
ISO.org – normy opublikowane w październiku 2019 roku
Nowe normy i standardy opublikowane w październiku 2019 roku:
Grupa cenowa
|
|||
TC 12 | Quantities and units | ||
ISO 80000-3:2019 | en | Quantities and units — Part 3: Space and time |
B |
ISO 80000-11:2019 | en | Quantities and units — Part 11: Characteristic numbers |
F |
TC 17 | Steel | ||
ISO 6935-2:2019 | en | Steel for the reinforcement of concrete — Part 2: Ribbed bars |
D |
ISO 15630-3:2019 | en
fr |
Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel |
E |
ISO 10893-3:2011/Amd 1:2019 | fr | Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of dimensions of the reference notch |
XZ |
TC 22 | Road vehicles | ||
ISO 17987-8:2019 | en | Road vehicles — Local Interconnect Network (LIN) — Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN) |
G |
ISO 8820-8:2019 | en | Road vehicles — Fuse-links — Part 8: Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V |
B |
ISO 21441:2019 | en | Road vehicles — Engine EGR cooler — Heat dissipation test methods |
D |
ISO 20766-18:2019 | en | Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 18: Hose |
B |
ISO 20766-20:2019 | en | Road vehicles — Liquefied petroleum gas (LPG) fuel systems components — Part 20: Filter unit |
A |
ISO/TS 21104:2019 | en | Road vehicles — Liquefied natural gas (LNG) integrated low pressure refuelling and venting connector — 1,8 MPa connector |
B |
TC 27 | Solid mineral fuels | ||
ISO 21398:2019 | en | Hard coal and coke — Guidance to the inspection of mechanical sampling systems |
D |
TC 28 | Petroleum and related products, fuels and lubricants from natural or synthetic sources | ||
ISO 6521-3:2019 | en
fr |
Lubricants, industrial oils and related products (Class L) — Family D (compressors) — Part 3: Specifications of categories DRA, DRB, DRC, DRD, DRE, DRF and DRG (lubricants for refrigerating compressors) |
C |
TC 29 | Small tools | ||
ISO 1711-1:2019 | en
fr |
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets |
A |
ISO 1711-2:2019 | en
fr |
Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact) |
A |
TC 34 | Food products | ||
ISO 20588:2019 | en | Animal feeding stuffs — Vocabulary |
A |
ISO 16820:2019 | en
fr |
Sensory analysis — Methodology — Sequential analysis |
B |
ISO 21572:2019 | en
fr |
Foodstuffs — Molecular biomarker analysis — Immunochemical methods for the detection and quantification of proteins |
D |
ISO/TS 22002-5:2019 | fr | Prerequisite programmes on food safety — Part 5: Transport and storage |
C |
TC 35 | Paints and varnishes | ||
ISO 276:2019 | fr | Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test |
A |
ISO 13076:2019 | en
fr |
Paints and varnishes — Lighting and procedure for visual assessments of coatings |
A |
ISO 22553-1:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 1: Vocabulary |
A |
ISO 22553-2:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 2: Throwing power |
C |
ISO 22553-3:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 3: Compatibility of electro-deposition coating materials with a reference oil |
A |
ISO 22553-4:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials |
B |
ISO 22553-5:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 5: Determination of sieve residue |
A |
ISO 22553-6:2019 | en | Paints and varnishes — Electro-deposition coatings — Part 6: Entry marks |
A |
ISO 8504-1:2019 | en
fr |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles |
A |
ISO 8504-2:2019 | en
fr |
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning |
B |
ISO 12944-5:2019 | fr | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems |
D |
TC 38 | Textiles | ||
ISO 1833-9:2019 | fr | Textiles — Quantitative chemical analysis — Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol) |
A |
ISO 1833-13:2019 | en
fr |
Textiles — Quantitative chemical analysis — Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) |
A |
ISO 1833-14:2019 | fr | Textiles — Quantitative chemical analysis — Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid) |
A |
ISO 1833-17:2019 | fr | Textiles — Quantitative chemical analysis — Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) |
A |
ISO 105-A03:2019 | en
fr |
Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining |
A |
TC 39 | Machine tools | ||
ISO 16092-2:2019 | en
fr |
Machine tools safety — Presses — Part 2: Safety requirement for mechanical presses |
G |
TC 43 | Acoustics | ||
ISO 5130:2019 | fr | Acoustics — Measurements of sound pressure level emitted by stationary road vehicles |
C |
TC 44 | Welding and allied processes | ||
ISO 6947:2019 | en
fr |
Welding and allied processes — Welding positions |
D |
ISO 9090:2019 | en
fr |
Gas tightness of equipment for gas welding and allied processes |
B |
ISO 13919-1:2019 | en
fr |
Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys |
C |
ISO 15607:2019 | en
fr |
