Zobacz nowe normy (sierpień 2014)! | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – norm opublikowane w sierpniu 2014 | ISO.org – norm opublikowane w sierpniu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – norm opublikowane w sierpniu 2014 – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – norm opublikowane w sierpniu 2014

Nowe normy międzynarodowe opublikowane od 01 do 31 sierpnia 2014

Za www.iso.org

 

Jeżeli chcesz przetłumaczyć na język polski, skopiuj i wklej do Tłumacza Google.

Uważaj, Google czasami śmiesznie tłumaczy tytuł :).

Miłej lektury i zabawy!

IIW International Institute of Welding
ISO/TR 13392:2014 Health and safety in welding and allied processes — Arc welding fume components
PC 245 Cross-border trade of second-hand goods
ISO/TS 20245:2014 Cross-border trade of second-hand goods
TC 4 Rolling bearings
ISO 3290-1:2014 Rolling bearings — Balls — Part 1: Steel balls
ISO 3290-2:2014 Rolling bearings — Balls — Part 2: Ceramic balls
TC 6 Paper, board and pulps
ISO 2758:2014 Paper — Determination of bursting strength
ISO 5630-7:2014 Paper and board — Accelerated ageing — Part 7: Exposure to light
TC 20 Aircraft and space vehicles
ISO 21100:2014 Air cargo unit load devices — Performance requirements and test parameters
TC 21 Equipment for fire protection and fire fighting
ISO 7240-28:2014 Fire detection and alarm systems — Part 28: Fire protection control equipment
TC 22 Road vehicles
ISO/TS 18571:2014 Road vehicles — Objective rating metric for non-ambiguous signals
ISO/TS 15007-2:2014 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
TC 29 Small tools
ISO 26623-1:2014 Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
ISO 26623-2:2014 Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
ISO 5610-1:2014 Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
ISO 5610-2:2014 Tool holders with rectangular shank for indexable inserts — Part 2: Style A
ISO 5610-3:2014 Tool holders with rectangular shank for indexable inserts — Part 3: Style B
ISO 5610-4:2014 Tool holders with rectangular shank for indexable inserts — Part 4: Style D
ISO 5610-5:2014 Tool holders with rectangular shank for indexable inserts — Part 5: Style F
ISO 5610-6:2014 Tool holders with rectangular shank for indexable inserts — Part 6: Style G
ISO 5610-7:2014 Tool holders with rectangular shank for indexable inserts — Part 7: Style J
ISO 5610-8:2014 Tool holders with rectangular shank for indexable inserts — Part 8: Style K
ISO 5610-9:2014 Tool holders with rectangular shank for indexable inserts — Part 9: Style L
ISO 5610-10:2014 Tool holders with rectangular shank for indexable inserts — Part 10: Style N
ISO 5610-11:2014 Tool holders with rectangular shank for indexable inserts — Part 11: Style R
ISO 5610-12:2014 Tool holders with rectangular shank for indexable inserts — Part 12: Style S
ISO 5610-13:2014 Tool holders with rectangular shank for indexable inserts — Part 13: Style T
ISO 5610-14:2014 Tool holders with rectangular shank for indexable inserts — Part 14: Style H
ISO 5610-15:2014 Tool holders with rectangular shank for indexable inserts — Part 15: Style V
TC 30 Measurement of fluid flow in closed conduits
ISO 4064-1:2014 Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements
ISO 4064-2:2014 Water meters for cold potable water and hot water — Part 2: Test methods
ISO 4064-3:2014 Water meters for cold potable water and hot water — Part 3: Test report format
ISO 4064-4:2014 Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
ISO 4064-5:2014 Water meters for cold potable water and hot water — Part 5: Installation requirements
TC 31 Tyres, rims and valves
ISO 4250-1:2014 Earth-mover tyres and rims — Part 1: Tyre designation and dimensions
ISO 4250-2:2014 Earth-mover tyres and rims — Part 2: Loads and inflation pressures
ISO 5775-1:2014 Bicycle tyres and rims — Part 1: Tyre designations and dimensions
TC 33 Refractories
ISO 10081-4:2014 Classification of dense shaped refractory products — Part 4: Special products
TC 34 Food products
ISO 15163:2012 Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of chymosin and bovine pepsin contents
ISO/TS 17758:2014 Instant dried milk — Determination of the dispersibility and wettability
ISO/TR 6579-3:2014 Microbiology of the food chain — Horizontal method for the detection, enumeration and serotyping of Salmonella — Part 3: Guidelines for serotyping of Salmonella spp.
ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils — Determination by capillary gas chromatography
ISO 18301:2014 Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscillating U-tube method
ISO 22004:2014 Food safety management systems — Guidance on the application of ISO 22000
TC 38 Textiles
