Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w czerwcu 2017 roku | | Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJ Certyfikat ISO , Szkolenie, Audyt, etc. - IKMJISO.org – normy opublikowane w czerwcu 2017 roku | ISO.org – normy opublikowane w czerwcu 2017 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ ISO.org – normy opublikowane w czerwcu 2017 roku – Certyfikat ISO , Szkolenie, Audyt, etc. – IKMJ
Nowa norma ISO

ISO.org – normy opublikowane w czerwcu 2017 roku

Nowe normy i standardy opublikowane w czerwcu 2017 roku:
* Dostępne tylko w języku angielskim

** Francuska wersja standardu wcześniej publikowana wyłącznie w języku angielskim

 

Grupa cenowa
TC 5   Ferrous metal pipes and metallic fittings
ISO 18468:2017 * Ductile iron fittings, accessories and their joints and valves — Epoxy coating B
TC 6   Paper, board and pulps
ISO 11093-8:2017 Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis B
TC 8   Ships and marine technology
ISO 20438:2017 * Ships and marine technology — Offshore mooring chains D
TC 17   Steel
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing D
TC 20   Aircraft and space vehicles
ISO 2635:2003/Amd 1:2017 * Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics — Amendment 1: Correction of table 1 XZ
ISO 17770:2017 * Space systems — Cube satellites (CubeSats) B
ISO 19923:2017 * Space environment (natural and artificial) — Plasma environments for generation of worst case electrical potential differences for spacecraft C
TC 21   Equipment for fire protection and fire fighting
ISO/TS 7240-29:2017 * Fire detection and alarm systems — Part 29: Video fire detectors H
TC 29   Small tools
ISO/TS 13399-60:2014 Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems H
ISO 2725-1:2017 Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets B
ISO 2725-2:2017 Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets („impact”) B
ISO 2725-3:2017 Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets („non-impact”) A
TC 34   Food products
ISO 10272-1:2017 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 1: Detection method D
ISO 10272-2:2017 Microbiology of the food chain — Horizontal method for detection and enumeration of Campylobacter spp. — Part 2: Colony-count technique D
ISO 19020:2017 Microbiology of the food chain — Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs D
ISO 19343:2017 Microbiology of the food chain — Detection and quantification of histamine in fish and fishery products — HPLC method C
ISO 21528-1:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Enterobacteriaceae — Part 1: Detection of Enterobacteriaceae C
ISO 21528-2:2017 Microbiology of the food chain — Horizontal method for the detection and enumeration of Enterobacteriaceae — Part 2: Colony-count technique C
TC 35   Paints and varnishes
ISO 19403-1:2017 * Paints and varnishes — Wettability — Part 1: Terminology and general principles B
ISO 19403-2:2017 * Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle C
ISO 19403-3:2017 * Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method B
ISO 19403-4:2017 * Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension B
ISO 19403-5:2017 * Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy A
ISO 19403-6:2017 * Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle B
ISO 19403-7:2017 * Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) C
TC 43   Acoustics
ISO 532-1:2017 * Acoustics — Methods for calculating loudness — Part 1: Zwicker method G
ISO 532-2:2017 * Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method E
TC 45   Rubber and rubber products
ISO 6472:2017 Rubber compounding ingredients — Abbreviated terms C
ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance B
ISO 4662:2017 Rubber, vulcanized or thermoplastic — Determination of rebound resilience E
ISO 5600:2017 * Rubber — Determination of adhesion to rigid materials using conical shaped parts B
ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures A
ISO 20299-2:2017 Film for wrapping rubber bales — Part 2: Natural rubber A
TC 58   Gas cylinders
ISO 13338:2017 * Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection of cylinder valve outlets B
TC 61   Plastics
ISO/TS 15791-2:2017 * Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products C
ISO 22007-4:2017 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method C
ISO 15064:2017 * Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI) B
TC 67   Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings E
TC 77   Products in fibre reinforced cement
ISO 8336:2017 * Fibre-cement flat sheets — Product specification and test methods F
TC 83   Sports and other recreational facilities and equipment
ISO 19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods F
ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation E
TC 85   Nuclear energy, nuclear technologies, and radiological protection
ISO 12800:2017 Nuclear fuel technology — Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method B
TC 92   Fire safety
ISO/TR 16576:2017 * Fire safety engineering — Examples of fire safety objectives, functional requirements and safety criteria H
TC 105 Steel wire ropes
ISO 2408:2017 * Steel wire ropes — Requirements F
TC 106   Dentistry
ISO/TR 18845:2017 Dentistry — Test methods for machining accuracy of computer-aided milling machines E
TC 113   Hydrometry
ISO 4359:2013/Amd 1:2017 * Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes — Amendment 1 XZ
TC 123   Plain bearings
ISO 4378-1:2017 Plain bearings — Terms, definitions, classification and symbols — Part 1: Design, bearing materials and their properties F
ISO 4378-2:2017 Plain bearings — Terms, definitions, classification and symbols — Part 2: Friction and wear B
ISO 4378-3:2017 Plain bearings — Terms, definitions, classification and symbols — Part 3: Lubrication D
TC 131   Fluid power systems
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies B
TC 133   Clothing sizing systems – size designation, size measurement methods and digital fittings
ISO 5971:2017 Size designation of clothes — Tights B
TC 138   Plastics pipes, fittings and valves for the transport of fluids
ISO 7510:2017 * Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents A
ISO 16611:2017 * Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests D
ISO/TS 20656-1:2017 * Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes D
TC 146   Air quality
ISO/TS 20593:2017 Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC-MS method E
TC 147   Water quality
ISO 13843:2017 Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods G
ISO 20227:2017 * Water quality — Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza — Method using a stock culture independent microbiotest B
TC 150   Implants for surgery
ISO 7199:2016 Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) C
ISO 11491:2017 * Implants for surgery — Determination of impact resistance of ceramic femoral heads for hip joint prostheses B
ISO 18192-3:2017 * Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions C
TC 155   Nickel and nickel alloys
ISO 9725:2017 Nickel and nickel alloy forgings C
TC 163   Thermal performance and energy use in the built environment
ISO 17772-1:2017 * Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings G
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures H
ISO/TR 52000-2:2017 * Energy performance of buildings — Overarching EPB assessment — Part 2: Explanation and justification of ISO 52000-1 H
ISO 52003-1:2017 Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance E
ISO/TR 52003-2:2017 * Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 2: Explanation and justification of ISO 52003-1 E
ISO 6946:2017 Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods F
ISO 10077-1:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General F
ISO 10077-2:2017 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames G
ISO 10211:2017 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations G
ISO 12631:2017 Thermal performance of curtain walling — Calculation of thermal transmittance F
ISO 13370:2017 Thermal performance of buildings — Heat transfer via the ground — Calculation methods F
ISO 13786:2017 Thermal performance of building components — Dynamic thermal characteristics — Calculation methods D
ISO 13789:2017 Thermal performance of buildings — Transmission and ventilation heat transfer coefficients — Calculation method D
ISO 14683:2017 Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values D
ISO 52010-1:2017 Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data for energy calculations E
ISO/TR 52010-2:2017 * Energy performance of buildings – External climatic conditions — Part 2: Explanation and justification of ISO 52010-1 D
ISO 52016-1:2017 Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures H
ISO/TR 52016-2:2017 * Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1 H
ISO 52017-1:2017 Energy performance of buildings — Sensible and latent heat loads and internal temperatures — Part 1: Generic calculation procedures E
ISO 52018-1:2017 Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 1: Overview of options F
ISO/TR 52018-2:2017 * Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 2: Explanation and justification of ISO 52018-1 F
ISO/TR 52019-2:2017 * Energy performance of buildings — Hygrothermal performance of building components and building elements — Part 2: Explanation and justification G
ISO 52022-1:2017 Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing C
ISO/TR 52022-2:2017 Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 2: Explanation and justification F
ISO 52022-3:2017 Energy performance of buildings — Thermal, solar and daylight properties of building components and elements — Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing E
TC 164   Mechanical testing of metals
ISO 24213:2017 * Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending B
ISO 1099:2017 * Metallic materials — Fatigue testing — Axial force-controlled method D
TC 165   Timber structures
ISO 8375:2017 * Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties D
TC 168   Prosthetics and orthotics
ISO 8548-5:2003 Prosthetics and orthotics — Limb deficiencies — Part 5: Description of the clinical condition of the person who has had an amputation A
TC 171   Document management applications
ISO 18829:2017 * Document management — Assessing ECM/EDRM implementations — Trustworthiness B
ISO 22938:2017 * Document management  — Electronic content/document management (CDM) data interchange format C
TC 172   Optics and photonics
ISO 8255-1:2017 * Microscopes — Cover glasses — Part 1: Dimensional tolerances, thickness and optical properties A
TC 173   Assistive products for persons with disability
ISO 15621:2017 * Absorbent incontinence aids for urine and/or faeces — General guidelines on evaluation B