Specification and qualification of welding procedures for metallic materials — General rules |
B |
TC 45 | Rubber and rubber products | ||
ISO 2921:2019 | en
fr |
Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test) |
C |
ISO 20927:2019 | en | Rubber compounding ingredients — Precipitated silica — Determination of aggregate size distribution by disc centrifuge |
C |
TC 46 | Information and documentation | ||
ISO 20674-1:2019 | en | Information and documentation — Transliteration of scripts in use in Thailand — Part 1: Transliteration of Akson-Thai-Noi |
C |
TC 58 | Gas cylinders | ||
ISO 11118:2015/Amd 1:2019 | en
fr |
Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods — Amendment 1 |
XZ |
ISO/TS 19016:2019 | en | Gas cylinders — Cylinders and tubes of composite construction — Modal acoustic emission (MAE) testing for periodic inspection and testing |
D |
TC 59 | Buildings and civil engineering works | ||
ISO 16938-1:2019 | fr | Buildings and civil engineering works — Determination of the staining of porous substrates by sealants used in joints — Part 1: Test with compression |
B |
ISO 16938-2:2019 | fr | Buildings and civil engineering works — Determination of the staining of porous substrates by sealants used in joints — Part 2: Test without compression |
B |
TC 60 | Gears | ||
ISO/TR 10064-1:2019 | fr | Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks |
H |
TC 61 | Plastics | ||
ISO 20337:2018 | fr | Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus |
B |
ISO 16620-2:2019 | en | Plastics — Biobased content — Part 2: Determination of biobased carbon content |
D |
ISO 16929:2019 | en
fr |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
B |
TC 63 | Glass containers | ||
ISO 12821:2019 | en
fr |
Glass packaging — 26 H 180 crown finish — Dimensions |
A |
TC 67 | Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries | ||
ISO 3183:2019 | en | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
D |
TC 68 | Financial services | ||
ISO 13492:2019 | en | Financial services — Key-management-related data element — Application and usage of ISO 8583-1 data elements for encryption |
C |
ISO 10962:2019 | en | Securities and related financial instruments — Classification of financial instruments (CFI) code |
G |
TC 71 | Concrete, reinforced concrete and pre-stressed concrete | ||
ISO 1920-6:2019 | en | Testing of concrete — Part 6: Sampling, preparing and testing of concrete cores |
B |
ISO 20987:2019 | en | Simplified design for mechanical connections between precast concrete structural elements in buildings |
G |
TC 76 | Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use | ||
ISO 21881:2019 | en | Sterile packaged ready for filling glass cartridges |
E |
ISO 21882:2019 | en | Sterile packaged ready for filling glass vials |
D |
TC 79 | Light metals and their alloys | ||
ISO 26202:2019 | en | Magnesium and magnesium alloys — Magnesium alloys for cast anodes |
B |
TC 83 | Sports and other recreational facilities and equipment | ||
ISO 8061:2019 | en
fr |
Alpine ski-bindings — Selection of release torques values |
A |
TC 87 | Cork | ||
ISO 2067:2019 | en | Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content |
A |
TC 94 | Personal safety — Personal protective equipment | ||
ISO 13287:2019 | en
fr |
Personal protective equipment — Footwear — Test method for slip resistance |
D |
ISO 374-2:2019 | en | Protective gloves against dangerous chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
B |
ISO 374-4:2019 | en | Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
B |
ISO 17492:2019 | en | Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat |
D |
ISO 27065:2017/Amd 1:2019 | en
fr |
Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers — Amendment 1: Surrogate test chemical |
XZ |
ISO 16073-1:2019 | en | Wildland firefighting personal protective equipment — Requirements and test methods — Part 1: General |
C |
ISO 16073-3:2019 | en | Wildland firefighting personal protective equipment — Requirements and test methods — Part 3: Clothing |
A |
ISO 16073-8:2019 | en | Wildland firefighting personal protective equipment — Requirements and test methods — Part 8: Hearing |
A |
ISO 18640-1:2018/Amd 1:2019 | en
fr |
Protective clothing for firefighters — Physiological impact — Part 1: Measurement of coupled heat and moisture transfer with the sweating torso — Amendment 1 |
XZ |
ISO 18640-2:2018/Amd 1:2019 | en
fr |
Protective clothing for firefighters — Physiological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters — Amendment 1 |
XZ |
TC 104 | Freight containers | ||
ISO 20854:2019 | en | Thermal containers — Safety standard for refrigerating systems using flammable refrigerants — Requirements for design and operation |
G |
TC 106 | Dentistry | ||
ISO 9693:2019 | en
fr |
Dentistry — Compatibility testing for metal-ceramic and ceramic-ceramic systems |
B |
TC 107 | Metallic and other inorganic coatings | ||
ISO 14713-2:2019 | en
fr |
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 2: Hot dip galvanizing |
D |
ISO 21874:2019 | en | PVD multi-layer hard coatings — Composition, structure and properties |
B |
TC 119 | Powder metallurgy | ||
ISO 4489:2019 | fr | Hardmetals — Sampling and testing |
A |
ISO 4884:2019 | fr | Hardmetals — Sampling and testing of powders using sintered test pieces |
A |
TC 120 | Leather | ||
ISO 11410:2019 | en | Leather — Guidelines for packaging of wet blue leather |
A |
TC 121 | Anaesthetic and respiratory equipment | ||
ISO 20789:2018 | fr | Anaesthetic and respiratory equipment — Passive humidifiers |
F |
ISO 19223:2019 | fr | Lung ventilators and related equipment — Vocabulary and semantics |
A |
TC 126 | Tobacco and tobacco products | ||
ISO 20779:2018/Amd 1:2019 | fr | Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an intense smoking regime — Amendment 1 |
XZ |
TC 127 | Earth-moving machinery | ||
ISO 6750-1:2019 | en
fr |
Earth-moving machinery — Operator’s manual — Part 1: Contents and format |
D |
TC 131 | Fluid power systems | ||
ISO/TR 10946:2019 | fr | Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports |
B |
ISO 20145:2019 | en
fr |
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers |
D |
ISO 3601-1:2012/Amd 1:2019 | fr | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes — Amendment 1 |
XZ |
TC 134 | Fertilizers, soil conditioners and beneficial substances | ||
ISO 15958:2019 | en | Fertilizers — Extraction of water soluble phosphorus |
A |
TC 138 | Plastics pipes, fittings and valves for the transport of fluids | ||
ISO/TS 22499:2019 | en | Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing |
D |
TC 146 | Air quality | ||
ISO 12039:2019 | en | Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems |
G |
ISO 10312:2019 | en
fr |
Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method |
G |
ISO 13794:2019 | en
fr |
Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method |
G |
TC 147 | Water quality | ||
ISO 21675:2019 | en | Water quality — Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water — Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS) |
F |
TC 154 | Processes, data elements and documents in commerce, industry and administration | ||
ISO 20415:2019 | en | Trusted mobile e-document framework — Requirements, functionality and criteria for ensuring reliable and safe mobile e-business |
E |
TC 159 | Ergonomics | ||
ISO 24509:2019 | en | Ergonomics — Accessible design — A method for estimating minimum legible font size for people at any age |
F |
ISO 24550:2019 | en
fr |
Ergonomics — Accessible design — Indicator lights on consumer products |
B |
ISO 24551:2019 | en
fr |
Ergonomics — Accessible design — Spoken instructions of consumer products |
B |
TC 172 | Optics and photonics | ||
ISO 10110-1:2019 | en
fr |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General |
F |
TC 182 | Geotechnics | ||
ISO 17892-10:2018 | fr | Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests |
D |
ISO 17892-11:2019 | fr | Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests |
D |
ISO 18674-5:2019 | en
fr |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 5: Stress change measurements by total pressure cells (TPC) |
E |
ISO 22477-4:2018 | fr | Geotechnical investigation and testing — Testing of geotechnical structures — Part 4: Testing of piles: dynamic load testing |
G |
TC 184 | Automation systems and integration | ||
ISO/TS 10303-1288:2019 | en | Industrial automation systems and integration — Product data representation and exchange — Part 1288: Application module: Management resource information |
B |
ISO/TS 10303-1362:2019 | en | Industrial automation systems and integration — Product data representation and exchange — Part 1362: Application module: Dimension and tolerance callouts |
B |
ISO/TS 15926-4:2019 | en | Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 4: Initial reference data |
B |
TC 190 | Soil quality | ||
ISO 17616:2019 | en
fr |
Soil quality — Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials |
B |
ISO 21365:2019 | en
fr |
Soil quality — Conceptual site models for potentially contaminated sites |
F |
TC 197 | Hydrogen technologies | ||
ISO 19880-8:2019 | en | Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control |
F |
TC 199 | Safety of machinery | ||
ISO 13857:2019 | en
fr |
Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
D |
TC 204 | Intelligent transport systems | ||
ISO/TS 19468:2019 | en | Intelligent transport systems — Data interfaces between centres for transport information and control systems — Platform independent model specifications for data exchange protocols for transport information and control systems |
H |
ISO/TS 21185:2019 | en | Intelligent transport systems — Communication profiles for secure connections between trusted devices |
D |
ISO/TS 21192:2019 | en | Electronic fee collection — Support for traffic management |
E |
ISO/TS 21193:2019 | en | Electronic fee collection — Requirements for EFC application interfaces on common media |
F |
TC 206 | Fine ceramics | ||
ISO 20504:2019 | fr | Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of compressive properties |
C |
ISO 21821:2019 | en | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of densification properties of ceramic powders on natural sintering |
B |
ISO 22197-2:2019 | en | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde |
C |
ISO 22197-3:2019 | en | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene |
B |
TC 207 | Environmental management | ||
IEC 62430:2019 | en,fr | Environmentally conscious design (ECD) — Principles, requirements and guidance |
BD |
ISO 14007:2019 | en
fr |
Environmental management — Guidelines for determining environmental costs and benefits |
D |
TC 212 | Clinical laboratory testing and in vitro diagnostic test systems | ||
ISO/TS 20914:2019 | fr | Medical laboratories — Practical guidance for the estimation of measurement uncertainty |
G |
TC 215 | Health informatics | ||
ISO/TS 21526:2019 | en | Health informatics — Metadata repository requirements (MetaRep) |
F |
ISO/TS 22077-4:2019 | en | Health informatics — Medical waveform format — Part 4: Stress test electrocardiography |
E |
TC 224 | Service activities relating to drinking water supply, wastewater and stormwater systems | ||
ISO 24536:2019 | en | Service activities relating to drinking water supply, wastewater and stormwater systems — Stormwater management — Guidelines for stormwater management in urban areas |
G |
ISO 46001:2019 | fr | Water efficiency management systems — Requirements with guidance for use |
F |
TC 229 | Nanotechnologies | ||
ISO/TS 21236-1:2019 | en | Nanotechnologies — Clay nanomaterials — Part 1: Specification of characteristics and measurement methods for layered clay nanomaterials |
D |
TC 286 | Collaborative business relationship management | ||
ISO 44002:2019 | en | Collaborative business relationship management systems — Guidelines on the implementation of ISO 44001 |
G |
TC 292 | Security and resilience | ||
ISO 22301:2019 | en
fr |
Security and resilience — Business continuity management systems — Requirements |
D |
TMBG | Technical Management Board – groups | ||
IWA 30-1:2019 | en | Competence of standards professionals — Part 1: In companies |
E |
IWA 30-2:2019 | en | Competence of standards professionals — Part 2: In standards-related organizations |
F |
CASCO | Committee on conformity assessment | ||
ISO/IEC 17029:2019 | en
fr |
Conformity assessment — General principles and requirements for validation and verification bodies |
E |
JTC 1 | Information technology | ||
ISO/IEC 30146:2019 | en | Information technology — Smart city ICT indicators |
C |
ISO/IEC 25066:2016 | fr | Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for Usability — Evaluation Report |
F |
ISO/IEC 14776-224:2019 | en | Information technology – Small computer system interface (SCSI) — Part 224: Fibre Channel Protocol for SCSI, fourth version (FCP-4) |
H |
ISO/IEC 15067-3-3:2019 | en | Information technology — Home Electronic System (HES) application model — Part 3-3: Model of a system of interacting Energy Management Agents (EMAs) for demand response energy management |
E |
ISO/IEC 20085-1:2019 | en | IT Security techniques — Test tool requirements and test tool calibration methods for use in testing non-invasive attack mitigation techniques in cryptographic modules — Part 1: Test tools and techniques |
C |
ISO/IEC 20543:2019 | en | Information technology — Security techniques — Test and analysis methods for random bit generators within ISO/IEC 19790 and ISO/IEC 15408 |
F |
ISO/IEC 24761:2019 | en | Information technology — Security techniques — Authentication context for biometrics |
G |
ISO/IEC 30111:2019 | en | Information technology — Security techniques — Vulnerability handling processes |
C |
ISO/IEC 15444-1:2019 | en | Information technology — JPEG 2000 image coding system — Part 1: Core coding system |
H |
ISO/IEC 15444-15:2019 | en | Information technology — JPEG 2000 image coding system — Part 15: High-Throughput JPEG 2000 |
G |
ISO/IEC 23008-8:2018/Amd 1:2019 | en | Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance specification for HEVC — Amendment 1: Conformance testing for HEVC screen content coding (SCC) extensions and non-intra high throughput profiles |
XZ |
ISO/IEC 23092-2:2019 | en | Information technology — Genomic information representation — Part 2: Coding of genomic information |
H |
ISO/IEC TR 30148:2019 | en | Internet of Things (IoT) — Technical requirements and application of sensor network for wireless gas meters. |
E |