ISO 11092:2014 Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 18184:2014 Textiles — Determination of antiviral activity of textile products
ISO 105-B01:2014 Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight
ISO 105-B02:2014 Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
TC 43 Acoustics
ISO 12913-1:2014 Acoustics — Soundscape — Part 1: Definition and conceptual framework
TC 44 Welding and allied processes
ISO 9453:2014 Soft solder alloys — Chemical compositions and forms
TC 45 Rubber and rubber products
ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
ISO 8330:2014 Rubber and plastics hoses and hose assemblies — Vocabulary
ISO 815-1:2014 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
ISO 6101-3:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
ISO 6101-4:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
ISO 18766:2014 Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide
ISO 249:2014 Rubber, raw natural — Determination of dirt content
TC 46 Information and documentation
ISO 28560-1:2014 Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation
ISO 28560-2:2014 Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
ISO 28560-3:2014 Information and documentation — RFID in libraries — Part 3: Fixed length encoding
TC 54 Essential oils
ISO 16385:2014 Essential oil of molle (Schinus areira L.), Argentinean type
TC 58 Gas cylinders
ISO 11119-2:2012/Amd 1:2014 Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners — Amendment 1
TC 59 Buildings and civil engineering works
ISO/TR 15686-11:2014 Buildings and constructed assets — Service life planning— Part 11: Terminology
TC 60 Gears
ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles
TC 61 Plastics
ISO 1887:2014 Textile glass — Determination of combustible-matter content
ISO 10122:2014 Reinforcement materials — Tubular braided sleeves — Basis for a specification
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 16530-2:2014 Well integrity — Part 2: Well integrity for the operational phase
TC 84 Devices for administration of medicinal products and catheters
ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84 — Devices for administration of medicinal products and catheters
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 16424:2012 Nuclear energy — Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
TC 92 Fire safety
ISO 14934-4:2014 Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TR 12468-3:2014 External exposure of roofs to fire— Part 3: Commentary
TC 94 Personal safety — Protective clothing and equipment
ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear
TC 96 Cranes
ISO 12482:2014 Cranes — Monitoring for crane design working period
ISO 16715:2014 Cranes — Hand signals used with cranes
TC 106 Dentistry
ISO 15841:2014 Dentistry — Wires for use in orthodontics
TC 108 Mechanical vibration, shock and condition monitoring
ISO 20283-4:2012/Amd 1:2014 Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of vibration of the ship propulsion machinery — Amendment 1
TC 119 Powder metallurgy
ISO 4490:2014 Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
TC 131 Fluid power systems
ISO 10766:2014 Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
TC 145 Graphical symbols
ISO 3864-3:2012 Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
TC 146 Air quality
ISO 22262-2:2014 Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
ISO 16000-30:2014 Indoor air — Part 30: Sensory testing of indoor air
TC 150 Implants for surgery
ISO 14708-1:2014 Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 4074:2014 Natural rubber latex male condoms — Requirements and test methods
TC 159 Ergonomics
ISO 24504:2014 Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23551-6:2014 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 6: Thermoelectric flame supervision controls
TC 172 Optics and photonics
ISO 10109:2014 Optics and photonics — Guidance for the selection of environmental tests
ISO 15362:2014 Stereomicroscopes — Information provided to the user
ISO 17123-1:2014 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 1: Theory
ISO 11979-2:2014 Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods
ISO 11979-7:2014 Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations
ISO 11979-9:2006/Amd 1:2014 Ophthalmic implants — Intraocular lenses — Part 9: Multifocal intraocular lenses — Amendment 1
ISO 13212:2014 Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life
TC 178 Lifts, escalators and moving walks
ISO/TS 18870:2014 Lifts (elevators) — Requirements for lifts used to assist in building evacuation
TC 181 Safety of toys
ISO 8124-2:2014 Safety of toys — Part 2: Flammability