TC 183   Copper, lead, zinc and nickel ores and concentrates
ISO 11790:2017 * Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems C
ISO 11794:2017 * Copper, lead, zinc and nickel concentrates — Sampling of slurries F
TC 195   Building construction machinery and equipment
ISO 19720-1:2017 * Building construction machinery and equipment — Plants for the preparation of concrete and mortar — Part 1: Terminology and commercial specifications D
TC 198   Sterilization of health care products
ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control F
TC 204   Intelligent transport systems
ISO 12813:2015/Amd 1:2017 * Electronic fee collection — Compliance check communication for autonomous systems — Amendment 1 XZ
ISO 13111-1:2017 * Intelligent transport systems (ITS) — The use of personal ITS station to support ITS service provision for travellers — Part 1: General information and use case definitions E
ISO 13141:2015/Amd 1:2017 * Electronic fee collection — Localisation augmentation communication for autonomous systems — Amendment 1 XZ
ISO 15638-10:2017 * Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 10: Emergency messaging system/eCall F
ISO 15638-18:2017 * Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 18: ADR (Dangerous Goods) G
ISO 17361:2017 * Intelligent transport systems — Lane departure warning systems — Performance requirements and test procedures B
ISO/TS 21219-7:2017 * Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 7: Location referencing container (TPEG2-LRC) C
ISO/TS 21219-22:2017 * Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 22: OpenLR location referencing (TPEG2-OLR) G
TC 205   Building environment design
ISO 16484-5:2017 * Building automation and control systems (BACS) — Part 5: Data communication protocol H
TC 206   Fine ceramics
ISO 19628:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical properties of ceramic composites — Determination of specific heat capacity D
TC 207   Environmental management
ISO/TR 14073:2017 * Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046 G
TC 210   Quality management and corresponding general aspects for medical devices
ISO/TR 80002-2:2017 * Medical device software — Part 2: Validation of software for medical device quality systems H
TC 215   Health informatics
ISO/TR 18638:2017 * Health informatics — Guidance on health information privacy education in healthcare organizations E
TC 217   Cosmetics
ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould D
ISO/TR 18818:2017 * Cosmetics — Analytical method — Detection and quantitative determination of Diethanolamine (DEA) by GC/MS B
TC 219   Floor coverings
ISO 11378-2:2001/Amd 1:2017 Textile floor coverings — Laboratory soiling tests — Part 2: Drum test — Amendment 1 XZ
TC 227   Springs
ISO 26910-1:2009/Amd 1:2017 Springs — Shot peening — Part 1: General procedures — Amendment 1 XZ
TC 229   Nanotechnologies
ISO/TR 19601:2017 * Nanotechnologies — Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) G
ISO/TS 80004-11:2017 Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms B
TC 281   Fine bubble technology
ISO 20480-1:2017 * Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 1: Terminology A
TMBG   Technical Management Board – groups
ISO 10377:2013 Consumer product safety — Guidelines for suppliers F
CASCO   Committee on conformity assessment
ISO/IEC TR 17028:2017 * Conformity assessment — Guidelines and examples of a certification scheme for services E
JTC 1   Information technology
ISO/IEC 29341-1-2:2017 * Information technology — UPnP Device Architecture — Part 1-2: UPnP Device Architecture Version 2.0 H
ISO/IEC 29341-30-1:2017 * Information technology — UPnP Device Architecture — Part 30-1: IoT management and control device control protocol — IoT management and control architecture overview F
ISO/IEC 29341-30-2:2017 * Information technology — UPnP Device Architecture — Part 30-2: IoT management and control device control protocol — IoT management and control device B
ISO/IEC 29341-30-10:2017 * Information technology — UPnP Device Architecture — Part 30-10: IoT management and control device control protocol — Data store service F
ISO/IEC 29341-30-11:2017 * Information technology — UPnP Device Architecture — Part 30-11: IoT management and control device control protocol — IoT management and control data model service H
ISO/IEC 29341-30-12:2017 * Information technology — UPnP Device Architecture — Part 30-12: IoT management and control device control protocol — IoT management and control transport generic service D
ISO/IEC/IEEE 15289:2017 * Systems and software engineering — Content of life-cycle information items (documentation) H
ISO/IEC TS 25011:2017 * Information technology — Systems and software quality requirements and evaluation (SQuaRE) — Service quality models D
ISO/IEC 29134:2017 * Information technology — Security techniques — Guidelines for privacy impact assessment F
ISO/IEC 18477-7:2017 * Information technology — Scalable compression and coding of continuous-tone still images — Part 7: HDR Floating-Point Coding F
ISO/IEC 20000-6:2017 * Information technology — Service management — Part 6: Requirements for bodies providing audit and certification of service management systems C
Zobacz podobne  ISO.org – normy opublikowane w maju 2017 roku

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości

Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków