Nowa norma ISO

ISO.org – normy opublikowane w grudniu 2019 roku

Nowe normy i standardy opublikowane w grudniu 2019 roku:

 

 

Price group

 

TC 8 Ships and marine technology
ISO 23121-1:2019 en Ships and marine technology — Inflatable buoyancy support systems against flooding of ships — Part 1: Gas supply system A
ISO 23121-2:2019 en Ships and marine technology — Inflatable buoyancy support systems against flooding of ships — Part 2: Buoyancy chamber B
ISO 23430:2019 en Ships and marine technology — Specification of high manganese austenitic steel thin strips used for LNG tanks on board ships A
TC 12 Quantities and units
ISO 80000-2:2019 fr Quantities and units — Part 2: Mathematics F
ISO 80000-3:2019 fr Quantities and units — Part 3: Space and time B
ISO 80000-4:2019 fr Quantities and units — Part 4: Mechanics C
ISO 80000-5:2019 fr Quantities and units — Part 5: Thermodynamics C
ISO 80000-7:2019 fr Quantities and units — Part 7: Light and radiation E
ISO 80000-9:2019 fr Quantities and units — Part 9: Physical chemistry and molecular physics C
ISO 80000-10:2019 fr Quantities and units — Part 10: Atomic and nuclear physics F
ISO 80000-11:2019 fr Quantities and units — Part 11: Characteristic numbers F
ISO 80000-12:2019 fr Quantities and units — Part 12: Condensed matter physics C
TC 17 Steel
ISO 643:2019 en

fr

Steels — Micrographic determination of the apparent grain size D
TC 20 Aircraft and space vehicles
ISO 14620-2:2019 en Space systems — Safety requirements — Part 2: Launch site operations C
ISO 16698:2019 en Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity D
TC 21 Equipment for fire protection and fire fighting
ISO 6183:2009/Amd 2:2019 en Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation — Amendment 2 XZ
TC 22 Road vehicles
ISO 13400-2:2019 en Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services G
ISO 19072-2:2019 en Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements D
ISO 19585:2019 en Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Steady-state circular driving behavior C
ISO 19586:2019 en Heavy commercial vehicles and buses — Vehicle dynamics simulation and validation — Lateral dynamic stability of vehicle combinations B
ISO 20766-10:2019 en Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 10: Gas-tight housing A
ISO 20766-12:2019 en Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 12: Non-return valve A
ISO 21058:2019 en Road vehicles — Dimethyl Ether (DME) refuelling connector D
ISO 22760-1:2019 en Road vehicles — Dimethyl Ether (DME) fuel system components — Part 1: General requirements and definitions B
ISO 22760-2:2019 en Road vehicles — Dimethyl Ether (DME) fuel system components — Part 2: Performance and general test methods B
TC 23 Tractors and machinery for agriculture and forestry
ISO 28139:2019 en

fr

Equipment for crop protection — Knapsack combustion engine-driven airblast sprayers — Safety and environmental requirements and test methods F
TC 27 Coal and coke
ISO 15585:2019 en Hard coal — Determination of caking index B
TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 6614:1994/Amd 1:2019 en Petroleum products — Determination of water separability of petroleum oils and synthetic fluids — Amendment 1 XZ
ISO 9120:1997/Amd 1:2019 en Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method — Amendment 1 XZ
TC 29 Small tools
ISO 21223:2019 en

fr

Tools for pressing — Vocabulary A
TC 34 Food products
ISO/TS 26030:2019 en Social responsibility and sustainable development — Guidance on using ISO 26000:2010 in the food chain F
ISO 3103:2019 en Tea — Preparation of liquor for use in sensory tests B
TC 35 Paints and varnishes
ISO 3233-1:2019 fr Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes’ principle C
TC 37 Language and terminology
ISO 24617-9:2019 en Language resource management — Semantic annotation framework — Part 9: Reference annotation framework (RAF) E
ISO 20539:2019 en Translation, interpreting and related technology — Vocabulary A
TC 38 Textiles
ISO 20705:2019 en

fr

Textiles — Quantitative microscopical analysis — General principles of testing C
ISO 20706-1:2019 en

fr

Textiles — Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends — Part 1: Fibre identification using microscopy methods E
ISO 3175-2:2017 en Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene B
ISO 3175-3:2017 en Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents B
ISO 3175-4:2018 en Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning B
TC 39 Machine tools
ISO 19085-10:2018 en

fr

Woodworking machines — Safety — Part 10: Building site saws (contractor saws) free
TC 42 Photography
ISO/TS 19567-2:2019 en Photography — Digital cameras — Part 2: Texture analysis using stochastic pattern D
TC 43 Acoustics
ISO/TS 12913-3:2019 en Acoustics — Soundscape — Part 3: Data analysis D
TC 46 Information and documentation
ISO 15511:2019 en Information and documentation — International standard identifier for libraries and related organizations (ISIL) B
ISO 15836-2:2019 en Information and documentation — The Dublin Core metadata element set — Part 2: DCMI Properties and classes D
ISO 21246:2019 en Information and documentation — Key indicators for museums G
ISO 21110:2019 fr Information and documentation — Emergency preparedness and response G
TC 59 Buildings and civil engineering works
ISO 15392:2019 en

fr

Sustainability in buildings and civil engineering works — General principles D
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 19900:2019 fr Petroleum and natural gas industries — General requirements for offshore structures G
TC 69 Applications of statistical methods
ISO 5725-2:2019 en Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method G
ISO/TS 16355-6:2019 en Applications of statistical and related methods to new technology and product development process — Part 6: Guidance for QFD-related approaches to optimization C
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/TS 23128:2019 en

fr

Medical devices — Transfusion set and blood bag compatibility test method B
TC 84 Devices for administration of medicinal products and catheters
ISO 20696:2018 en

fr

Sterile urethral catheters for single use E
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/ASTM 51276:2019 en Practice for use of a polymethylmethacrylate dosimetry system A
ISO 11665-8:2019 en Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings D
ISO 18589-4:2019 en Measurement of radioactivity in the environment — Soil — Part 4: Plutonium 238 and plutonium 239 + 240 — Test method using alpha spectrometry D
ISO 18589-5:2019 en Measurement of radioactivity in the environment — Soil — Part 5: Strontium 90 — Test method using proportional counting or liquid scintillation counting E
ISO 18589-6:2019 en Measurement of radioactivity in the environment — Soil — Part 6: Gross alpha and gross beta activities — Test method using gas-flow proportional counting B
ISO 22127:2019 en Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy C
ISO 10276:2019 en

fr

Nuclear energy — Fuel technology — Trunnion systems for packages used to transport radioactive material D
TC 94 Personal safety — Personal protective equipment
ISO 374-2:2019 fr Protective gloves against dangerous chemicals and micro-organisms — Part 2: Determination of resistance to penetration B
ISO 374-4:2019 fr Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals B
ISO 16073-4:2019 en Wildland firefighting personal protective equipment — Requirements and test methods — Part 4: Gloves C
ISO 16073-5:2019 en Wildland firefighting personal protective equipment — Requirements and test methods — Part 5: Helmets D
TC 108 Mechanical vibration, shock and condition monitoring
ISO 7626-5:2019 en Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure E
ISO 16063-34:2019 en Methods for the calibration of vibration and shock transducers — Part 34: Testing of sensitivity at fixed temperatures C
ISO 14830-1:2019 en Condition monitoring and diagnostics of machine systems — Tribology-based monitoring and diagnostics — Part 1: General requirements and guidelines F
TC 110 Industrial trucks
ISO 20297-1:2017 fr Industrial trucks — Lorry-mounted trucks — Part 1: Safety requirements and verification F
TC 119 Powder metallurgy
ISO 10070:2019 en

fr

Metallic powders — Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions C
TC 121 Anaesthetic and respiratory equipment
ISO 8836:2019 en

fr

Suction catheters for use in the respiratory tract D
TC 126 Tobacco and tobacco products
ISO 22634-1:2019 en

fr

Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS — Part 1: Method using methanol as extraction solvent B
ISO 22634-2:2019 en

fr

Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS — Part 2: Method using cyclohexane as extraction solvent B
TC 130 Graphic technology
ISO 12641-2:2019 en Graphic technology — Prepress digital data exchange — Part 2: Advanced colour targets for input scanner calibration C
ISO/TS 18621-11:2019 en Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis C
TC 131 Fluid power systems
ISO 10763:2019 en Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures A
TC 135 Non-destructive testing
ISO 21432:2019 en Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction F
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 4065:2018 en Thermoplastics pipes — Universal wall thickness table B
ISO/TS 16943:2019 en Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing D
TC 146 Air quality
IEC 62990-1:2019 en

fr

Workplace Atmospheres — Part 1: Gas detectors — Performance requirements of detectors for toxic gases XH
ISO 14966:2019 en Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method F
TC 147 Water quality
ISO 9698:2019 fr Water quality — Tritium — Test method using liquid scintillation counting D
TC 150 Implants for surgery
ISO 18241:2016/Amd 1:2019 en Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems — Venous bubble traps — Amendment 1: Connectors XZ
ISO 14708-7:2019 en

fr

Implants for surgery — Active implantable medical devices — Part 7: Particular requirements for cochlear and auditory brainstem implant systems G
TC 156 Corrosion of metals and alloys
ISO 18086:2019 en

fr

Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria F
TC 159 Ergonomics
ISO/TS 9241-126:2019 en Ergonomics of human-system interaction — Part 126: Guidance on the presentation of auditory information D
TC 172 Optics and photonics
ISO 19056-2:2019 en Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy B
ISO 21073:2019 en

fr

Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging C
ISO 8596:2017/Amd 1:2019 en Ophthalmic optics — Visual acuity testing — Standard and clinical optotypes and their presentation — Amendment 1 XZ
ISO 15902:2019 en

fr

Optics and photonics — Diffractive optics — Vocabulary A
TC 174 Jewellery and precious metals
ISO 8654:2018/Amd 1:2019 en Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1 XZ
TC 176 Quality management and quality assurance
ISO 10015:2019 en

fr

Quality management — Guidelines for competence management and people development B
TC 184 Automation systems and integration
ISO 8000-63:2019 en Data quality — Part 63: Data quality management: Process measurement D
ISO 15926-10:2019 en Industrial automation systems and integration — Integration of life cycle data for process plants including oil and gas production facilities — Part 10: Conformance testing F
ISO 15704:2019 en Enterprise modelling and architecture — Requirements for enterprise-referencing architectures and methodologies G
ISO 16300-4:2019 en Automation systems and integration — Interoperability of capability units for manufacturing application solutions — Part 4: Capability unit assessment for the manufacturing application requirements D
TC 188 Small craft
ISO 10240:2019 en

fr

Small craft — Owner’s manual C
TC 190 Soil quality
ISO 21226:2019 en Soil quality — Guideline for the screening of soil polluted with toxic elements using soil magnetometry E
ISO 21286:2019 fr Soil quality — Identification of ecotoxicological test species by DNA barcoding D
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-7:2008/Amd 1:2019 en

fr

Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Amendment 1: Applicability of allowable limits for neonates and infants XZ
TC 198 Sterilization of health care products
ISO 11737-2:2019 en

fr

Sterilization of health care products — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process C
TC 202 Microbeam analysis
ISO 21466:2019 en Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM F
TC 204 Intelligent transport systems
ISO/TS 17187:2019 en Intelligent transport systems — Electronic information exchange to facilitate the movement of freight and its intermodal transfer — Governance rules to sustain electronic information exchange methods E
TC 206 Fine ceramics
ISO 21971:2019 en

fr

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of hoop tensile properties of tubes C
TC 207 Environmental management
ISO 14090:2019 es Adaptation to climate change — Principles, requirements and guidelines E
TC 210 Quality management and corresponding general aspects for medical devices
ISO 14971:2019 en

fr

Medical devices — Application of risk management to medical devices F
TC 211 Geographic information/Geomatics
ISO 19107:2019 en

fr

Geographic information — Spatial schema H
ISO 19116:2019 en

fr

Geographic information — Positioning services G
ISO/TR 19167:2019 en Application of ubiquitous public access to-geographic information to an air quality information service E
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 20776-1:2019 en

fr

Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases D
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-61:2015/Amd 1:2019 en

fr

Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters — Amendment 1 XZ
TC 217 Cosmetics
ISO 24444:2019 en

fr

Cosmetics — Sun protection test methods — In vivo determination of the sun protection factor (SPF) G
TC 218 Timber
ISO 3129:2019 en Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens B
TC 221 Geosynthetics
ISO 9863-1:2016/Amd 1:2019 en

fr

Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers — Amendment 1 XZ
ISO 12956:2019 en Geotextiles and geotextile-related products — Determination of the characteristic opening size C
TC 226 Materials for the production of primary aluminium
ISO 15379-1:2019 en Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure A
TC 229 Nanotechnologies
ISO/TS 10867:2019 en Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy C
ISO 20814:2019 en Nanotechnologies — Testing the photocatalytic activity of nanoparticles for NADH oxidation D
TC 249 Traditional Chinese medicine
ISO/TR 20498-5:2019 en Traditional Chinese medicine — Computerized tongue image analysis system — Part 5: Method of acquisition and expression of tongue colour and tongue coating colour C
ISO 22584:2019 en Traditional Chinese medicine — Angelica sinensis root C
TC 251 Asset management
ISO 55002:2018 es Asset management — Management systems — Guidelines for the application of ISO 55001 G
ISO/TS 55010:2019 fr Asset management — Guidance on the alignment of financial and non-financial functions in asset management F
TC 261 Additive manufacturing
ISO/ASTM 52907:2019 en

fr

Additive manufacturing — Feedstock materials — Methods to characterize metal powders D
TC 268 Sustainable cities and communities
ISO/TS 37107:2019 en Sustainable cities and communities — Maturity model for smart sustainable communities F
ISO 37123:2019 en Sustainable cities and communities — Indicators for resilient cities H
TC 279 Innovation management
ISO 56002:2019 es Innovation management — Innovation management system — Guidance D
TMBG Technical Management Board – groups
IWA 33-1:2019 en Technical guidelines for the development of small hydropower plants — Part 1: Vocabulary A
IWA 33-2:2019 en Technical guidelines for the development of small hydropower plants — Part 2: Site selection planning E
ISO Guide 82:2019 fr Guidelines for addressing sustainability in standards D
JTC 1 Information technology
ISO/IEC 14165-246:2019 en Information technology — Fibre channel — Part 246: Backbone — 6 (FC-BB-6) H
ISO/IEC/IEEE 16326:2019 en Systems and software engineering — Life cycle processes — Project management E
ISO/IEC/IEEE 21840:2019 en Systems and software engineering — Guidelines for the utilization of ISO/IEC/IEEE 15288 in the context of system of systems (SoS) G
ISO/IEC TS 33053:2019 en Information technology — Process assessment — Process Reference Model (PRM) for quality management G
ISO/IEC 7810:2019 en Identification cards — Physical characteristics B
ISO/IEC 10373-7:2019 en Cards and security devices for personal identification — Test methods — Part 7: Contactless vicinity objects G
ISO/IEC TR 24772-1:2019 en Programming languages — Guidance to avoiding vulnerabilities in programming languages — Part 1: Language-independent guidance H
ISO/IEC 14763-2:2019 en Information technology — Implementation and operation of customer premises cabling — Part 2: Planning and installation H
ISO/IEC 14776-415:2019 en Information technology — Small computer system interface (SCSI) — Part 415: SCSI architecture model – 5 (SAM-5) H
ISO/IEC 14776-481:2019 en Information technology — Small computer system interface (SCSI) — Part 481: Part 481:Security Features for SCSI Commands (SFSC) H
ISO/IEC 22505:2019 en Information technology — Method for the determination of ink cartridge yield for monochrome inkjet printers and multi-function devices that contain inkjet printer components D
ISO/IEC 10918-7:2019 en Information technology — Digital compression and coding of continuous-tone still images — Part 7: Reference software C
ISO/IEC 14496-3:2019 en Information technology — Coding of audio-visual objects — Part 3: Audio H
ISO/IEC 23001-15:2019 en Information technology — MPEG systems technologies — Part 15: Carriage of web resources in ISOBMFF D
ISO/IEC 23005-7:2019 en Information technology — Media context and control — Part 7: Conformance and reference software F
ISO/IEC 23009-1:2019 en Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats H
ISO/IEC 11179-7:2019 en Information technology — Metadata registries (MDR) — Part 7: Metamodel for data set registration F
ISO/IEC 20071-11:2019 en Information technology — User interface component accessibility — Part 11: Guidance on text alternatives for images F
ISO/IEC TS 19795-9:2019 en Information technology — Biometric performance testing and reporting — Part 9: Testing on mobile devices D
ISO/IEC 39794-1:2019 en Information technology — Extensible biometric data interchange formats — Part 1: Framework G
ISO/IEC 39794-4:2019 en Information technology — Extensible biometric data interchange formats — Part 4: Finger image data H
ISO/IEC 39794-5:2019 en Information technology — Extensible biometric data interchange formats — Part 5: Face image data H
ISO/IEC TR 23050:2019 fr Information technology — Data centres — Impact on data centre resource metrics of electrical energy storage and export B

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości


Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków



Dbamy o jakość!

Masz uwagi lub sugestie. Wypełnij krótką ANKIETĘ na temat naszej strony.

Szukaj we wszystkich serwisach IKMJ