd 1:2014 Information technology — JPEG XR image coding system — Part 4: Conformance testing — Amendment 1: Additional JPEG XR conformance test streams
ISO/IEC 29167-11:2014 Information technology — Automatic identification and data capture techniques — Part 11: Crypto suite PRESENT-80 security services for air interface communications
ISO/IEC TR 13066-6:2014 Information technology — Interoperability with Assistive Technology (AT) — Part 6: Java accessibility application programming interface (API)
ISO/IEC TR 30112:2014 Information technology — Specification methods for cultural conventions
ISO/IEC 20006-1:2014 Information technology for learning, education and training — Information model for competency — Part 1: Competency general framework and information model
ISO/IEC 19794-11:2013/Amd 1:2014 Information technology — Biometric data interchange formats — Part 11: Signature/sign processed dynamic data — Amendment 1: Conformance test assertions
ISO/IEC TR 29144:2014 Information technology — Biometrics — The use of biometric technology in commercial Identity Management applications and processes

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków