> IKMJ |ISO.org – normy opublikowane w lipcu 2019 roku | IKMJ |ISO.org – normy opublikowane w lipcu 2019 roku | ISO.org – normy opublikowane w lipcu 2019 roku – IKMJ | ISO.org – normy opublikowane w lipcu 2019 roku – IKMJ |
Nowa norma ISO

ISO.org – normy opublikowane w lipcu 2019 roku

Nowe normy i standardy opublikowane w lipcu 2019 roku:
1 opóźniona publikacja wersji językowej
2 poprawiona wersja
3 wielojęzyczny dokument

 

 

Grupa cenowa

 

TC 2 Fasteners
ISO 3269:2019 en

fr

Fasteners — Acceptance inspection

B

ISO 4034:2012 fr2 Hexagon regular nuts (style 1) — Product grade C

A

TC 5 Ferrous metal pipes and metallic fittings
ISO 21053:2019 en

fr

Life cycle analysis and recycling of ductile iron pipes for water applications

C

TC 6 Paper, board and pulps
ISO 1762:2019 en

fr

Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C

B

ISO 12830:2019 en

fr

Paper, board, pulps and cellulose nanomaterials — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

D

TC 8 Ships and marine technology
ISO 21593:2019 en Ships and marine technology — Technical requirements for dry-disconnect/connect couplings for bunkering liquefied natural gas

C

ISO 15738:2019 en Ships and marine technology — Maritime safety — Gas inflation systems for inflatable life-saving appliances

C

ISO 19912:2019 en Ships and marine technology — Servicing of immersion suits, anti-exposure suits and constant wear suits

B

ISO 9089:2019 en Marine structures — Mobile offshore units — Mooring positioning windlasses and winches

B

ISO 25862:2019 en Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices

F

TC 17 Steel
ISO 6930:2019 en High yield strength steel plates and wide flats for cold forming — Delivery conditions

C

ISO 6306:2019 en Chemical analysis of steel — Order of listing elements in steel standards

A

ISO 4960:2019 en Steel strip, cold-reduced with a mass fraction of carbon over 0,25 %

C

TC 20 Aircraft and space vehicles
ISO 10795:2019 en Space systems — Programme management and quality — Vocabulary

F

ISO 24113:2019 en Space systems — Space debris mitigation requirements

C

ISO 26872:2019 en Space systems — Disposal of satellites operating at geosynchronous altitude

F

TC 21 Equipment for fire protection and fire fighting
ISO 7203-1:2019 en Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids

F

ISO 7203-2:2019 en Fire extinguishing media — Foam concentrates — Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids

F

ISO 7203-3:2019 en Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids

F

ISO 14520-5:2019 en Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant

B

ISO 14520-8:2019 en Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant

B

ISO 14520-9:2019 en Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant

B

ISO 14520-10:2019 en Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant

B

TC 22 Road vehicles
ISO 19072-1:2019 en Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition

B

ISO 22241-4:2019 en Diesel engines — NOx reduction agent AUS 32 — Part 4: Refilling interface

C

ISO 22241-5:2019 en Diesel engines — NOx reduction agent AUS 32 — Part 5: Refilling interface for passenger cars

C

ISO 16505:2019 en Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures

H

ISO 21755-1:2019 en Motorcycles — Measurement method for evaporative emissions — Part 1: SHED test procedure

D

TC 23 Tractors and machinery for agriculture and forestry
ISO 8437-1:2019 en

fr

Snow throwers — Safety requirements and test procedures — Part 1: Terminology and common tests

C

ISO 8437-2:2019 en

fr

Snow throwers — Safety requirements and test procedures — Part 2: Pedestrian-controlled snow throwers

C

ISO 8437-3:2019 en

fr

Snow throwers — Safety requirements and test procedures — Part 3: Ride-on snow throwers

D

ISO 8437-4:2019 en

fr

Snow throwers — Safety requirements and test procedures — Part 4: Additional national and regional requirements

C

TC 24 Particle characterization including sieving
ISO 18747-2:2019 en Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach

D

TC 25 Cast irons and pig irons
ISO 185:2019 en Grey cast irons — Classification

D

TC 27 Solid mineral fuels
ISO 925:2019 en Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method

B

TC 28 Petroleum and related products, fuels and lubricants from natural or synthetic sources
ISO 3924:2019 en Petroleum products — Determination of boiling range distribution — Gas chromatography method

F

ISO 21493:2019 en Petroleum products — Determination of turbidity point and aniline point equivalent

B

TC 29 Small tools
ISO/TS 13399-310:2017 fr1 Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

E

ISO/TS 13399-311:2016 fr1 Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers

D

ISO/TS 13399-312:2016 fr1 Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts

F

ISO/TS 13399-314:2018 fr1 Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts

D

ISO/TS 13399-315:2018 fr1 Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools

F

TC 31 Tyres, rims and valves
ISO 13325:2019 en

fr

Tyres — Coast-by methods for measurement of tyre-to-road sound emission

B

ISO 4251-1:2019 en

fr

Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 1: Tyre designation and dimensions, and approved rim contours

D

ISO 4251-2:2019 en

fr

Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines — Part 2: Tyre load ratings

D

TC 34 Food products
ISO 17059:2019 en

fr

Oilseeds — Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (rapid method)

A

ISO 17678:2019 fr1 Milk and milk products — Determination of milk fat purity by gas chromatographic analysis of triglycerides

D

ISO 15216-2:2019 en

fr

Microbiology of the food chain — Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR — Part 2: Method for detection

F

ISO 17410:2019 en

fr

Microbiology of the food chain — Horizontal method for the enumeration of psychrotrophic microorganisms

B

TC 35 Paints and varnishes
ISO 2808:2019 en

fr

Paints and varnishes — Determination of film thickness

F

ISO 22518:2019 en Paints and varnishes — Determination of solvents in water-thinnable coating materials — Gas-chromatographic method

B

ISO 22557:2019 en Paints and varnishes — Scratch test using a spring-loaded pen

C

ISO 22969:2019 en Paints and varnishes — Determination of solar reflectance

C

ISO 23496:2019 en Determination of pH value — Reference buffer solutions for the calibration of pH measuring equipment

C

ISO 23497:2019 en Determination of pH value — Technical buffer solutions for the calibration of technical measuring installations

B

ISO/TR 22770:2019 en Preparation of steel substrates before application of paints and related products — Analytical colorimetry method to support visual assessment of surface preparation grades

B

TC 36 Cinematography
ISO 4241:2019 en Cinematography — Projection film leader (time-based), trailer and cue marks — Specifications

B

TC 37 Language and terminology
ISO 24622-2:2019 en Language resource management — Component metadata infrasctructure (CMDI) — Part 2: Component metadata specification language

E

TC 38 Textiles
ISO 2307:2019 en

fr

Fibre ropes — Determination of certain physical and mechanical properties

D

ISO 9554:2019 en

fr

Fibre ropes — General specifications

F

TC 39 Machine tools
ISO 14955-4:2019 en

fr

Machine tools — Environmental evaluation of machine tools — Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency

H

TC 42 Photography
ISO 18949:2019 en Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions

B

ISO/TS 19567-2:2019 en Photography — Digital cameras — Part 2: Texture analysis using stochastic pattern

D

ISO 20954-1:2019 en Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems

F

ISO/TS 21139-21:2019 en Permanence and durability of commercial prints — Part 21: In-window display — Light and ozone stability

C

TC 43 Acoustics
ISO 5130:2019 en Acoustics — Measurements of sound pressure level emitted by stationary road vehicles

C

ISO 17208-2:2019 en Underwater acoustics — Quantities and procedures for description and measurement of underwater sound from ships — Part 2: Determination of source levels from deep water measurements

C

TC 44 Welding and allied processes
ISO 18592:2019 en

fr

Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens

E

ISO 3821:2019 en

fr

Gas welding equipment — Rubber hoses for welding, cutting and allied processes

C

ISO 15614-1:2017/Amd 1:2019 en

fr

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1

XZ

TC 45 Rubber and rubber products
ISO 1403:2019 en

fr

Rubber hoses, textile-reinforced, for general-purpose water applications — Specification

A

ISO 19013-1:2019 en Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels

C

ISO 813:2019 en

fr

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method

B

ISO 2285:2019 en

fr

Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

C

ISO 5893:2019 en

fr

Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification

A

ISO 8013:2019 en

fr

Rubber, vulcanized — Determination of creep in compression or shear

D

ISO 14309:2019 en Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity

C

ISO 20163:2019 en

fr

Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)

C

ISO 1656:2019 en

fr

Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content

D

TC 46 Information and documentation
ISO 21110:2019 en Information and documentation — Emergency preparedness and response

G

TC 58 Gas cylinders
ISO 10462:2013/Amd 1:2019 fr1 Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance — Amendment 1

XZ

TC 60 Gears
ISO/TS 6336-4:2019 en2 Calculation of load capacity of spur and helical gears — Part 4: Calculation of tooth flank fracture load capacity

E

TC 61 Plastics
ISO 527-1:2019 en

fr

Plastics — Determination of tensile properties — Part 1: General principles

D

ISO 11907-1:2019 en Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

A

ISO 4577:2019 en

fr

Plastics — Polypropylene and propylene-copolymers — Determination of thermal oxidative stability in air — Oven method

B

ISO 21970-1:2019 en

fr

Plastics — Polyketone (PK) moulding and extrusion materials — Part 1: Designation system and basis for specifications

B

ISO 21970-2:2019 en

fr

Plastics — Polyketone (PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

B

ISO 10123:2013 fr1 Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

B

ISO 11833-1:2019 en

fr

Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm

C

ISO 11963:2019 en

fr

Plastics — Polycarbonate sheets — Types, dimensions and characteristics

B

ISO 22631:2019 en

fr

Adhesives — Test methods for adhesives for floor and wall coverings — Peel test

B

ISO 22632:2019 en

fr

Adhesives — Test methods for adhesives for floor and wall coverings — Shear test

B

ISO 22633:2019 en

fr

Adhesives — Test methods for adhesives for floor coverings and wall coverings — Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive

B

ISO 22635:2019 en

fr

Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing

B

ISO 22637:2019 en

fr

Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhesive films and composites

A

ISO 20144:2019 en Fibre-reinforced plastic composites — Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes

E

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 20074:2019 en Petroleum and natural gas industry — Pipeline transportation systems — Geological hazard risk management for onshore pipeline

G

ISO 15136-1:2009 fr1 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps

H

ISO 13679:2019 en Petroleum and natural gas industries — Procedures for testing casing and tubing connections

A

ISO 19901-9:2019 en

fr

Petroleum and natural gas industries — Specific requirements for offshore structures — Part 9: Structural integrity management

H

ISO 19906:2019 en Petroleum and natural gas industries — Arctic offshore structures

H

TC 70 Internal combustion engines
ISO 8178-9:2019 en

fr

Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter

G

TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 10406-3:2019 en Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 3: CFRP strips

B

ISO 21914:2019 en Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

B

TC 79 Light metals and their alloys
ISO 20260:2019 en Magnesium and magnesium alloys — Determination of mercury

B

TC 83 Sports and other recreational facilities and equipment
ISO 20957-9:2016/Amd 1:2019 fr1 Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods — Amendment 1

XZ

TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 20785-4:2019 fr1 Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 4: Validation of codes

B

ISO 18256-2:2019 fr1 Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 2: Dissolution of MOX pellets and powders

B

TC 87 Cork
ISO 2386:2019 en

fr

Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Determination of moisture content

A

TC 91 Surface active agents
ISO 21264:2019 en Surface active agents — Detergents — Determination of alkylphenol ethoxylates

B

TC 92 Fire safety
ISO 26367-1:2019 en

fr

Guidelines for assessing the adverse environmental impact of fire effluents — Part 1: General

D

ISO 24678-1:2019 fr1 Fire safety engineering — Requirements governing algebraic formulae — Part 1: General requirements

A

TC 107 Metallic and other inorganic coatings
ISO 28763:2019 en

fr

Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and  gas-gas heat exchangers — Specifications

B

TC 108 Mechanical vibration, shock and condition monitoring
ISO 2631-5:2018 fr1 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple shocks

E

ISO 10813-2:2019 en Vibration-generating machines — Guidance for selection — Part 2: Equipment for dynamic structural testing

D

TC 112 Vacuum technology
ISO 3529-1:2019 en Vacuum technology — Vocabulary — Part 1: General terms

B

TC 115 Pumps
ISO 20361:2019 en

fr

Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy

D

TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-8:2009/Amd 2:2019 fr1 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 2: Oscillating knives (vibrating screen removal tools)

XZ

TC 119 Powder metallurgy
ISO 3252:2019 en

fr

Powder metallurgy — Vocabulary

A

TC 120 Leather
ISO 15115:2019 en Leather — Vocabulary

A

TC 121 Anaesthetic and respiratory equipment
ISO 5356-2:2012/Amd 1:2019 en

fr

Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors — Amendment 1

XZ

ISO 19223:2019 en Lung ventilators and related equipment — Vocabulary and semantics

A

TC 122 Packaging
ISO 22015:2019 en Packaging — Accessible design — Handling and manipulation

D

TC 123 Plain bearings
ISO 13939:2019 en

fr

Foil bearings — Performance testing of foil journal bearings — Testing of static load capacity, friction coefficient and lifetime

C

TC 126 Tobacco and tobacco products
ISO 8454:2007/Amd 2:2019 en

fr

Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method — Amendment 2

XZ

ISO 10362-1:2019 en

fr

Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method

B

ISO 2965:2019 en

fr

Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability

E

ISO 20193:2019 en

fr

Tobacco and tobacco products — Determination of the width of the strands of cut tobacco

B

TC 127 Earth-moving machinery
ISO 17757:2019 en

fr

Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety

F

TC 130 Graphic technology
ISO 21812-1:2019 en Graphic technology — Print product metadata for PDF files — Part 1: Architecture and core requirements for metadata

E

TC 131 Fluid power systems
ISO 4399:2019 en Fluid power systems and components — Connectors and associated components — Nominal pressures

A

ISO 5783:2019 en Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities

A

ISO 4409:2019 en

fr

Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance

D

TC 135 Non-destructive testing
ISO 16809:2017 fr1 Non-destructive testing — Ultrasonic thickness measurement

F

ISO 12718:2019 en,fr,other3 Non-destructive testing — Eddy current testing — Vocabulary

A

TC 137 Footwear sizing designations and marking systems
ISO 9407:2019 en Footwear sizing — Mondopoint system of sizing and marking

A

TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 9624:2019 en Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions

D

ISO 7685:2019 en Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness

B

ISO 16135:2006/Amd 1:2019 en

fr

Industrial valves — Ball valves of thermoplastics materials — Amendment 1

XZ

ISO 16136:2006/Amd 1:2019 en

fr

Industrial valves — Butterfly valves of thermoplastics materials — Amendment 1

XZ

ISO 16137:2006/Amd 1:2019 en

fr

Industrial valves — Check valves of thermoplastics materials — Amendment 1

XZ

ISO 16138:2006/Amd 1:2019 en

fr

Industrial valves — Diaphragm valves of thermoplastics materials — Amendment 1

XZ

ISO 16139:2006/Amd 1:2019 en

fr

Industrial valves — Gate valves of thermoplastics materials — Amendment 1

XZ

ISO 21787:2006/Amd 1:2019 en

fr

Industrial valves — Globe valves of thermoplastics materials — Amendment 1

XZ

TC 142 Cleaning equipment for air and other gases
ISO 15714:2019 en Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices

C

TC 145 Graphical symbols
ISO 7010:2019 en

fr

Graphical symbols — Safety colours and safety signs — Registered safety signs

H

ISO 7000:2019 en Graphical symbols for use on equipment — Registered symbols

A

TC 146 Air quality
ISO 16000-40:2019 en

fr

Indoor air — Part 40: Indoor air quality management system

D

TC 147 Water quality
ISO 5815-1:2019 en

fr

Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1: Dilution and seeding method with allylthiourea addition

D

TC 150 Implants for surgery
ISO 22622:2019 en

fr

Implants for surgery — Wear of total ankle-joint prostheses — Loading and displacement parameters for wear-testing machines with load or displacement control and corresponding environmental conditions for test

D

TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 19351:2019 en Fallopian rings — Requirements and test methods

E

TC 158 Analysis of gases
ISO 19229:2019 en

fr

Gas analysis — Purity analysis and the treatment of purity data

C

TC 159 Ergonomics
ISO 9241-210:2019 en

fr

Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems

E

ISO 10551:2019 en

fr

Ergonomics of the physical environment — Subjective judgement scales for assessing physical environments

E

TC 163 Thermal performance and energy use in the built environment
ISO 16536:2019 en

fr

Thermal insulating products for building applications — Determination of long-term water absorption by diffusion

A

TC 164 Mechanical testing of metals
ISO 20064:2019 en Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca

F

TC 171 Document management applications
ISO 22550:2019 en Document management — AFP interchange for PDF

E

TC 172 Optics and photonics
ISO/TR 14999-2:2019 en Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques

G

ISO 8600-3:2019 en Endoscopes — Medical endoscopes and endotherapy devices — Part 3: Determination of field of view and direction of view of endoscopes with optics

B

TC 174 Jewellery and precious metals
ISO 11494:2019 en Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element

A

ISO 11495:2019 en

fr

Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element

A

TC 176 Quality management and quality assurance
ISO 10007:2017 es2 Quality management — Guidelines for configuration management

B

TC 178 Lifts, escalators and moving walks
ISO 8100-1:2019 en2 Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts

H

TC 182 Geotechnics
ISO 17892-12:2018 fr1 Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits

E

ISO 22476-6:2018 fr1 Geotechnical investigation and testing — Field testing — Part 6: Self-boring pressuremeter test

D

ISO 22476-8:2018 fr1 Geotechnical investigation and testing — Field testing — Part 8: Full displacement pressuremeter test

D

TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 19976-1:2019 en Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 1: Flame atomic absorption spectrometric method

C

ISO 19976-2:2019 en Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method

B

TC 204 Intelligent transport systems
ISO 17573-1:2019 en Electronic fee collection — System architecture for vehicle-related tolling — Part 1: Reference model

F

ISO 21219-2:2019 en Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 2: UML modelling rules (TPEG2-UMR)

F

ISO 21219-3:2019 en Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules (TPEG2-UBCR)

D

ISO 21219-4:2019 en Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 4: UML to XML conversion rules

F

ISO 21219-5:2019 en Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW)

F

ISO 21219-6:2019 en Intelligent transport systems — Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 6: Message management container (TPEG2-MMC)

D

ISO 21219-18:2019 en Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application (TPEG2-TFP)

G

ISO/TR 21735:2019 en Intelligent transport systems — Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices

B

TC 206 Fine ceramics
ISO 20504:2019 en Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of compressive properties

C

ISO 27447:2019 en Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials

D

TC 211 Geographic information/Geomatics
ISO 19162:2019 en Geographic information — Well-known text representation of coordinate reference systems

H

TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TS 20914:2019 en Medical laboratories — Practical guidance for the estimation of measurement uncertainty

G

TC 215 Health informatics
ISO 12381:2019 en Health informatics — Explicit time-related expressions for healthcare-specific problems

D

ISO/TR 14872:2019 en Health informatics — Identification of medicinal products — Core principles for maintenance of identifiers and terms

B

ISO/TS 22558:2019 en Health informatics — Classification of traditional Chinese medicine data sets

C

TC 216 Footwear
ISO 17700:2019 en

fr

Footwear — Test methods for upper components and insocks — Colour fastness to rubbing and bleeding

C

TC 218 Timber
ISO 5323:2019 en

fr

Wood flooring and parquet — Vocabulary

A

TC 219 Floor coverings
ISO 10833:2017 fr1 Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test

A

ISO 16581:2014 fr1 Resilient and laminate floor coverings — Determination of the effect of simulated movement of a furniture leg

A

ISO 24334:2019 en Laminate floor coverings — Determination of locking strength for mechanically assembled panels

B

TC 221 Geosynthetics
ISO 13437:2019 en

fr

Geosynthetics — Installing and retrieving samples in the field for durability assessment

B

TC 224 Service activities relating to drinking water supply, wastewater and stormwater systems
ISO 46001:2019 en Water efficiency management systems — Requirements with guidance for use

F

TC 226 Materials for the production of primary aluminium
ISO 10143:2019 en Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules

A

ISO 23028:2019 en Aluminium oxide primarily used for the production of aluminium —  Preparation and  storage of test samples

B

TC 256 Pigments, dyestuffs and extenders
ISO 787-13:2019 en

fr

General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulphates, chlorides and nitrates

A

ISO 787-15:2019 en

fr

General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of similar types

B

TC 261 Additive manufacturing
ISO/ASTM 52902:2019 en

fr

Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems

F

ISO/ASTM 52904:2019 en Additive manufacturing — Process characteristics and performance — Practice for metal powder bed fusion process to meet critical applications

B

ISO/ASTM 52911-1:2019 en

fr

Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals

D

TC 268 Sustainable cities and communities
ISO 37104:2019 fr1 Sustainable cities and communities — Transforming our cities — Guidance for practical local implementation of ISO 37101

G

TC 279 Innovation management
ISO 56002:2019 en

fr

Innovation management — Innovation management system — Guidance

D

TC 281 Fine bubble technology
ISO 23016-2:2019 en Fine bubble technology — Agricultural applications — Part 2: Test method for evaluating the promotion of the germination of barley seeds

C

TC 282 Water reuse
ISO 20468-2:2019 en Guidelines for performance evaluation of treatment technologies for water reuse systems — Part 2: Methodology to evaluate performance of treatment systems on the basis of greenhouse gas emissions

E

TC 299 Robotics
IEC 80601-2-77:2019 en,fr3 Medical electrical equipment — Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment

BB

IEC 80601-2-78:2019 en,fr3 Medical electrical equipment — Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

XH

TMBG Technical Management Board – groups
IWA 29:2019 fr1 Professional farmer organization — Guidelines

C

JTC 1 Information technology
ISO/IEC/IEEE 8802-1CM:2019 en Telecommunications and information exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1CM: Time-sensitive networking for fronthaul

F

ISO/IEC/IEEE 15289:2019 en Systems and software engineering — Content of life-cycle information items (documentation)

G

ISO/IEC/IEEE 21839:2019 en Systems and software engineering — System of systems (SoS) considerations in life cycle stages of a system

E

ISO/IEC/IEEE 21841:2019 en Systems and software engineering — Taxonomy of systems of systems

B

ISO/IEC 25020:2019 en Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality measurement framework

E

ISO/IEC TR 33018:2019 en Information technology — Process assessment — Guidance for assessor competency

A

ISO/IEC/IEEE 42020:2019 en Software, systems and enterprise — Architecture processes

H

ISO/IEC/IEEE 42030:2019 en Software, systems and enterprise — Architecture evaluation framework

G

ISO/IEC TR 11801-9907:2019 en Information technology — Generic cabling systems for customer premises — Part 9907: Title missing

C

ISO/IEC 29192-7:2019 en Information security — Lightweight cryptography — Part 7: Broadcast authentication protocols

B

ISO/IEC 15938-15:2019 en Information technology — Multimedia content description interface — Part 15: Compact descriptors for video analysis

E

ISO/IEC 19566-5:2019 en Information technologies — JPEG systems — Part 5: JPEG universal metadata box format (JUMBF)

C

ISO/IEC 19566-6:2019 en Information technologies — JPEG systems — Part 6: JPEG 360

D

ISO/IEC 23000-21:2019 en Information technology — Multimedia application format (MPEG-A) — Part 21: Visual identity management application format

F

ISO/IEC 23001-13:2019 en Information technology — MPEG systems technologies — Part 13: Media orchestration

G

ISO/IEC 23008-3:2019/Amd 1:2019 en Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 1: Audio metadata enhancements

F

ISO/IEC 23092-1:2019 en Information technology — Genomic information representation — Part 1: Transport and storage of genomic information

G

ISO/IEC TR 19583-1:2019 en Information technology — Concepts and usage of metadata — Part 1: Metadata concepts

B

ISO/IEC TR 20000-7:2019 en Information technology — Service management — Part 7: Guidance on the integration and correlation of ISO/IEC 20000-1:2018 to ISO 9001:2015 and ISO/IEC 27001:2013

G

Kontakt

Imię i nazwisko (wymagane)

Telefon (wymagane)

Adres email (wymagane)

Treść wiadomości


Dane kontaktowe

Siedziba:

os. Strusia 1A, 31-807 Kraków



Dbamy o jakość!

Masz uwagi lub sugestie. Wypełnij krótką ANKIETĘ na temat naszej strony.

Szukaj we wszystkich serwisach IKMJ