ISO 8124-6:2014 Safety of toys — Part 6: Certain phthalate esters in toys and children's products
ISO/TR 8124-8:2014 Safety of toys — Part 8: Age determination guidelines
TC 188 Small craft
ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
TC 189 Ceramic tile
ISO 10545-4:2014 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
TC 194 Biological and clinical evaluation of medical devices
ISO/TR 37137:2014 Cardiovascular biological evaluation of medical devices — Guidance for absorbable implants
TC 195 Building construction machinery and equipment
ISO 21573-1:2014 Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications
TC 201 Surface chemical analysis
ISO 13095:2014 Surface Chemical Analysis — Atomic force microscopy — Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
TC 206 Fine ceramics
ISO 17947:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15189:2012 Medical laboratories — Requirements for quality and competence[MM1]
TC 213 Dimensional and geometrical product specifications and verification
ISO 2538-1:2014 Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes
ISO 2538-2:2014 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
TC 215 Health informatics
ISO/HL7 21731:2014 Health informatics — HL7 version 3 — Reference information model — Release 4
TC 244 Industrial furnaces and associated processing equipment
ISO 13577-4:2014 Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
TC 254 Safety of amusement rides and amusement devices
ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers
TC 261 Additive manufacturing
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
ISO 17296-4:2014 Additive manufacturing — General principles — Part 4: Overview of data processing
CASCO Committee on conformity assessment
ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection
JTC 1 Information technology
ISO/IEC 10646:2014 Information technology — Universal Coded Character Set (UCS)
ISO/IEC 9834-8:2014 Information technology — Procedures for the operation of object identifier registration authorities — Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
ISO/IEC 13157-1:2014 Information technology — Telecommunications and information exchange between systems — NFC Security — Part 1: NFC-SEC NFCIP-1 security services and protocol
ISO/IEC 19369:2014 Information technology — Telecommunications and information exchange between systems — NFCIP-2 test methods
ISO/IEC 24771:2014 Information technology — Telecommunications and information exchange between systems — MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
ISO/IEC TR 29110-5-6-2:2014 Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-6-2: Systems engineering — Management and engineering guide: Generic profile group: Basic profile
ISO/IEC 7811-1:2014 Identification cards — Recording technique — Part 1: Embossing
ISO/IEC 7811-2:2014 Identification cards — Recording technique — Part 2: Magnetic stripe — Low coercivity
ISO/IEC 7811-6:2014 Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity
ISO/IEC 7811-7:2014 Identification cards — Recording technique — Part 7: Magnetic stripe — High coercivity, high density
ISO/IEC 7816-4:2013/Cor 1:2014 Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange — Technical Corrigendum 1
ISO/IEC 8484:2014 Information technology — Magnetic stripes on savingsbooks
ISO/IEC 24764:2010/Amd 1:2014 Information technology — Generic cabling systems for data centres — Amendment 1
ISO/IEC 14496-10:2014 Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding
ISO/IEC 23000-10:2012/Amd 1:2014 Information technology — Multimedia application format (MPEG-A) — Part 10: Surveillance application format — Amendment 1: Conformance and reference software
ISO/IEC 23003-2:2010/Cor 2:2014 Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Technical Corrigendum 2
ISO/IEC 29167-1:2014 Information technology — Automatic identification and data capture techniques — Part 1: Security services for RFID air interfaces
ISO/IEC 26300:2006/Amd 1:2012/Cor 1:2014 Information technology — Open Document Format for Office Applications (OpenDocument) v1.0 — Amendment 1: Open Document Format for Office Applications (OpenDocument) v1.1 — Technical Corrigendum 1
ISO/IEC 26300:2006/Cor 3:2014 Information technology — Open Document Format for Office Applications (OpenDocument) v1.0 — Technical Corrigendum 3
ISO/IEC 19788-1:2011/Amd 1:2014 Information technology — Learning, education and training — Metadata for learning resources — Part 1: Framework — Amendment 1
ISO/IEC 19794-2:2005/Amd 1:2010/Cor 2:2014 Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Detailed description of finger minutiae location, direction, and type — Technical Corrigendum 2

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków